Great work wasi . My amplifier clip light just will not turn off I know that it has a fault .some one say it is a bad resistor because it plays crocky. Some one says it the resistor.can this be true . It's a qsc mx3000
Hello friend. I don't know if you can help me. I have a cvr amplifier with 1 burnt channel. It burned mosfets and the driver that is on a separate pci. I managed to solve the mosfets but not the driver because it is scratched. Can you tell me what is the model of this ic? Thank you very much for your attention.
Hey man great job I’m having a problem with my CVR amplifier 3302. I’m wondering if you can help me. I think it’s not putting enough output power to the speaker any suggestions?
That is a fairly new amplifier as long as your getting signal in and out on both channels then amplifier is working as it should. The problem without seeing your setup i would have to say your speakers are not wired properly, if you are using more that 2 woofers per channel disconnect and only do one speaker per channel if it plays better then connect the second speakers in parallel not series. Positive terminals to Positive. You can also check to make sure your getting enough amps to the amplifier 120v 15amps or 20amps. Amplifier can also be ran at 220v so do check your distribution setup. Hopefully that helps.
Any advise on cvr 3002 amplifier? The amplifier got wet in the rain but not for a long. It played well for a few weeks but now.....when I put it on and use it for a while it start to electric shock when I touch it. How can I fix this issue?
i know im asking randomly but does any of you know of a way to log back into an instagram account..? I was dumb forgot my password. I would love any assistance you can offer me
@Kaden Kaiden thanks so much for your reply. I found the site thru google and im trying it out atm. Seems to take a while so I will reply here later with my results.
Would love to have an advise..... is the admark amplifiers better than cvr? By power or stability ?
Great work wasi . My amplifier clip light just will not turn off I know that it has a fault .some one say it is a bad resistor because it plays crocky. Some one says it the resistor.can this be true .
It's a qsc mx3000
Hello friend. I don't know if you can help me. I have a cvr amplifier with 1 burnt channel. It burned mosfets and the driver that is on a separate pci. I managed to solve the mosfets but not the driver because it is scratched. Can you tell me what is the model of this ic? Thank you very much for your attention.
Thanks a lot Wasi, I am a newbie in amplifier repairs, do you train pple to repair amps??
Hey man great job I’m having a problem with my CVR amplifier 3302. I’m wondering if you can help me. I think it’s not putting enough output power to the speaker any suggestions?
That is a fairly new amplifier as long as your getting signal in and out on both channels then amplifier is working as it should. The problem without seeing your setup i would have to say your speakers are not wired properly, if you are using more that 2 woofers per channel disconnect and only do one speaker per channel if it plays better then connect the second speakers in parallel not series. Positive terminals to Positive. You can also check to make sure your getting enough amps to the amplifier 120v 15amps or 20amps. Amplifier can also be ran at 220v so do check your distribution setup. Hopefully that helps.
Hello why does CVR amp makes clicking sound when on.?
I need fix my amp how can I contact you
Any advise on cvr 3002 amplifier?
The amplifier got wet in the rain but not for a long. It played well for a few weeks but now.....when I put it on and use it for a while it start to electric shock when I touch it. How can I fix this issue?
What's your taughts about sinbosen amplifier
Check C55 It was short blowing R42 and D5 on the power supply on my 4ch Q3002
Great video sir really appreciate it can I get some of those old amplifier board 👍 👍 🙏 🙏
hello sir. I have a Powersoft M50Q. the power supply is on fire. what is the type of mosfet transistor. please help me.thank's before
Contact (954) 444-0819 Wasi repair services wasient.com
Do you repair crown macro tech 5000vz, and where is your shop located ?
Pretty much any amplifier. Contact wasi wasi on Facebook.
@@Djshaw1kinglegend ok thanks
Love your videos but please get a HD camera lol.
Love the work you do bro
Thanks 👍🏾
Do you do online training. If yes please I would love to participate. Please I need your contact.
That a good tip on protecta yout ampilier.
Yard man big up!
WASI!!!!!... please I have a k6 and need to upgrade it so I would like to talk to you.
Contact on Facebook @wasiwasientertainment thanks for watching and please subscribe for more information vids.
What cause the cvr lights to start blink orange
Blood fire
You're tossing entire boards for trace damage and corrosion. Wow!
i know im asking randomly but does any of you know of a way to log back into an instagram account..?
I was dumb forgot my password. I would love any assistance you can offer me
@Deandre Hugo instablaster :)
@Kaden Kaiden thanks so much for your reply. I found the site thru google and im trying it out atm.
Seems to take a while so I will reply here later with my results.
@Kaden Kaiden it worked and I now got access to my account again. I am so happy!
Thank you so much you really help me out!
@Deandre Hugo glad I could help :)
Upon
Lie