I might also add that a Lee powder funnel fits directly onto the powder charge die, in place of the powder measure, and then you can drop weighed or measured charges by hand, maintaining the progressive function. Just maintain a regime to avoid the possibility of forgetting a charge, and ending up with an empty case.
I appreciate and thank you for your comments. The .270 is a fine cartridge--my personal favorite. However, it's too much capacity for the Lee Double Disk system, so I suggest that you modify your loading to a single stage system for that cartridge. The Double Disk system will accommodate up to about 45+ grains of powder, more or less, which is about perfect for .308 size cases but 15 grains less than .30-06 size cases.
The disk system has a maximum capacity of approximately 45 grains, depending on the density of the powder used. The .30-06 case, on which the .270 is based, has a capacity of approximately 60 grains. It is certainly possible to rig a drum style powder measure atop the turret, using any number of options. The .270 is my favorite cartridge, but never one that I loaded in volume, so individual charges have always been quite satisfactory. But call Lee if you want to speed things up.
LOL, gunblue I just started reloading a couple of months ago. I'm 60 and love just shooting. I'm also a master machinist for close to 40 yrs. so the art of reloading is up my field. I love the way you speak and show how to do it. Man you had me thinking on that one!! I live in Colo. hope to one day meet you. :) Thanks for betting back. God Bless
I'm in the process of setting up a new loading bench, and my video is now higher resolution. I hope to re-do the series with greater clarity very soon under one filming session, and correct that setup error. Accuracy and attention to detail is my goal. However, you might want to watch the single segment I made while reloading 7mm-08, which shows the operation under full rotation in the appropriate direction. Thanks for your interest and God Bless!
GunBlue490 That would be really cool to see. I will keep comming back for the update. I am envious of your setup and hope to have one similiar to yours one day. Cheers!
Hi. I was hoping you could also give me some insight into which Lee Reloading Press is better....I recently asked you some questions about the Lee 4-hole Turret press and through your prompt replies, not to mention your videos, was definitely given confidence in going ahead to purchase Lee Turret Press model 90064 to do my .270 Winchester ammunition which was cool cause you said it was one of your favorite cartidges, but while I was hunting for the Lee 90064 I came across one of Lee's other presses which was the Lee Load-Master press which apears to do the same processes with a similar mechanism but yet has a different body to it where by the main body of the press takes on a "D" or "O" shape casting like the one that may be behind you in your video. Could you give me some tips on if I'm better off to continue looking for the 90064 4-hole tuuret press, or if I should consider the Load-Master press even thou the Load-Master might be more costly. Any info wouldbe greatly appreciated especially when there are so many manufactures, presses, accessories, etc and so making it quite confusing to know what's best. Incase it helps, along with wanting a Lee press for doing my .270, I am also wanting the same press that is equally user-friendly for doing let's say 45cal and other handgun ammunition as well.
I just helped a friend set up his Classic Turret Press with your instructions and they were quite helpful. Thanks! However you said the stations index clockwise and that’s how I set them but when we were done and installed that auto turning rod, his press indexed counter-clockwise. I checked a couple of other videos and they were indexing counter-clockwise too. Is yours possibly an older press and Lee changed the rotation?
Flavio, You are entirely correct, and it makes you the first prize winner to catch me. I've been known to make mistakes, but I try not to be noticed. Good catch, and keep it between us! ;-)
It's best to simply wipe them out with a clean cloth that has a bit of solvent on it, and then wipe completely clean. Powder contains graphite. Do not add any other dry lubes. Then, just store them in a dry place, or with a desiccant can. However, your plastic powder handling equipment, such as funnels, can be washed with warm water and Dawn dish detergent, and wiped dry WITHOUT rinsing. The detergent will leave an invisible film that will help to prevent static cling. After that, the graphite will do its own thing and the plastic will become conditioned forever. Keep everything simple.
Thank you for sharing your knowledge on the Lee press setup. Excellent video !!! What method do you use for cleaning the brass and lubing it prior to sizing?
Is it common or prohibitavely expensive for the average reloader (or beginner like me) to get a separate turret for each set of dies so you could have a convenient preset for every caliber you reload? My buddy just gifted me a used Lee Classic, and I haven't set it up yet to see if all the parts are there, and since I know there are accessories I'll have to buy, I'm wondering if it's worth it to do that.
gunjunky7520, I'm sorry I didn't see your post earlier. Turrets for the machine are quite inexpensive, so I always get one for each set of dies. In addition, I order the red cylindrical storage case that holds a four-hole turret with the dies, and keeps them fresh and dustless. Invert the base upside down to use with the turret. There are many discount houses for Lee equipment that have good prices on the equipment.
Do I seat the powder die all the way down to the bullet holder? I just started setting up my Lee turret loader and have been watching your tutorials, But I didn't see how far to seat die.
Each of the Lee sets is different, and have different requirements, also depending on the use of different powder dispensers. Simply follow the instructions in the printed instructions that come with each die and powder dispenser, and you will be good. It's very simple.
