@@АндрійМатвєєв-е2у I love the little thing... reliable, super accurate (in single action) despite the size and short sight radius but man that recoil is a bit more than a little distracting! Also , the weight of that double action is also quite insane, far worse than the 1895 Nagant.
Evaporust great stuff use over and over again. I've got some I've had for years only used it once. I love it. Great Job. And God Bless. God Guts and Guns made America.
These guns look like they were stored at the bottom of a dirty lake for decades. Super nice work bringing them back. I thought I knew a little about guns until I see what you can do. I know very little.
i would recomend to polsih the gun a bit with fine sandpaper befor bluing. It will make the final result much better. Either way good job and keep making videos.
Thanks for the tip, I polish with a 8 inch bench grinder with a buffing pad and compound. I haven't done it very often because I don't want to lose marking on the gun. Thanks for watching
@@TheKinzlerBrosmagnificent hand work please that lubricant your using yellow colour Seal it saying in that plastic container? Where can we purchase it please!.
Amazing how blueing almost became bronzing, great look for the pistol. Thanks for the gel test, looks like it was nearly freezing that day making the gel more resistant but the pistol delivering 100% . If it's cold enough I guess gel could be almost bullet proof. Somehow the video was over too quickly, I was looking forward to your next restoration.
That hot blue turned out really nice and another fine resto! Man, from the meticulous and professional restoration to the amazing close up videography, you guys only get better all the time! I could watch these for hours👍🏼👍🏼 God Bless you boys and God Bless America!🇺🇸🇺🇸🇺🇸🇺🇸
Cute little pistol. Might be a smart choice for a CC, actually. Interesting it fires the 9x18 - that is not a light cartridge. Kind of a shame the cartridge is 'out of favor.' Reassembly looked like a hemorrhoid-inducing chore. She's a beaut now, you really breathed life back into her. 🙂
I am always curious why you use WD-40 for the post-bluing soak instead of the more tried and true non-detergent motor oil or kerosene, as WD-40 does contain significant solvents mixed with its lubricant. However, it did result in a fascinating colour on that slide, so perhaps it was worth it this time. Well done, great video and pretty informative restoration.
Hi another great restoration....too long to see your vidéo, i wait about it evrey Day....some idea for gun : luger p08, tokarev, 1892 st Étienne, walter ppk, nambou, usm1, etc.....every gun of ww2....i live in France and it s a great pleasure to see you doing gunsmith....thans for all and please qickly another vidéo of your wonderful restoration....❤😊❤😊
Well sorry to tell ya but we have not fished in over two years and are not anymore. I hope I don’t lose you as a viewer and supporter. But I understand if you leave. This just is not a good area to fish constantly.
Love your videos, I did have a question, though. With guns that end up with a lot of pitting, does that affect the function after restoration or do you do any smoothing of parts after? I would think that if there was pitting on the frame and slide it might affect operation or even potentially bind in some cases.
Your Brothers made it already up again to be my favorite channel! The work, shooting and informative entertainment was very huge gentlemen! It's just me or is it a Walther copy? Never believed that one could hit the target as you did with the polish made, never noticed that the polish police wear other side arms as Makarov in my younger years..Just it liked had to be you did it men! God's Blessings from Northern Germany Ludwig.
The magazine spring is weak, it doesn't extend fast enough to catch the slide after the last round is fired. Otherwise, not much seems to be needed; as you note, the chrome-lined barrel and chamber look just fine. Although, the return spring looked too short to me (comparing with similarly constructed pistols I have, though I don't have this model). I'd replace it (especially in the case of blowback gun).
@@cvp0 I know that. For the ones that they do recover from that, they explicitly show it. I know some of them are also barn finds or even commissioned work. I was just curious where they got this example from is all.
Well we get emails everyday from people around the country with their best up rusted and fire damaged firearms. We sort through the people that are serious in getting their heirloom or just favorite firearms restored. It’s a long process. Hope this helps. I have my own FFL license to I can get the firearms.
It's not even the glock 9mm either. This gun never had a sensory plate the automatics have. It even works differently compared to electro tasers, billy clubs, tear gas cannisters, riot helmets with face shields, and riot shields. 🛡 ⛽️ 🛡 🔫 😳 👌 😍 💪 🙌 🔫
It's good to see a P64 brought back. I have a P64 manufactured in 1976... not fun to shoot, but a pleasure to look at (unissued).
Ya for sure, nice! Ya they are different. Thanks for watching
so called fingerbreaker =)
@@АндрійМатвєєв-е2у I love the little thing... reliable, super accurate (in single action) despite the size and short sight radius but man that recoil is a bit more than a little distracting! Also , the weight of that double action is also quite insane, far worse than the 1895 Nagant.
