I was moments from losing the will until you showed me the rubber seal and foam edge could be moved out the way of the lower bolt.. Had all the wrong tools too, got there...Genuine big thanks to you fella.. There was a clip you missed on the vid that pulls the battery clamp up as you position the new battery, or it's stuck on a tilt. But I wouldn't have been close without the vid.. ...Cheers
Many thanks for the video! Had to mention that the late model B6's are identical. I couldn't work out why in all the video's for the B6 the "battery bay" looked different! So this proceedure works for the earlier B6's too. And big thanks to Audi (sic) for making it so painful just to change a battery!
Just done this job. My advice is if you don’t have a very long (8 inches) Allen key don’t attempt it until you have one. Not sure what mm as the one I used had no markings. It’s a pig of a job, German engineering at its finest. Fair play for doing the video mate, esp one handed!
Thanks for this post I have to say it was that hidden Alen Bolt that threw me, I couldn't see it at first but once the rubber wiring harness moved out of the way and with a torch I could see the litte twat! Very awkward to get at, I used a long extention Allen socket & even when bolt fully loosened off I still couldn't get the plate or the battery out, that metal strutt and the pipes really get in the way! I figured out that by using the plastic long tab that is attached to the retaining plate & sliding it accross to the right towards the Pollen filter & get it out of the way this allows the battery out easier
I had to do this job earlier today on my own car. It looks more awkward to do if you dont have the correct tools. I used a long extention bar on a cordless drill with a 6mm allan key bit in it to get in at the fastener clip. I also disconnected the fused terminal off the positive to give me more space to remove the old battery. I put the new one in, clipped the sealed loom back into place and then fitted the terminals back on and put a small amount of copper grease on the terminals to preserve them.
Surely to god, the manufacturers could've come up with a more convenient system for holding a battery in place? I mean, a fucking Allen key down in the dungeon of the car, and you have to remove all that stuff to get access? Fuck-off. They design a great* car but can't design a simple release system? Shite. Back in the day the battery could be removed and replaced in about 90 secs. Great video, friend, thanks for the tutorial 👍
I removed the battery to clean out the leaves and crap from underneath and reconnected it now the ESP light stays on and my remote central locking has stopped working .any suggestions ?
whilst battery out check drain holes etc are clean and oil the allen bolt...makes it easier next time ... If drain holes get blocked water will ingress car....
Drain holes ( actually rubber bungs with slots that clog up !) are under battery tray and the other is under near brake servo ( uk cars). I found best way is to use a stiff plastic ( so it doesn't damage paintwork) thing like you get on drills to control depth etc and tackle the drain hole from the engine bay below.....you'll know you've found it when water gushes down and out....I do mine monthly....
how to do stuff on cars I just inspected mine years after my official dealership tech replaced it for me. They forgot to reinsert the vent tube. I saw it sitting in there next to the battery! Pushed it in and all sorted now. :)
Can you imagine you need youtube and instructions to remove a battery. I gave up. Just can't wait to get rid of this shit, I have it for 4 years and never EVER again want an Audi.
The computer has to be RESET by the dealer when you REMOVE the battery.. just my .2 cents. I work at Advance Auto Parts and I've seen what happens if you uninstall a battery that needs a cpu reset 2005 Audi a4 2.0t - 6speed MT 2011 bmw 328i M-Sport - SOLD
I was moments from losing the will until you showed me the rubber seal and foam edge could be moved out the way of the lower bolt.. Had all the wrong tools too, got there...Genuine big thanks to you fella.. There was a clip you missed on the vid that pulls the battery clamp up as you position the new battery, or it's stuck on a tilt. But I wouldn't have been close without the vid.. ...Cheers
Thanks for this. The location of the bolt was a mystery to me.
Cheers for the heads up on the bolt. Was doing my head in trying to get the battery out without knowing about it being held in place😂
Thanks for showing me, now I know, I've got a Audi A4, s line, my battery has gone flat, and now I know how to change it,
Many thanks for the video! Had to mention that the late model B6's are identical. I couldn't work out why in all the video's for the B6 the "battery bay" looked different! So this proceedure works for the earlier B6's too. And big thanks to Audi (sic) for making it so painful just to change a battery!
Glad it helped!
Just done this job. My advice is if you don’t have a very long (8 inches) Allen key don’t attempt it until you have one. Not sure what mm as the one I used had no markings. It’s a pig of a job, German engineering at its finest. Fair play for doing the video mate, esp one handed!
I think it was a 3/16 key
Thanks, didn't know what was holding the battery in. BTW, the auto-generated subtitles on your video are a laugh (I'm deaf).
Exactly as it was. Thanks for taking the time to make this video. Problem sorted.