Yeah Lee definitely didnt do a great job with the instruction manual. Almost everyone recommends this press as a good beginner press, yet the directions provides little detail on installation steps. Thank you sir.
nono559 Those instructions are correct, for those desiring to return their brass to minimum, original factory dimensions. I neglected to explain that most bolt action rifles, for which these were loaded, will shoot more accurately when minimally sized, without camming over. This is one of my oldest loading videos, done when I was limited to time constraints. I produced newer ones. If you engage in loading, first understand what each process is accomplishing. Resizing dies exist for the purpose of fitting a brass case back to your rifle, and when it has accomplished that objective, sizing beyond that point unnecessarily work hardens brass and loosens its fit, thereby reducing accuracy. I suggest testing a sized case in the chamber to determine if that has been accomplished. If the bolt won't close easily, tighten the die more and cam over until it does.
+mhrfarms They are the same threads, yes. Just read the enclosed literature that comes with them, as they are different, more accurate, and much easier to use, and require no locking screw that stays tighter, but can be released simply with fingers. I recommend Mr/ Lee's loading manual.
+GunBlue490 thanks for the quick replies I really enjoy the easy way you present your videos I have another questionFrom the lee website"The free play in the turret is normal. Without it, the turret would not move correctly. Make sure that the die is adjusted to compensate for the free play" ok that is fine but I noticed a lot of movement up and down and I can see that over time ,the turrets or the machine itself will wear and cause issueswhat is your opinion on thisthanks
GunBlue490 thanks man. I received an 28 yr old lee turret press with perfect powder measure (used only once to deprime). It looks similar to yours but im not sure. I have no idea how to set it up. Could i possibly email you pictures and have you take a look a it?
Thank you for all the informative videos you have made to share your knowledge
Amazing video & Information ! Thank you !
I might also add that a Lee powder funnel fits directly onto the powder charge die, in place of the powder measure, and then you can drop weighed or measured charges by hand, maintaining the progressive function. Just maintain a regime to avoid the possibility of forgetting a charge, and ending up with an empty case.
GunBlue490
Or double charged. Bad news!
I appreciate and thank you for your comments. The .270 is a fine cartridge--my personal favorite. However, it's too much capacity for the Lee Double Disk system, so I suggest that you modify your loading to a single stage system for that cartridge. The Double Disk system will accommodate up to about 45+ grains of powder, more or less, which is about perfect for .308 size cases but 15 grains less than .30-06 size cases.
Nice review. Straight forward and understandable.
Thanks
The disk system has a maximum capacity of approximately 45 grains, depending on the density of the powder used. The .30-06 case, on which the .270 is based, has a capacity of approximately 60 grains. It is certainly possible to rig a drum style powder measure atop the turret, using any number of options. The .270 is my favorite cartridge, but never one that I loaded in volume, so individual charges have always been quite satisfactory. But call Lee if you want to speed things up.
Great series of instructions, thank you.
LOL, gunblue I just started reloading a couple of months ago. I'm 60 and love just shooting. I'm also a master machinist for close to 40 yrs. so the art of reloading is up my field. I love the way you speak and show how to do it. Man you had me thinking on that one!! I live in Colo. hope to one day meet you. :) Thanks for betting back. God Bless
I'm in the process of setting up a new loading bench, and my video is now higher resolution. I hope to re-do the series with greater clarity very soon under one filming session, and correct that setup error. Accuracy and attention to detail is my goal. However, you might want to watch the single segment I made while reloading 7mm-08, which shows the operation under full rotation in the appropriate direction. Thanks for your interest and God Bless!
GunBlue490 That would be really cool to see. I will keep comming back for the update. I am envious of your setup and hope to have one similiar to yours one day. Cheers!
Love this press.Great video.Thanks!
Hi. I was hoping you could also give me some insight into which Lee Reloading Press is better....I recently asked you some questions about the Lee 4-hole Turret press and through your prompt replies, not to mention your videos, was definitely given confidence in going ahead to purchase Lee Turret Press model 90064 to do my .270 Winchester ammunition which was cool cause you said it was one of your favorite cartidges, but while I was hunting for the Lee 90064 I came across one of Lee's other presses which was the Lee Load-Master press which apears to do the same processes with a similar mechanism but yet has a different body to it where by the main body of the press takes on a "D" or "O" shape casting like the one that may be behind you in your video. Could you give me some tips on if I'm better off to continue looking for the 90064 4-hole tuuret press, or if I should consider the Load-Master press even thou the Load-Master might be more costly. Any info wouldbe greatly appreciated especially when there are so many manufactures, presses, accessories, etc and so making it quite confusing to know what's best. Incase it helps, along with wanting a Lee press for doing my .270, I am also wanting the same press that is equally user-friendly for doing let's say 45cal and other handgun ammunition as well.
