Sorry for the late response the video got taken down but appealed the video, at the moment only local battle works if you have a second pc or if your friend comes over with a compatible laptop or pc, stay tuned if i find anything i will upload to my channel ;)
Use the button you mapped for the aime card, hold that button when the game prompts you to until something pops up, should let you make a save. Make sure u made an account and put your online ID like in the video :)
@@Game-kz4ec just make sure either you or your friend are connected under the same radmin or hamachi ip, then both start up the game and select local battle, it should find you guys automatically
Hello, this is a great video! Thank you. However, I'm having trouble because every time I start the game, the data disappears. Can you tell me how to create an Aime and how to save the data?
1 question. does your progress save when you exit out and back in. the previous Zero V2 the process doesnt save and you have to start over again but you get to keep the points and car upgrades
Hey thanks for the vid, I was following the old tutorial and couldn’t get the minime to work then saw ur vid and just started with teknoparrot and it all worked out. Just one more thing, I’m using a dd wheel to play and I’m noticing a big dead zone in the middle, I’ve set the angle to 270 already, I saw on some old post they mention about wheel restriction in teknoparrot settings but I couldn’t find it anywhere probably got removed in the newer updates any help plz😢
Hi! im just curious has anyone had a problem with it loading recently? It was working fine last night and now it just sits at the black screen. Its been giving me a "process state setup game mode Error 0"
I know this is a different version but I’ve been trying to search on how to save swap with all progress on version 3. I can’t seem to switch to another car without messing things up.
Thank you so much! Game runs great. One question, I created an account on tekno and entered my id and it came up with an already filled account and save from tekno. Do you know I can make my own fresh account?
@@DanuQAQ13 I never got that error before, I’d just try to reinstall the game, just before you do that to copy your Save Id somewhere on your computer so you wont lose your progress, Im still waiting for v3 to come to pc so once that’s out that will be the new version
Hello, thank you for providing the tutorial. I can now play the game normally, but currently there's no sound. How can I adjust the settings to enable the sound?
I have it up and running, but my steering is non-existant. I've messed with stooze and sensitivity settings. It works fine in 8 with my G920, but for ZeroV2 not so much. Any suggestions?
Hello, I have a strange problem, and that is that when I enter the game and put the AIME card, a game from someone else appears, and I don't know how to remove it, I tried looking for files that have to do with the save, but it didn't work, check My online ID is fine, and neither is the IP, I don't know what else it could be, before I used to play initial D zero 2.11 sega tools, could it have anything to do with it?
Thanks so much for making this tutorial. I have one question. After I downloaded and installed the legacy release for teknoparrot, I can’t find initial d zero and other games all show something like missing megadata”. Does that mean this release is no longer available?
@@amandaip2027 so did a full re install, make sure you have your TeknoParrot fully updated when you launch it, it didn’t appear on my list until i did those updates, and if your updates fail, just keep updating until it goes thru, that was probably just an wifi issue for me but just incase it happens to you, after update tho the game will pop up on the list ;)
I tried to explain it, but error 6503 appears. If I keep pressing the AIME card, the card is not created. What should I do? ERROR 6503 Failed in reading
@@ruined0214 I would use a Nividia Graphics Card, anything RTX 2060 or higher and you will be able to run it at full speed :), if you can upgrade the cpu that would be good too, something like a newer gen i5 or a Ryzen 5 5600x
Bro, you successfully activated your aime card! thank you! I want to create multiple aime card data and play with them, or delete the current data. Please tell me how.
I’m not exactly sure where the aime saves, still trying to find that, but when you map the button to use your aime card, hold the button instead of just pressing it and it will load the aime card
Now that i think about it, if you want to play with multiple aime cards, i think you can make more teknoparrot accs, each new account generates a new Online ID which is used to use the Aime card, which should mean you can change the ID's on Teknoparrot any time you want to use a different save and keep them noted somewhere so you won't forget them.