Thanks for this post I have to say it was that hidden Alen Bolt that threw me, I couldn't see it at first but once the rubber wiring harness moved out of the way
and with a torch I could see the litte twat! Very awkward to get at, I used a long extention Allen socket & even when bolt fully loosened off I still couldn't
get the plate or the battery out, that metal strutt and the pipes really get in the way! I figured out that by using the plastic long tab that is attached to the retaining plate & sliding it accross to the right towards the Pollen filter & get it out of the way this allows the battery out easier
I had to do this job earlier today on my own car. It looks more awkward to do if you dont have the correct tools. I used a long extention bar on a cordless drill with a 6mm allan key bit in it to get in at the fastener clip. I also disconnected the fused terminal off the positive to give me more space to remove the old battery. I put the new one in, clipped the sealed loom back into place and then fitted the terminals back on and put a small amount of copper grease on the terminals to preserve them.
A great help with the most ridiculous place to put a battery EVER! Prepare to struggle.Audi what were you thinking?
Many thanks for this - I couldn't work out how to remove that rubber to get to the allen key bolt.
Good one fella
Your vid came in very handy
I was stumped til I saw it 👍
Thanks for the demonstration,helped me to remove this bad ass battery from my Audi B7!
Thanks for the video, saved me a lot of time and knuckle skin.
Thanks for all the effort you took to show how bloody awful it is to change a battery. Put me off doing it!
glad it helped to show how hard it was to get to the bolt
Worked a charm. Thanks very much
what a pain in the butt job, bad engineering Audi
i appreciate your time and work..
Cheers bud , I have a 04 which I thought was a B6 , but mine is the same set up as yours .
Thanks! I needed to know I can lift off that padded section..
Cheers mate helped me out immensely
no problem
I had hell getting that allen bolt out.
Surely to god, the manufacturers could've come up with a more convenient system for holding a battery in place? I mean, a fucking Allen key down in the dungeon of the car, and you have to remove all that stuff to get access? Fuck-off. They design a great* car but can't design a simple release system? Shite. Back in the day the battery could be removed and replaced in about 90 secs.
Great video, friend, thanks for the tutorial
👍
Thanks dear it's very helpful
Glad it was helpful!
Thank you - that was very helpful!
Thanks for the awesome guide.
I removed the battery to clean out the leaves and crap from underneath and reconnected it now the ESP light stays on and my remote central locking has stopped working .any suggestions ?
appreciate the upload, cheers!
silly question. but how do you adjust the blocks in the base left to allow a bigger battery to be fitted?...Mine seem fixed...! Good video by the way.
whilst battery out check drain holes etc are clean and oil the allen bolt...makes it easier next time ... If drain holes get blocked water will ingress car....
Where are the drain holes located ?
Drain holes ( actually rubber bungs with slots that clog up !) are under battery tray and the other is under near brake servo ( uk cars). I found best way is to use a stiff plastic ( so it doesn't damage paintwork) thing like you get on drills to control depth etc and tackle the drain hole from the engine bay below.....you'll know you've found it when water gushes down and out....I do mine monthly....
@@fransam1961 Cheers bud .
Thanks for the vid. Do you know if a vent tube is required? I didn't see you connect a vent tube to the battery. Not sure if one is needed.
a can not remember if it had 1
how to do stuff on cars I just inspected mine years after my official dealership tech replaced it for me. They forgot to reinsert the vent tube. I saw it sitting in there next to the battery! Pushed it in and all sorted now. :)
Any idea how long it should take to remove the bolt? I've been turning for over an hour and the battery still won't budge.
Should be done. 2 years now
@@edpakes6878 no he's still at it
@@GoodBlokeOutdoors Hahahahaha lads lol
Any progress on the battery, are you still turning the bolt?
Still going
amazing how something that should be so simple is made so bloody difficult. who hell decided to put the battery there!!!?
chris webb MUSIQUE
MuSiQuE
probably an Audi engineer
Thank you, helpful
Can you imagine you need youtube and instructions to remove a battery.
I gave up. Just can't wait to get rid of this shit, I have it for 4 years and never EVER again want an Audi.
And basically had to climb inside the hood just to take it out. It's got some weight on it.
And afther change .....reprograming????
This ENGINEERING was badly done. Why should a battery be hidden and removing it becoming a job?
You've never seen a hybrid I'm guessing
It's a 6mm hex
Found alot of water under the battery. Has anyone got the same issue?
yes, remove the rubber bungs so the water can drain out.. or eventually it will fill up enough and fuck with the relays under ur ecu
And as you whispered ,it is a frigging nightmare , who in the hell @ Audi designed that load of shizzle ?
yes it was hard to get too
The computer has to be RESET by the dealer when you REMOVE the battery.. just my .2 cents. I work at Advance Auto Parts and I've seen what happens if you uninstall a battery that needs a cpu reset
2005 Audi a4 2.0t - 6speed MT
2011 bmw 328i M-Sport - SOLD
not true