Lee Auto Disk setup
Вставка
- Опубліковано 7 вер 2024
- How to select the correct disk when using Lee Auto disk to charge cases with the appropriate powder measure.
Here is a link to the chart (it is the instruction form for the auto disk). It is a great start to picking the right cavity on the auto disk.
leeprecision.c...
Thanks for the video. The Lee chart recommended #57 for my load but that was to light. I used one size bigger # 61 and the powder charge was right on.
I have found that most of the recommendations from LEE are a little light. I always start there and go up as needed just like you describe.
Thanks for a clear explanation been looking for this all day just looking to get started into reloading
I guess im asking randomly but does any of you know a tool to log back into an instagram account??
I stupidly lost the account password. I love any tricks you can offer me.
@Andrew Elliot Instablaster =)
@Finnley Kye Thanks for your reply. I got to the site thru google and I'm in the hacking process atm.
Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
@Finnley Kye It worked and I actually got access to my account again. Im so happy!
Thanks so much you really help me out !
@Andrew Elliot you are welcome :D
Love the JB weld ,, also brass nuts..😁
thanks dude
Very helpful. I forgot how to use my press after years of not using it. Couldn't remember how to use the disks. Thank you.
Glad it helped
The screws for the powder measure that the breasts nuts hold 6 by 32 what you can do that I did go to the hardware store and buy 6 by 32 one-and-a-half a hell of a lot better screwing them in and out hopes this helps.
Can you please post a link to the CC conversation chart
Thank you john
I have posted a link - from Lee's website - in the description. Hope it helps and thanks for watching.
so do brasil como faço pra ter uma tabela dos discos
It's difficult to focus on the loading data you are holding in front of the camera when it is moving around. Otherwise this is a very informative video. :-)
leeprecision.com/auto-disk-riser.html
Auto disk riser. Great for getting your powder out of the way.
For some reason my disc looks like it is not fully going over hole to dump powder..soooo confused!
Run it with the red hopper off, see if the entire hole in the disk goes over the hole in the press. Remember, the hole in the press is much larger, so it may be fine..... but definitely check.
@@murphyfirearmstraining3630 thank you very much..i found the fix..die needed to be lowered a thread or two
Cant find chart on site. Need disc number for 9mm 115gr and 124 gr Hodgdon CFE Pistol powder..please help..lol
Cfe Pistol isn't showing a load for fmj in 115 or 124 grain for 9mm in the lee modern reloading manual.
However for cfe Pistol, here is the auto disk starting points:
0.30 = 4.0gr
0.32= 4.2 gr
0.34 = 4.5gr
0.37=4.9gr
0.40=5.3gr
0.43=5.7gr
0.46=6.1gr
That should get you a starting load.
Thank you very much! I appreciate ya!!