@@RTR0TEK bro everytime i play the game at midnight it says my aime card didnt read but when i try to play around noon- night around 9 it still work, can u tell me whats the issue?
when I play the game its like inverted when I press gas there is no throttle but when I let go of it automatically throttles its own and yes im using default setings on ds4windows for my controller is there any way to fix this? Thanks
Pour le moment, il ne s'agit pas d'un jeu d'arcade MF Ghost, principalement parce que la série est toujours diffusée, une fois la série entière terminée, ils créeront bientôt un jeu comme MF Ghost. La chose la plus proche que nous ayons maintenant est ce jeu car il contient des voitures de MF Ghost et Initial D the Arcade Season 3, pour lequel j'ai une vidéo en préparation cette semaine ou la semaine prochaine.
Hi there. Tried but, once loaded game and core on windows prompt, it returns an error: Process state: setup game mode Error 0 Process state: Advertise start LAN install - client ANY suggest ??? Ty on advance
@@000DANIELSAN000 make sure that in game settings on tekno that Free Play and EnableDist Server is checked on, your Online ID as well make sure to copy and paste the one from your tekno account to OnlineID, make sure Force Specific Network Adapter is off, and input your ipv4 address into Network Adapter IP from Task Manager by right clicking the task bar and clicking Task Manager, then go to performance and you will find your Ipv4 address at the wifi performance
Another thing: looking your other replies, you say "disable Intel Fix" on Game settings: BUT, i do not see this option on game settings, neither on global settings of Teknoparrot. Where is it? ty
@@zombietkt67 Ouais, mais la saison 3 d'Initial D The Arcade est maintenant sur Teknoparrot et propose une meilleure sélection musicale, cette vidéo sortira bientôt
I have a problem: Process state: setup Game Mode Error 0 Process state: Advertise start LAN install - client. Does anyone know how to solve it?Nobody knows how to solve it?
@@RTR0TEK Same problem here. CPU: i7-12650H GPU: RTX 3060 RAM: 16GB Win 11 What ends up happening is the Serverbox opens and stays stuck on 'not responding'. Though I also have to run it on the bootstrapper version because I don't see an update option in the legacy client, and Zero doesn't even show up in there. Only 8.
@@RTR0TEK Nevermind! Apparently after fully shutting down and starting up my computer (Instead of just restarting) and exiting Riot Vanguard *before* booting up TeknoParrot instead of after, the Legacy version popped up with updates. And now the game works totally fine. Although I'm facing a new issue where the AIME card button doesn't seem to work. Just asks me to register my phone and bounces me to the main menu if I don't, so I can only play without saving. Is that normal?
@@seventh-hydra you should be able to play with the save, have you mapped the button to use the AIME card? Whichever button you chose to map it you hold it when it asks for it until it loads it, usually about 5-7 secs or so
@@RTR0TEK i did everything and now it shows that one of my file is gone due to my antivirus, and i deactivated the defender and extract again, same result...
Do u have force specific network adapter checked, uncheck it and see if that works, that will stop the game from trying to connect to the network, make sure you hold the button you mapped for the aime card too, for me that's how i'm able to bring my save everytime, and double check the IP on Task Manager make sure its the active network adapter with the IPV4 Address
@@krzwa no just the game files is all you need to get the game running, segatools and all that other stuff is not needed because TeknoParrot comes with everything to get the game working, plus that stuff is super outdated. You might need to redownload everything.
@@RTR0TEK ive tried redownloading the game and teknoparrot but unfortunately i still cant connect and use the aime card the game works perfectly fine beyond that though
At the moment only local play if you have a second pc at your home and your friend is over, i will see if there is a way but stay posted i will update with a new video if anything is found !!!!
Hello, I was stuck on the black window that appeared after launching the game in your video. The step of loading the game was stuck for more than five minutes and I could not enter the game. It stayed on the black screen and the blue circle continued to rotate... This is normal. ?, how to solve it?
hey guy if u get error Process state: setup game mode Error 0 Process state:Advertise start LAN install-client i did fix my it no work with intel gpu u need disable intel gpu it gonna work
I put on youtube disable intel gpu they help..but if u dont have nvidia or amd it no gonna work because it make slow game..if u have nvidia or amd u put high perfomance that it gonna work perfect u can look on youtube put change gpu nvidia or amd they show u..sorry im not speak english i hope it work u
From what I see in your video, it’s just a few second download? What about the main game exe file download? I saw in in your description box but after download put it where? Just in my local pc? Or just the standard download folder in my pc?