This is my favorite restoration I've watched you do so far.
Well thanks for the kind words and for watching!
@@TheKinzlerBrosДивився з задоволенням! Привіт з України!
I remember these guys magnet fishing. They’ve come along way with their videos! Incredible.
I appreciate that. We stopped that because of the area we live in. This is a true passion
Oops another troll lol
i also greatly appreciate the grace and respect which you handle these firearms with
Thank you for the kind words, we appreciate you!
My first service weapon. Greetings from Poland.
Nice, thanks for watching!
i had one chambered in .380 ACP, it was wonderful.
Awesome restoration and incredible 2 tone look !
Thank you, I like it too. Thanks for watching!
Мастерски выполнена работа. Смотрел с большим удовольствием🔥🔥🔥
Thank you very much we appreciate it, thanks for watching!
Evaporust great stuff use over and over again. I've got some I've had for years only used it once. I love it. Great Job. And God Bless. God Guts and Guns made America.
Yes it is, thanks we appreciate it! Thanks for watching!
nice to see great firearm storage
Thanks we appreciate it!
These guns look like they were stored at the bottom of a dirty lake for decades. Super nice work bringing them back. I thought I knew a little about guns until I see what you can do. I know very little.
Ya they were severely neglected, I'm sure you know a lot! Thanks for watching
i would recomend to polsih the gun a bit with fine sandpaper befor bluing. It will make the final result much better. Either way good job and keep making videos.
Thanks for the tip, I polish with a 8 inch bench grinder with a buffing pad and compound. I haven't done it very often because I don't want to lose marking on the gun. Thanks for watching
@@TheKinzlerBros Watching you put the springs back in brought back fond memories of mine in .380ACP. Wonder where that thing got off too?
Классная работа,браво!!!
Thank you, thanks for watching!
Magnifica restauración 🎉🎉
Thank you, thanks for watching!
Nice touch with the hot bluing. Solid gun!
Thanks we appreciate it, thanks for watching!
To say I love your work is a real understatement. Keep up the good work
Seb 🇦🇺
Thank you for the kind words we appreciate you! Thanks for watching
@@TheKinzlerBrosmagnificent hand work please that lubricant your using yellow colour Seal it saying in that plastic container? Where can we purchase it please!.
Amazing!!! Absolutely amazing restoration!!!
Thank you very much for the kind words, thanks for watching!
great variant on the bluing process to give a bronze look to the slide!
Thanks, I like it too! Thanks for watching
Outstanding work. That is a sweet little pistol.
Thank you very much, yes it is. Thanks for watching!
Fantastic, I am always amazed, thanks
Thank you, we appreciate you watching!
Outstanding camera work on this - really impressive. PPK copy. Nice!
Thank you very much! Yes it is. Thanks for watching!
Bardzo ładny, pięknie odnowiony!
Thank you, thanks for watching!
Came out great and is now one of a kind because your choice of 2 tone can never be exactly replicated. Love watching your videos.
Thank you, absolutely! We appreciate your support!
Awesome restore!!! Thank you
Thanks Daniel, thanks for watching!
Pistol restored nicely, as usual! That chrome really protected the rifleing. And the collection grows again!😊
Thanks buddy we appreciate it, yes it did! Thanks for watching
@@TheKinzlerBros is this a real restoration or a fake
These guys are one of the few real restorers along with backyard ballistics @@Ukrainetoyrusubanexplorer
Gut Gemacht!
Thank you!
beautiful work!!
Thank you, we appreciate it!
Excelente trabajo. 👍👍
Thank you very much!
Yeah the P64 is a good little pistol. I carried one for a few years. The recoil doesn’t bother me. My wife hates shooting it though.
Ya they're a solid little gun! I bet she did, thanks for watching!
Young boy , very good work .
Thanks we appreciate it!
Nice restore and pistol to add to your collection.
Thanks, this was a customer's! Thanks for watching
Very nice! I love the two tone bluing, too.
Thanks, ya me too! Thanks for watching
Trabalho de restauração impecável! ☺️👍⭐⭐⭐⭐⭐
Thank you Marcio!
Amazing! looks great!
Thank you, thanks for watching!
Great job! Two tone looks good too.
Thanks, Steven. Ya we like it! Thanks for watching
Magnifique ❤❤❤❤😊
Thank you, thanks for watching!
The two-tone is awesome
Thanks, I like it too!
Great job. Great talent. Thanks for the video.
Thank you and thanks for watching!
Simply awesome. Great job!
Thank you very much!
