Watching this while taking a lunch break from working on my own project car. Thanks for all the rotary content! I wasn't very familiar with them before this series and I'm learning a lot.
That's kind of the issue most people just do stuff halfassed and then blame the engine. Yea the engine has to be done VERY specific, but you should don't your research right? 🤷🏿♂️ #savethebrap
Brad better hope their running 1/8th mile, or else going to be in trouble. That’s if his motor doesn’t lock up on first fire up because of all the water in the cylinders!
Hey, can anyone tell me what the name of that classical song is? It sounds like the song that a Rugby team in Ireland sing, it's known in that case as "Stand up and Fight".
Ive seen people use Vaseline to lube all the surfaces in the motor assembly. What was the red lubricant? Kinda looks like a lithium grease i use on heavy machinery.
Don't get me wrong I want the varges boy's to win but pretty sure even they couldn't show me how to build a rotary! shit I'll build Brad's ls spray and walk away tomorrow and I've never built an engine! respect to the varges brother's!
It is similar when putting it together if you know what you're doing...... But the downside is anything goes wrong..... You're tearing that keg open again 😭 trust me I have a couple engines sitting in my garage waiting for rebuild money 😂
@@StellarGale more concerned on special tools ,and like u say clearances ect ,or having things balanced or machined knowing is half the battle doing my research and just trying to recover from a major surgery,so appreciate your positive advice ,makes me just wanna get the seal kit and go for it! Be nice to have some references or a buddy down the street with experience..deff bit doubting myself ,need as much information as I can,but prob end up at rx7vargas shop lol
Hearing the classical music makes me feel like a man of culture
*holding my beer with my pinky out
Naturally, while building a rotary.
*vaping with my pinky out ;)
comment gold XD
Vargas: "The secret to building a rotary that nobody else will tell you..."
Grinding wheel: "WWWEEEEEEEEEEEEEARRRRRRRRRRRRGH!"
Love the contrast of these two builds. Vargas brothers build with precision and years of experience. Brad’s build...”spray and pray and spray again”.
Theres something almost magical about classical and opera over time lapse videos
Maybe have Vargas vs Vargas in a few seasons time just to see who is the greatest Vargas of them all
Mike for sure... He is crazy
good morning america!! thanks for posting for early European gang
Kaneda Morning, always great waking up to these lol
At first I thought i saw blood but i was like nah these guys are gods they dont bleed
Watching this while taking a lunch break from working on my own project car. Thanks for all the rotary content! I wasn't very familiar with them before this series and I'm learning a lot.
Hert we need another FD update !! I already went back and watched all the old videos. Best duo ever the Vargas x Hert 😎 I could watch all day
Fascinating. Also love the choice of background music for this one, opera rules!
Love the Vargas team and all this extra content.
Love watching these guys work, dope to pull the curtain back on what makes rotarys so sick
You guys must have hands like surgeons.. the level of accuracy you need to build these things properly is crazy
i ate my morning muffin feeling so proper listening to classic watching a rotor being built~! i love you guys haha
Keep the Vargas content coming 👍
Dude Mike is frikkin awsome!!!!!
Yes he is
Man there’s something about opera and building engines. They go perfectly together..🦉
Bc of Vargas I fell in love with rotaries
Rip my sleep schedule you’ve ruined me hoonigan
Yes you’ll be 6 minutes and 41 seconds late for bed, oh noooooo!!!!!!!!
Damn!!! The music is perfect👌
The classical opera was a surprisingly nice touch to all of this.
Simply beautiful
Thank you professor Vargas!!
Is it me or does mike Vargas make you feel so welcomed? I love the Vargas bros ✊🏼
Next time use glass for sanding. I work with fiber optics and this is how we get smooth ends.
Very educational!
I had a Doritos ad before this!
These damn videos r all Over the place lol
Should u have posted this vid b4 the engine build? Hah
Carlos Cedillo Bonus Channel is the behind the scenes of the video but released before the actual video
Dario Kie yeah I know that but will be nice to have the bonus vids in order lol
free content that’s very good, i don’t mind the order
@@ImJoel "free content that is very good" while I can agree, the content is free, it being "very good" is VERY debatable...
Mike good on talking job..and his brother keep working..
More Opera!!!! All Opera soundtrack all the time!!
Damn,just imagine how many rotors you'd have to blow to get this good lol!
Digging the Carmen
These engines look so complicated and simple at the same time.
I've always wanted to rebuild a rotary just for funzies... Super Vargas Bros make me feel like I could probably do it.
Awesome video, wish I knew what they were saying while pressure washer blasting and die grinders screaming
The next build battle battle sould be drifting i wanna see dan build a buget drifting car like if you wanna se it
De Bruyn Van Zyl lol isn’t the g35 just that
Yes i supose so but it wohld bd fun to see to people build dirft cars form a straight budget go see what modifications do and parts
Dorito power 🔥
Is Hert putting in extra time to get all these rotory videos out?
Thomas Halley you know it!... he’s got a sign that says “will work for rotary content”
@@CTemple82 for real?
@C. Temple can I check that?
Heerrrt
Man, electric motors look like a child's play comparing to this!
Do you know how to build one or how much power do they have??
MrAcDc2000 correction yes
TORRRREADOR!
hes brothers skill is the touch
The next build battle discipline should be drifting. Show me how to build a budget drifter.
How to be the best at UA-cam!
Nice I listen to classical and Christian. God spoke straight fire through a bush, imagine what he does through rappers,
Rotor Ryan Da money and da bitchez in da club
Dont do me like that with that music boi
DORITO POWER!!!!!!
4th rotary build on hoonigan 0 finished car built!