I just helped a friend set up his Classic Turret Press with your instructions and they were quite helpful. Thanks! However you said the stations index clockwise and that’s how I set them but when we were done and installed that auto turning rod, his press indexed counter-clockwise. I checked a couple of other videos and they were indexing counter-clockwise too. Is yours possibly an older press and Lee changed the rotation?
gunblue,
you said that the Lee Turret Classic turns clockwise. I'm sorry but mine turns counter clockwise. What I'm I missing?
Flavio,
You are entirely correct, and it makes you the first prize winner to catch me. I've been known to make mistakes, but I try not to be noticed. Good catch, and keep it between us! ;-)
Do you have to DE grease the dies when you get them from the factory and put a dry lube on them to prevent the powder from sticking?
It's best to simply wipe them out with a clean cloth that has a bit of solvent on it, and then wipe completely clean. Powder contains graphite. Do not add any other dry lubes. Then, just store them in a dry place, or with a desiccant can. However, your plastic powder handling equipment, such as funnels, can be washed with warm water and Dawn dish detergent, and wiped dry WITHOUT rinsing. The detergent will leave an invisible film that will help to prevent static cling. After that, the graphite will do its own thing and the plastic will become conditioned forever. Keep everything simple.
Thank you for sharing your knowledge on the Lee press setup. Excellent video !!!
What method do you use for cleaning the brass and lubing it prior to sizing?
you mentioned that the press advances clockwise, but it looks like it advances counterclockwise
Whatever shall we do!
Nice video. Really good info!
Is it common or prohibitavely expensive for the average reloader (or beginner like me) to get a separate turret for each set of dies so you could have a convenient preset for every caliber you reload? My buddy just gifted me a used Lee Classic, and I haven't set it up yet to see if all the parts are there, and since I know there are accessories I'll have to buy, I'm wondering if it's worth it to do that.
gunjunky7520, I'm sorry I didn't see your post earlier. Turrets for the machine are quite inexpensive, so I always get one for each set of dies. In addition, I order the red cylindrical storage case that holds a four-hole turret with the dies, and keeps them fresh and dustless. Invert the base upside down to use with the turret. There are many discount houses for Lee equipment that have good prices on the equipment.
Thanks!
Do I seat the powder die all the way down to the bullet holder? I just started setting up my Lee turret loader and have been watching your tutorials, But I didn't see how far to seat die.
Each of the Lee sets is different, and have different requirements, also depending on the use of different powder dispensers. Simply follow the instructions in the printed instructions that come with each die and powder dispenser, and you will be good. It's very simple.
Great details for novice or experienced reloaders. You're better than gavintube/ultimate reloader, and he is good. Thanks.
Thank you again, Sir.
Yeah Lee definitely didnt do a great job with the instruction manual. Almost everyone recommends this press as a good beginner press, yet the directions provides little detail on installation steps. Thank you sir.
good, thanks
Pete must be the cameraman.
No need to cam over on your resizing die? I’ve read the instructions manual to give an extra 1/8 to 1/4 turn after it touches the shell holder.
nono559
Those instructions are correct, for those desiring to return their brass to minimum, original factory dimensions. I neglected to explain that most bolt action rifles, for which these were loaded, will shoot more accurately when minimally sized, without camming over. This is one of my oldest loading videos, done when I was limited to time constraints. I produced newer ones. If you engage in loading, first understand what each process is accomplishing. Resizing dies exist for the purpose of fitting a brass case back to your rifle, and when it has accomplished that objective, sizing beyond that point unnecessarily work hardens brass and loosens its fit, thereby reducing accuracy. I suggest testing a sized case in the chamber to determine if that has been accomplished. If the bolt won't close easily, tighten the die more and cam over until it does.
Thanks you. :-)
will lee dyes work in other presses?
+mhrfarms They are the same threads, yes. Just read the enclosed literature that comes with them, as they are different, more accurate, and much easier to use, and require no locking screw that stays tighter, but can be released simply with fingers. I recommend Mr/ Lee's loading manual.
+GunBlue490 thankyou I was just at a gun dealer and he told them the lee dies only work with lee presses but I didn't believe him
+mhrfarms You don't have to know how to cook an omelet to sell eggs, or know about guns to be a licensed gun dealer. ;-)
+GunBlue490 thanks for the quick replies I really enjoy the easy way you present your videos I have another questionFrom the lee website"The free play in the turret is normal. Without it, the turret would not move correctly. Make sure that the die is adjusted to compensate for
the free play" ok that is fine but I noticed a lot of movement up and down and I can see that over time ,the turrets or the machine itself will wear and cause issueswhat is your opinion on thisthanks
Does the uploader still reply to comments?
Nabeel Adams
What's your question, sir?
GunBlue490 thanks man. I received an 28 yr old lee turret press with perfect powder measure (used only once to deprime). It looks similar to yours but im not sure. I have no idea how to set it up. Could i possibly email you pictures and have you take a look a it?
Who the hell is Pete
Jeff Reid
It could be you.
GunBlue490
Hahaha