Great video I also found it hard to listen with the music playing turn the music way down or off but very informative. I appreciate it. I’m going to try and adjust the regulator down on my rifle.
Nicely presented again 🙂 I'm very interested about these Regs without Bell washers or Spring to control pressure. Can you show us how they work? Such small adjustments making significant changes in pressure. A nice take down of the Reg would be much appreciated, cheers.
Es fantástica esa arma!! No hay problema en disparar ese tipo de munición con Katran L?? Airmaks fabrica el Katran X para munición tipo “slug”… yo pensaba que katran L solo debe disparar balines. Gracias por compartir tus conocimientos y pruebas. Un saludo
Hola, me puedes decir cuál es la medida en milimetros ( o el numero de vueltas desenroscadas) que sobresale el tornillo dorado para dejarlo original de fábrica y a cuantos bares está? Muchas gracias, un saludo desde España. DAVID.
congratulations great video! but I increased the pressure a little but now I found an anomaly! why does it shoot louder when the tank is halfway through? instead it shoots slower when the tank is full! 😰
It because the pressure when you are now at 4500 psi in side the Plenum is making it harder for the valve to open so as the pressure goes lower the valve can open more either increase your hammer strike or lower your regulator pressure
806 fps to 832 fps.. hooked up.. something not lekker there with the tuning or the 33 gr or reg.. thats a BIG spread for a regulated gun.. still not to bad.. love your vid's.. thanks!
Actually except for the first 2 shots the numbers were very close and this can be resolved with little more hammer spring tension fo a harder strike Even though it looks like I'm tethered in the video I'm simply keeping the gun connected to avoid wasting air to bleed off and disconnect
Great video I also found it hard to listen with the music playing turn the music way down or off but very informative. I appreciate it. I’m going to try and adjust the regulator down on my rifle.
Nicely presented again 🙂 I'm very interested about these Regs without Bell washers or Spring to control pressure. Can you show us how they work? Such small adjustments making significant changes in pressure. A nice take down of the Reg would be much appreciated, cheers.
Es fantástica esa arma!! No hay problema en disparar ese tipo de munición con Katran L?? Airmaks fabrica el Katran X para munición tipo “slug”… yo pensaba que katran L solo debe disparar balines. Gracias por compartir tus conocimientos y pruebas. Un saludo
No hay problema de disparar el arma funciona perfectamente sin problemas allí el regulador podría ser un poco más consistente
Hola, me puedes decir cuál es la medida en milimetros ( o el numero de vueltas desenroscadas) que sobresale el tornillo dorado para dejarlo original de fábrica y a cuantos bares está? Muchas gracias, un saludo desde España. DAVID.
I would also be interested in that. Thank you
congratulations great video! but I increased the pressure a little but now I found an anomaly! why does it shoot louder when the tank is halfway through? instead it shoots slower when the tank is full! 😰
It because the pressure when you are now at 4500 psi in side the Plenum is making it harder for the valve to open so as the pressure goes lower the valve can open more either increase your hammer strike or lower your regulator pressure
@@AfricanAirOrdnancethanks!!Could it be helpful to increase or decrease the valve spring tension?
Soy un nuevo seguidor y me gusta lo que haces😉
Espero que muestre proto un vídeo del krait de airmaks.... es lo más nuevo de la marca.. felicidades 👏
Buenos días, solo estoy esperando que la versión de barril de 700 mm llegue a nuestro mercado una vez que eso suceda, compraré uno para revisar
What is the name of the music playing?
Not Sure
Distraction
what is the sequence of washers in katran?
@@HussienAhmed-i6q no idea 💡
806 fps to 832 fps.. hooked up.. something not lekker there with the tuning or the 33 gr or reg.. thats a BIG spread for a regulated gun.. still not to bad.. love your vid's.. thanks!
Actually except for the first 2 shots the numbers were very close and this can be resolved with little more hammer spring tension fo a harder strike Even though it looks like I'm tethered in the video I'm simply keeping the gun connected to avoid wasting air to bleed off and disconnect
So that air tube connection to the breech is only retained by that tiny screw?
Yes
what size is it exactly? i cannot find it anywhere? 0.9mm?? I really need to know
I have no idea
Hi great videos are you going to try later on the krait x with 700mm barrel
Yes, once the 700-barrel version becomes available here
How many the régulateur is adjusted From factory?
1 10 th of a turn backwards from factory setting
Have you made a power kit for the Katran yet?
Not yet
@@AfricanAirOrdnance ok hopefully soon 👍🎯💯
Informative,thanks.
Handy video, maybe keep the music down or off, hard to hear what you're saying sometimes,Or is it just me?🤐
What’s moderator are you using??
It's from Kral
What is your thoughts on the Krait ?
I like the design Im just waiting on the 700mm barrel version to arrive and then I will buy one to review
الصواب إزالة الكاتم لمعرفة التجميع الحقيقي
The correct thing is to remove the muffler to see the real assembly
Súng bắn như bòi