Never knew the tolerance was so tight in a rotary
That's kind of the issue most people just do stuff halfassed and then blame the engine.
Yea the engine has to be done VERY specific, but you should don't your research right? 🤷🏿♂️
#savethebrap
Henry Winkler would be happy
The simplest engine is also the most complicated engine
Brad better hope their running 1/8th mile, or else going to be in trouble. That’s if his motor doesn’t lock up on first fire up because of all the water in the cylinders!
Damn I'm confused 😂
Thanks for watching air noise
Man I love doritos
i want hour of this
Please, more Opera time lapses.
I want rotary gang to win so bad
Why did I have a dorito commercial for this video
team bad daddy
Hert, pace yourself young fella.
Hey, can anyone tell me what the name of that classical song is?
It sounds like the song that a Rugby team in Ireland sing, it's known in that case as "Stand up and Fight".
Will there be a third gen vargas to continue the rotary legacy??
Yes my daughter
Ive seen people use Vaseline to lube all the surfaces in the motor assembly. What was the red lubricant? Kinda looks like a lithium grease i use on heavy machinery.
Jacob Mincks Vaseline melts in heat which it was over 100 each day assembly lube doesn’t
@@angelmotorsports oh okay so cause the weather was so hot in that location it becomes more of a liquid? Makes sense. Thank you.
What's the name of the Opera song used? I've had it stuck in my head since Martin Prince sung it The Simpsons years ago lol
Toreador's March, by Bizet, from the Carmen Overture
@@sarahmathias9463 thank you very much
What ... I thought their engine was done
You guys gotta do something about the noises
You do realise this is not a live feed?
@@danielssonsgarageomg whaaat? ... no way ... Mind = blown ... lol
So Vargas is Rotary Daddy can we call his brother rotary uncle
Don't get me wrong I want the varges boy's to win but pretty sure even they couldn't show me how to build a rotary! shit I'll build Brad's ls spray and walk away tomorrow and I've never built an engine! respect to the varges brother's!
my money is on bad all the way, have you seen hist t-bucket !!!!!!!!!!!!! he knows how to eek out power.
Samuel Ortiz have you seen literally ANYTHING else he’s built?
bryan maynard 😂😂😂😂
Can someone explain why the apex seals are the most important part?
What is that red grease?
El lucevan le stelle
Looks like the rotors was lightened not look like stock. CNC those rotors not cheap
torerador prend garrrrrde
Should have posted this BEFORE they built the engine...in sequence fellas
I enjoy the bonus videos on the building battle but why are so many about vargas's and no bad daddy Braddy very much he's had 2 or 3 bonus videos
On the previous video of Brad, he did mention he wasnt filming much of his build, thus the lack of footage.
We need CC for this episode jeez. My deaf ass hardly made out anything through all the white noise of air tools.
Loving this series. But Brad needs to town down the scumbaggery
This should be in the episode! stop putting it on this channel 🤣😂
How 2 rotary.
Wouldn’t this of been better to see before they ported and built the engine?
How much clearance
Man seals are cheap in the states unless you leaving bits out on that invoice
Meriacan dollars bro!.... plus nzs gay gst shit!
Alot of companies making seals. They range from 200 to 500
@@MikeVargasAngelMotorsports They mentioned in another clip that they use Goopy seals, which retail for $350USD/set
@@firelizard2 You just tagged a Vargas and told him what they use. I'm sure he knows what parts he buys.
firelizard2 we didn’t use goopy seals
These videos want to make me build a rotary to get
Song? Anyone?
$1500 rotary build my ass! How much did the lightened rotors cost Vargas?!? Rotors are flat on the sides from the factory not milled out😂
I commented on that too. You can see all the CNC markings
Song name ?
Am I wrong in assuming a rotary engine has simpler assembly than a piston engine?
Joseph Samsor they make it seem very easy, but I wonder the same thing
it actually is very simple in comparison but it's got its own set of issues and troubles
It is similar when putting it together if you know what you're doing......
But the downside is anything goes wrong..... You're tearing that keg open again 😭 trust me I have a couple engines sitting in my garage waiting for rebuild money 😂
I wonder what mikes daily is
FD
Nice
fuck it i could go to sleep later
mid night
Finally a video without Brad yapping in his nonsense version of English. Vargas bros ftw!
I had a Mazda with a Miller cycle engine and it was the worst motor ever
Whomever edited this video get in a jeep xj with sarah price
Rotory outcast. Mike youtube channel
This thing is all backwards didn't you already show a video and being assembled. Lol
i feel like brad build coverage is lacking. maybe have zak team with the rad daddy for coverage. just sayin.
Hmmmmm dosen't look too hard!🤔🤔🤔🤔🤔🤔 the clearencing looks a bit eeeepppaaa yo no se
It's rotary it's simple. It just needs accuracy and patience to make everything right and precise so it'll be fast and efficient
@@StellarGale more concerned on special tools ,and like u say clearances ect ,or having things balanced or machined knowing is half the battle doing my research and just trying to recover from a major surgery,so appreciate your positive advice ,makes me just wanna get the seal kit and go for it! Be nice to have some references or a buddy down the street with experience..deff bit doubting myself ,need as much information as I can,but prob end up at rx7vargas shop lol
Uummmm. I think Vargas should stick to building engines lol I cant even believe he thinks talking over a pressure washer is a smart idea
welcome to Vargas Bonus Channel
#hooniganhatesbrad #onewayfilimingdotcom #alienatesubscribers
If he doesn't film anything for them to post...
They filmed us more cause we did more work it’s pretty common sense , how many clips do you want of brad hammering the firewall over and over 😂
First
👎
there can be only one!!