O Ebay é o melhor lugar para comprar um ferrolho completo. Seu rifle é um K98 ou um M48? Ou outra coisa? É importante obter o ferrolho de tamanho adequado para o seu rifle específico.
@@ericschulze5641 The tip of the firing pin and the entire lower part of the firing pin touches nothing: it is suspended in a 1/4" hole surrounding the pin, while the upper part of the pin with the spring resides above that hole in a larger 1/2" hole. That was the reason for making this fixture. I suppose I did a poor job describing it.
NOTE: Although I've removed the extractor so that I can check headspace later, the extractor collar also needs to be removed and is done later. DO NOT insert the bolt into the receiver with the extractor collar still attached, otherwise it will become stuck.
@@Никита-л7ы1э В прикладе К98 есть, но в прикладе М48, нет специального места. The K98 and similar rifles have a disassembly hole in the stock, but the M48 does not, as I mention in the video. Even so, for someone who has not done the disassembly before and whose bolt may be sluggish with cosmoline, disassembly using the stock or buttstock hole can be risky.
I can't thank you enough sir. This is very helpful.
Thank you.
Does the bolt need to be greased at all or will light oil be fine?
@@donaldotrump9863 The bolt should be dry while shooting; afterwards a very light coating of oil can be used before storing the rifle away.
Como faço para a dequiri um ferrolho desse
Como faço pra mim a dequiri um ferrolho desse
O Ebay é o melhor lugar para comprar um ferrolho completo. Seu rifle é um K98 ou um M48? Ou outra coisa? É importante obter o ferrolho de tamanho adequado para o seu rifle específico.
Your going to bend the tip of your fireing pin with your cute, creative, brilliant, disassembly block
@@ericschulze5641 The tip of the firing pin and the entire lower part of the firing pin touches nothing: it is suspended in a 1/4" hole surrounding the pin, while the upper part of the pin with the spring resides above that hole in a larger 1/2" hole. That was the reason for making this fixture. I suppose I did a poor job describing it.
@PalKrammer ahh so the lower half has a smaller hole
NOTE: Although I've removed the extractor so that I can check headspace later, the extractor collar also needs to be removed and is done later. DO NOT insert the bolt into the receiver with the extractor collar still attached, otherwise it will become stuck.
I am using an empty catridge case. But yes, it's not as safe as your solution.
в прикладе специальное место для разборки ударника!!!!!
о ужас((((
@@Никита-л7ы1э В прикладе К98 есть, но в прикладе М48, нет специального места.
The K98 and similar rifles have a disassembly hole in the stock, but the M48 does not, as I mention in the video. Even so, for someone who has not done the disassembly before and whose bolt may be sluggish with cosmoline, disassembly using the stock or buttstock hole can be risky.