@@윤호-t6l yeah you have to set the second executable when you select the game in TeknoParrot and click Game Settings, and look for amdaemon when u click second executable
@@윤호-t6l inside of Stage Zero v2 folder you have downloaded inside package folder is where amdaemon is located as well as the first executable which i assume you set that location already
@@amompamomp7252 make sure that in game setting on TeknoParrot that its set to Direct Input, and then you can map your wheel controls on controller settings
@@casstreamer0 Yes it is most similar to Idta. Season 3 is available on TeknoParrot as well, I still need to edit and post that video but been busy because life lol
@@ometele6957 yes it does just map your controller and make sure Xinput is enabled in game settings before launch, default will be DirectInput which is wheel
@@amompamomp7252 yes 100 percent clean scanned on total virus, if you do get a virus notification from windows which never happened for me, its just a false positive, works like a charm for me!!
@@nantesrepublic7763 ? Did u map the button for Aime card, that’s how you save the game, when u launch you hold the aime card button you mapped and it should let you make a card, thats the only way you can load your save
@@JC-op7qe just use the button you mapped for the AIME on your controller or keyboard from controller settings. Hold the button after starting the game and it will let you make a AIME card (save file) you will hold that button everytime you press start after the title screen
@@RTR0TEK after hold AIME button, it tell me to register phone number but error 6503, after that everytime i hold on AIME button error 6503 will show up.i already paste my online id on game settings
Thank you so much! It works! As a show of appreciation, a sub to you :)
Awesome man im glad it worked :)) !!! Thank you very much :))
我也是开不到 显示
Process state: setup game mode
Error 0
Process state: Advectise
start LAN install - client
Thanks to you I was able to play, thank you
how did you managed to put the game on teknoparrot? mine's not showing at all. I even extracted initial d zip file as well. can you help me?
@@michaelmedina9997
How far is the installation progressing?
What you need
node.js
teknopalot
zip with initial d
Hello, thanks for the tutorial, btw do you have an english mod for this version?
I'm not sure if thers's an english patch of this game yet, If i find it i'll update y'all
Thank you!
@@filipinovines My pleasure !!!
awesome thankyou havent found an ffb setting i like ?but other than that it flawless if i keep trying online battle will i ever find one ?
Sorry for the late response the video got taken down but appealed the video,
at the moment only local battle works if you have a second pc or if your friend comes over with a compatible laptop or pc, stay tuned if i find anything i will upload to my channel ;)
How do you fix the aime cards not working? or do you just have to play without saving?
Use the button you mapped for the aime card, hold that button when the game prompts you to until something pops up, should let you make a save. Make sure u made an account and put your online ID like in the video :)
Sorry can i ask a question pls? how long need to wait for the loading on black after i pressed launch the game from the TeknoParrot apps😅
Takes about 2-4 mins depending on pc specs, if you see a hint of blue you should be fine no worries just let the game launch ;)
@@RTR0TEK Alright, it was working on my pc. TQ for sharing 👊 bro
Great Tutorial!, btw do you know how to play 2 player in this? using vpn like hamachi or radmin.
@@Game-kz4ec just make sure either you or your friend are connected under the same radmin or hamachi ip, then both start up the game and select local battle, it should find you guys automatically
hi. i always get the 8114 error after launching the game. i think it's an error for the network connection. what should i do?
The game is not appearing on the menu and there's no option for me to put the directory folders. I have the Teknoparrot and the main game downloaded.
Add the Game to tour library first, than, go to game settings and select both exes
@modz thanks!
@@RTR0TEK It says "Aime cannot be used for Online Battle mode this time". can I play this online?
Hello, this is a great video! Thank you. However, I'm having trouble because every time I start the game, the data disappears. Can you tell me how to create an Aime and how to save the data?
1 question. does your progress save when you exit out and back in. the previous Zero V2 the process doesnt save and you have to start over again but you get to keep the points and car upgrades
Yes, you have to map a button for the AIME Card which is used for your save
Hey thanks for the vid, I was following the old tutorial and couldn’t get the minime to work then saw ur vid and just started with teknoparrot and it all worked out. Just one more thing, I’m using a dd wheel to play and I’m noticing a big dead zone in the middle, I’ve set the angle to 270 already, I saw on some old post they mention about wheel restriction in teknoparrot settings but I couldn’t find it anywhere probably got removed in the newer updates any help plz😢
Hi you can't do anything about the deadzone since it also exists on the real arcade cabinets!