I've watched your videos for a few months now. Y'all earned a new subscriber. Thanks for providing quality gun restoration content.
Thanks we appreciate it, thanks for watching!
Amazing how blueing almost became bronzing, great look for the pistol. Thanks for the gel test, looks like it was nearly freezing that day making the gel more resistant but the pistol delivering 100% . If it's cold enough I guess gel could be almost bullet proof. Somehow the video was over too quickly, I was looking forward to your next restoration.
great restoration, kinda unfortunate that you had to remove the original finish but the end result was worth it.
Thanks, ya it always is! Thanks for watching
great gun
Thanks!
Another resurrection of a fallen firearm. You’re the best Brandon. Hello to your brother fore me. See you on the next. 😊
Thanks so much Martin. Cheers
that 2 tone is nice
Thanks, we like it too! Thanks for watching
Gostei porque vc faz os testes das armas ganhou um escrito
Thanks we appreciate it, thanks for watching!
That was awesome! It turned out great!
Thanks again!
Very good restoration.
Keep it up!
Thanks, will do!
Parabéns pelo belo trabalho. 👏🏻
Thank you I appreciate the comment
That hot blue turned out really nice and another fine resto!
Man, from the meticulous and professional restoration to the amazing close up videography, you guys only get better all the time! I could watch these for hours👍🏼👍🏼
God Bless you boys and God Bless America!🇺🇸🇺🇸🇺🇸🇺🇸
Thank you very much for all the kind words, we appreciate your support! Absolutely and thanks for watching!
Nice Restoration, you've come a long way in your restoration process.
Thank you very much, thanks for watching
Awesome video brother great restoration 💪
Thanks buddy, we appreciate it!
@@TheKinzlerBros anytime
Great job! You're gonna need a vault for all your guns...lol
Thanks, You got that right! Someday hopefully. Thanks for watching!
Видео огонь👍👍👍🤝👊
Thank you very much!
Hi Brandon , Another beautiful restoration , 6 out of 6 again , top job and marksmanship of course , keep up the great work .
Thanks Pete, we appreciate your comments! Thanks for watching
Nice work as always ❤❤
Thanks we appreciate you!
great job bro👍👏
Thanks!
Cute little pistol. Might be a smart choice for a CC, actually. Interesting it fires the 9x18 - that is not a light cartridge. Kind of a shame the cartridge is 'out of favor.' Reassembly looked like a hemorrhoid-inducing chore. She's a beaut now, you really breathed life back into her. 🙂
Ya I like it alot, it ejects the spent cartridges farther than any gun I've shot too! Ya the ammo part sucks. Thanks for watching!
Really love the videos keep up the good work.
Thanks, will do!
I am always curious why you use WD-40 for the post-bluing soak instead of the more tried and true non-detergent motor oil or kerosene, as WD-40 does contain significant solvents mixed with its lubricant. However, it did result in a fascinating colour on that slide, so perhaps it was worth it this time. Well done, great video and pretty informative restoration.
It helps cure the hot bluing process, thanks for watching!
Hi another great restoration....too long to see your vidéo, i wait about it evrey Day....some idea for gun : luger p08, tokarev, 1892 st Étienne, walter ppk, nambou, usm1, etc.....every gun of ww2....i live in France and it s a great pleasure to see you doing gunsmith....thans for all and please qickly another vidéo of your wonderful restoration....❤😊❤😊
Thank you very much we appreciate you, we get them out as fast as we can. We both still work full time. Thanks for the suggestions and for watching!
Very cool guys!
Thank you!
@TheKinzlerBros your welcome!
As Borat would say, "very nice!" 👍👍
Haha nice! Thanks we appreciate it!
Nice story
Thanks
❤
Thanks
Dam good work
Thank you we appreciate it!
super, nie bales sie strzelac, pozdrawiam
Thanks, absolutely! Thanks for watching
what a headache to tear down. two tone looks killer on this one boys
Ya it wasn't fun, thanks we appreciate it!
nice job
Thanks!
Nice video 😀 🙂
Thanks 😀
The Miracle Brothers Gunsmith Shop. ' We get it shootin. Its a Miracle'
Absolutely, thanks George!
Are you guys still going to be magnet fishing when the weather permits?
Well sorry to tell ya but we have not fished in over two years and are not anymore. I hope I don’t lose you as a viewer and supporter. But I understand if you leave. This just is not a good area to fish constantly.
North Dakotans do not throw their guns in rivers, nothing to fish.😅
Where do you find all your guns to?
Two tone bluing? Very tasty,....
Absolutely, I like it too! Thanks for watching
Always enjoy your videos a great deal. Keep em coming!