Hello everybody i got the game running super well the next day i cant play the came it says error 0800 unknown error whats should I do???
Hi! im just curious has anyone had a problem with it loading recently? It was working fine last night and now it just sits at the black screen. Its been giving me a "process state setup game mode Error 0"
Make sure your TeknoParrot is updated if there is any updates available on the app, then restart your pc
@@RTR0TEK I've tried everything from Redownloading Tekno to redownloading the rom, im just curious if yours is running fine still
@@RTR0TEK same here it was working fine yesterday was playing IDZ 1.3 and IDZ 2.30 but after teknoparrot update I'm having the same issue as you.
Same
@@DoubleAGamer yeah mine is still running perfectly since day one, you pc might not be able to run the game but I could be wrong
I know this is a different version but I’ve been trying to search on how to save swap with all progress on version 3. I can’t seem to switch to another car without messing things up.
Thank you so much! Game runs great. One question, I created an account on tekno and entered my id and it came up with an already filled account and save from tekno. Do you know I can make my own fresh account?
That’s weird, i made my acc and was given a fresh ID, i would try making a new one again, it might work but give it a shot
@@RTR0TEK thanks I’ll give it a try
how to fix error "unsupported crc, please use a supported version of game." even though I've been using the same version of iDAS Zero v.2
@@DanuQAQ13 I never got that error before, I’d just try to reinstall the game, just before you do that to copy your Save Id somewhere on your computer so you wont lose your progress, Im still waiting for v3 to come to pc so once that’s out that will be the new version
Hello, thank you for providing the tutorial. I can now play the game normally, but currently there's no sound. How can I adjust the settings to enable the sound?
@@bon290017 make sure the resolution is the same as your monitor screen in gane settings before you launch it, and are you using a controller?
I have it up and running, but my steering is non-existant. I've messed with stooze and sensitivity settings. It works fine in 8 with my G920, but for ZeroV2 not so much. Any suggestions?
Have you switched your Input to Direct Input instead of XInput in Game settings?
Hello, I have a strange problem, and that is that when I enter the game and put the AIME card, a game from someone else appears, and I don't know how to remove it, I tried looking for files that have to do with the save, but it didn't work, check My online ID is fine, and neither is the IP, I don't know what else it could be, before I used to play initial D zero 2.11 sega tools, could it have anything to do with it?
Thanks so much for making this tutorial. I have one question. After I downloaded and installed the legacy release for teknoparrot, I can’t find initial d zero and other games all show something like missing megadata”. Does that mean this release is no longer available?
@@amandaip2027 so did a full re install, make sure you have your TeknoParrot fully updated when you launch it, it didn’t appear on my list until i did those updates, and if your updates fail, just keep updating until it goes thru, that was probably just an wifi issue for me but just incase it happens to you, after update tho the game will pop up on the list ;)
@@amandaip2027 click on the 3 lines on the too right corner when you launch and click install updates
Excuse me Start the game (Error 4) ？？
Failed to Load DLL! (Error 4) I got this error
i tried this on my steam deck it doest work i cant get past the error screen of initial d arcade stage zero
@@SelenaTeamGomez not supported for steam deck
I tried to explain it, but error 6503 appears. If I keep pressing the AIME card, the card is not created. What should I do?
ERROR 6503 Failed in reading
Did you make a TeknoParrot acc and get your own Online ID for the game, and paste it into the game settings in TeknoParrot
After obtaining my ADI according to the four instructions, the meat eating table 6503 Meg appears in the settings and an event appears.@@RTR0TEK
@@RTR0TEK i have created and still can't for save my data in TeknoParrot account.
I am having a desktop with Intel i5 3rd gen, can I add a Graphic card to support the game? What type of graphics card you would recommend? Thank you.
@@ruined0214 I would use a Nividia Graphics Card, anything RTX 2060 or higher and you will be able to run it at full speed :), if you can upgrade the cpu that would be good too, something like a newer gen i5 or a Ryzen 5 5600x
Thank you for the recommendation ❤
@@ruined0214 of course, anytime ;)
i could online for the 1st time logging into the game but not the 2nd time. it will not have connection somehow, how do i fix this issue?
i think there are specific time when the server of the aime card open and close
Bro, you successfully activated your aime card! thank you!
I want to create multiple aime card data and play with them, or delete the current data. Please tell me how.
I’m not exactly sure where the aime saves, still trying to find that, but when you map the button to use your aime card, hold the button instead of just pressing it and it will load the aime card
Now that i think about it, if you want to play with multiple aime cards, i think you can make more teknoparrot accs, each new account generates a new Online ID which is used to use the Aime card, which should mean you can change the ID's on Teknoparrot any time you want to use a different save and keep them noted somewhere so you won't forget them.
@@RTR0TEK bro everytime i play the game at midnight it says my aime card didnt read but when i try to play around noon- night around 9 it still work, can u tell me whats the issue?
Any idea what to do
Process state: setup game mode
Error 4104
Process state: Advertise
Start LAN install - client.
Disable intel fix in game settings on TeknoParrot when you select the game
@@RTR0TEK I don't see that option
@@frogking8938 did u solve the problem, i also cannot find the disable intel fix option
works great, how do I map the control to keyboard or game controller? I went to controller setting but I cant input anything
Make sure in the game settings that direct input is set to XInput for the controller to work, it should let you map it afterwards
@@RTR0TEK will this work with xbox controller? I tried the backbone controller and I cannot map anything
when I play the game its like inverted when I press gas there is no throttle but when I let go of it automatically throttles its own
and yes im using default setings on ds4windows for my controller is there any way to fix this? Thanks
You might need to tweak your ds4windows settings, i play on the same controller so it should work fine, what ever is inverted do the opposite of it
There are settings in TeknoParrot to change input to inverted
Hello, I'm laying it down and playing well, but the speed is too slow, it's 150 km, how do I change the speed?
It's just like that
@@Bigtingg HEY, THIS IS TOO SLOW, IT'S IMPOSSIBLE TO HIT 160 KM AND TIME ATTACK
tu a des info sur une version mf ghost ?
Pour le moment, il ne s'agit pas d'un jeu d'arcade MF Ghost, principalement parce que la série est toujours diffusée, une fois la série entière terminée, ils créeront bientôt un jeu comme MF Ghost. La chose la plus proche que nous ayons maintenant est ce jeu car il contient des voitures de MF Ghost et Initial D the Arcade Season 3, pour lequel j'ai une vidéo en préparation cette semaine ou la semaine prochaine.
Hi there. Tried but, once loaded game and core on windows prompt, it returns an error: Process state: setup game mode
Error 0
Process state: Advertise
start LAN install - client
ANY suggest ???
Ty on advance
@@000DANIELSAN000 Is your TeknoParrot updated? And if yes did you link the exe files on TeknoParrot to launch the game
@@RTR0TEK yes, newly installed, 2 exe files linked correctly
@@000DANIELSAN000 make sure that in game settings on tekno that Free Play and EnableDist Server is checked on, your Online ID as well make sure to copy and paste the one from your tekno account to OnlineID, make sure Force Specific Network Adapter is off, and input your ipv4 address into Network Adapter IP from Task Manager by right clicking the task bar and clicking Task Manager, then go to performance and you will find your Ipv4 address at the wifi performance
@@RTR0TEK ok i will try, ty
Another thing: looking your other replies, you say "disable Intel Fix" on Game settings: BUT, i do not see this option on game settings, neither on global settings of Teknoparrot. Where is it? ty
ya des autres musique dans le jeux a part les 10 proposer au début ?
@@zombietkt67 Non, malheureusement, c'est la seule musique du jeu et elle ne peut pas être modifiée.
@ ah mince
@@zombietkt67 Ouais, mais la saison 3 d'Initial D The Arcade est maintenant sur Teknoparrot et propose une meilleure sélection musicale, cette vidéo sortira bientôt
@ au pire UA-cam pour les musiques en fond ça marche aussi 😂
@@zombietkt67 C'est vrai, la musique UA-cam en arrière-plan est également une meilleure option 💯💯
how to fix the lag in the game?
Brother, can you still connect now? I followed your method and connected but now there is no network.
Try to re install the game, also if it doesn’t work what is your system specs?