Thanks we appreciate it! Will do!
another nice job ;)
Thanks Johnny!
Love your videos, I did have a question, though. With guns that end up with a lot of pitting, does that affect the function after restoration or do you do any smoothing of parts after? I would think that if there was pitting on the frame and slide it might affect operation or even potentially bind in some cases.
Thank you very much for the support, external pitting doesn't affect the firearm. Internal definitely can. Thanks for watching
Nice one as always!
Thanks again!
They say. Pitting. Adds. Character to. Gun. But i think its. More like. Neglect.
Ya it's both, thanks for watching!
❤❤❤❤
Thank you
Your Brothers made it already up again to be my favorite channel! The work, shooting and informative entertainment was very huge gentlemen! It's just me or is it a Walther copy? Never believed that one could hit the target as you did with the polish made, never noticed that the polish police wear other side arms as Makarov in my younger years..Just it liked had to be you did it men! God's Blessings from Northern Germany Ludwig.
Thank you very much Ludwig! It is Polands version of a Makarov and also looks like a walther ppk. We appreciate the kind words and the support!
love that one, sounds amazing when its fired. 😎👍
Ya me too, yes it does! Thanks for watching
Another brought back from the dead, awesome!
Thank you we appreciate it, thanks for watching!
I have this gun in perfect condition 😃😃
Well that’s awesome
So many pieces for such a small weapon
I agree it has a lot more than it seemed need but it has a cartridge indicator and also a de cocker. Thanks for watching
The magazine spring is weak, it doesn't extend fast enough to catch the slide after the last round is fired. Otherwise, not much seems to be needed; as you note, the chrome-lined barrel and chamber look just fine. Although, the return spring looked too short to me (comparing with similarly constructed pistols I have, though I don't have this model). I'd replace it (especially in the case of blowback gun).
Thanks for the comments and summary we appreciate it! Thanks for watching
If there is no Evapo Rust, is there any similar substance?
Idk, google similar items to evaporust and you should find something. Good luck and thanks for watching!
Where do you guys find these? Just curious. Otherwise yet another quality and soothing video. Thanks for sharing!
They go magnet fishing
@@cvp0 I know that. For the ones that they do recover from that, they explicitly show it. I know some of them are also barn finds or even commissioned work. I was just curious where they got this example from is all.
Well we get emails everyday from people around the country with their best up rusted and fire damaged firearms. We sort through the people that are serious in getting their heirloom or just favorite firearms restored. It’s a long process. Hope this helps. I have my own FFL license to I can get the firearms.
@@TheKinzlerBros Nice. That just means more content from you guys haha, as it appears you’re getting more and more exposure. Thanks for the info!
piękna robota, ale P-64 to kupa złomu. znajdź i odrestauruj pistolet Vis wz. 35. Fabryki Broni w Radomiu. to jest cacko. ;)
Thanks, ya they all cant be gems. Ill try, thanks for watching!
Радом известный город оружейников... Так же как Тула... Брно или Льеж. Не мудрено нашëлся ржавый ПМ на старом польском чердаке😂
Alright, thanks for watching!
With all do respect you should always replace all the springs in any gun that old
Ya I do for the most part, thanks for watching we appreciate it!
I'm just a comment to like :)
Well I liked it
wowi
Thank you
@@TheKinzlerBros A LOT OF LOVE AND TNK A LOT MR.Bro FOR YOU FROM IRAQ...🇮🇶🇮🇶🇮🇶$%&*-+;'😎❤️❤️🩹❤️🔥💯💥💜💙🤍🖤🌹🌹🌹🌹🌹🌷🌷🌷🌹🌷...
Não estava enferrujada de verdade, apenas oxidada.
It is still rust, thanks for watching
I would like acquire rusted firearms to be restored. Could you recommend any sources for that? Thanks, enjoy the vids!!
Online auctions, estate sales, friends. Thanks for watching
Cold war
Yes
Tiếp đi ạ
Thanks for watching
ŁUCZNIK -> Archer...
Thanks for watching
easy to store in a bag of salted water for a few days to create the problem ;-)
I don't think so, not on this channel bud! Thanks for watching
Je to podvod!
I don't think so, thanks for watching!
lol i wait for the slap on the gel every time
Ya, you gotta do it!
It's not even the glock 9mm either. This gun never had a sensory plate the automatics have. It even works differently compared to electro tasers, billy clubs, tear gas cannisters, riot helmets with face shields, and riot shields. 🛡 ⛽️ 🛡 🔫 😳 👌 😍 💪 🙌 🔫
Thanks for the info George! Thanks for watching