Just now I connected to the server again. I am in China. I may need to change to a better proxy.@@RTR0TEK
@@RTR0TEKDo i need lan cable to make it connect?
@@Azthelus no wireless works fine I’m not using a lan cable but you can if you want to
Hi, I have a Logitech G923 (I think?) How do I map the controller to TeknoParrot?
Make sure you have it set to Direct Input instead of XInput on Game Settings to be able to map the controls with your Logitech steering wheel
@@RTR0TEK thanks
I have error 8008 I'm cooked😭
I have a problem:
Process state: setup Game Mode
Error 0
Process state: Advertise
start LAN install - client.
Does anyone know how to solve it?Nobody knows how to solve it?
Whats ur specs
@@RTR0TEK
CPU: Intel Core i5-13400
GPU: RTX 4050
RAM: 16GB
Win11
@@RTR0TEK Same problem here.
CPU: i7-12650H
GPU: RTX 3060
RAM: 16GB
Win 11
What ends up happening is the Serverbox opens and stays stuck on 'not responding'. Though I also have to run it on the bootstrapper version because I don't see an update option in the legacy client, and Zero doesn't even show up in there. Only 8.
@@RTR0TEK Nevermind! Apparently after fully shutting down and starting up my computer (Instead of just restarting) and exiting Riot Vanguard *before* booting up TeknoParrot instead of after, the Legacy version popped up with updates.
And now the game works totally fine. Although I'm facing a new issue where the AIME card button doesn't seem to work. Just asks me to register my phone and bounces me to the main menu if I don't, so I can only play without saving. Is that normal?
@@seventh-hydra you should be able to play with the save, have you mapped the button to use the AIME card? Whichever button you chose to map it you hold it when it asks for it until it loads it, usually about 5-7 secs or so
bro, i have an issue with the controller setup, when i press which key i want to change after i pressed it, nothing happen..
and i get an error like unsupported crc
@@williamyap7945 what controller is it
@@RTR0TEK its a original ps4 controller, but even my i pressed on my keyboard its nothing happen too
@@williamyap7945 do you have ds4windows? And did you change DirectInput to XInput in Game Settings in TeknoParrot?
@@RTR0TEK i did everything and now it shows that one of my file is gone due to my antivirus, and i deactivated the defender and extract again, same result...
im failing to connect to the network and it wont scan the aime card. ive already placed my ip as well
Do u have force specific network adapter checked, uncheck it and see if that works, that will stop the game from trying to connect to the network, make sure you hold the button you mapped for the aime card too, for me that's how i'm able to bring my save everytime, and double check the IP on Task Manager make sure its the active network adapter with the IPV4 Address
@@RTR0TEK yeah ive done that and nothing works
is there anything else i need to download beforehand?
@@krzwa no just the game files is all you need to get the game running, segatools and all that other stuff is not needed because TeknoParrot comes with everything to get the game working, plus that stuff is super outdated. You might need to redownload everything.
@@RTR0TEK ive tried redownloading both the game and teknoparrot but unfortunately nothing has worked
@@RTR0TEK ive tried redownloading the game and teknoparrot but unfortunately i still cant connect and use the aime card
the game works perfectly fine beyond that though
bro or sis,
first thanks for that could yiu please put initial d 4 till 7 folder so we can downl9ad please
regards a initial d fan
@@woklam342 I will find those and link them soon ;)
can you play multiplayer against friends?
At the moment only local play if you have a second pc at your home and your friend is over, i will see if there is a way but stay posted i will update with a new video if anything is found !!!!
@@RTR0TEK what if you connect together through something like hamachi
@@PuppyPlimby That could be possible but ofc would require some experimental work, I wanna give that a try very soon !!
O: drive?!! how many drives have you got 😅😂
@@SB-tp3yw i have like 8 drives 🤣
The gameplay for is really slow and I don’t know why. Do you have a solution?
What specs are u running ?
@@RTR0TEK so my gaming pc has an i9-11900k processor
4080 RTX Nvidia GeForce
@@mariovazquez1088 I have a Amd Ryzen 7 Cpu and RTX 3080 12GB , i believe intel cpu or gpu is incompatible
Hello, I was stuck on the black window that appeared after launching the game in your video. The step of loading the game was stuck for more than five minutes and I could not enter the game. It stayed on the black screen and the blue circle continued to rotate... This is normal. ?, how to solve it?
@@Sevenqoo7777 what are your pc specs?
Do you have the link for stage 8?
@@motionssensed I don’t have it, but internet archive should have it
What should I do if an error occurs when I create a card?
@@johnson-hp4hc make sure you pasted your online ID from TeknoParrot website in game settings then try again
@@RTR0TEK HOW can i get id from TeknoParrot?
How to use keyboard as controller
hey guy if u get error Process state: setup game mode
Error 0
Process state:Advertise
start LAN install-client
i did fix my it no work with intel gpu u need disable intel gpu it gonna work
Yes that is the correct fix 📈
How do u disable that??
@@user-sb6ku6zr7r its in the game settings in TeknoParrot
I put on youtube disable intel gpu they help..but if u dont have nvidia or amd it no gonna work because it make slow game..if u have nvidia or amd u put high perfomance that it gonna work perfect u can look on youtube put change gpu nvidia or amd they show u..sorry im not speak english i hope it work u
From what I see in your video, it’s just a few second download? What about the main game exe file download? I saw in in your description box but after download put it where? Just in my local pc? Or just the standard download folder in my pc?
The file you download you can extract the contents of it wherever you want on the computer, in your preferred folder to keep organized
can this be played in online multiplayer
Unfortunately not yet, only aith hamachi with friends at the moment
Where can I download the secnod game(amdaemon) ?
@@윤호-t6l its in the stage zero file in the description all executables needed to run the game are in there
The error says, "The second game location is not set! Please set it in the game settings."
@@윤호-t6l yeah you have to set the second executable when you select the game in TeknoParrot and click Game Settings, and look for amdaemon when u click second executable
@@RTR0TEK Where can I download amdemon?
@@윤호-t6l inside of Stage Zero v2 folder you have downloaded inside package folder is where amdaemon is located as well as the first executable which i assume you set that location already
Is that safe or not ? Because I heard before about this method have a Trojans or ransomware
Have been using it for a while now, it should be safe i haven’t had any problems whatsoever 💯
@@RTR0TEK thanks and please I have more question can I connect g29 or not if I can how ?
@@amompamomp7252 make sure that in game setting on TeknoParrot that its set to Direct Input, and then you can map your wheel controls on controller settings
@@RTR0TEK thank you very much
Where do you get the games?
@@kelvinputranto usually a quick google search can get you what you want to find, i already left a link for this game in the desc
is this most similar to idta?
@@casstreamer0 Yes it is most similar to Idta. Season 3 is available on TeknoParrot as well, I still need to edit and post that video but been busy because life lol
@@RTR0TEK Thanks bro
I'm waiting for your idta tutorial video
whats the amfs folder for
Its for the data of the game
@@RTR0TEK where do I put the folder
is it work with gamepad?
@@ometele6957 yes it does just map your controller and make sure Xinput is enabled in game settings before launch, default will be DirectInput which is wheel
How do i make a card?
@@sxiong13 using the button mapped to use the Aime Card, you must hold it for about 5 secs and it should let you make a card
Start LAN Install -Client
how to fix this?
Now it worked for you ? How to fix this
I have the same problem. Nobody knows how to solve it?
@@МикаилНовиков-ж4ч same problem
i did fix my it no work with intel gpu u need disable intel gpu it gonna work
Is this Zero Ver.2.3?
@@iceboy1053 yes it is
Is it safe and clean from viruses?
@@amompamomp7252 yes 100 percent clean scanned on total virus, if you do get a virus notification from windows which never happened for me, its just a false positive, works like a charm for me!!
@@RTR0TEK thanks you helped me a lot
@@amompamomp7252 of course, its what i do ;), let me know if anything occurs
It says Unsupported CRC
Could you please help me @RTR0TEK
세이브가 됩니다 감사합니다 ~😊
혹시 카드 어떻게 만드셧는지요?
請問能用修改器修改金錢嗎
目前沒有，但如果有的話我會想辦法，也許嘗試作弊引擎👀，它可能可以編輯他的值
Sorry my Chinese is a little bit bad but im learning 😂
@@RTR0TEK 好的 我試試看作弊引擎 正想嘗試看看作弊引擎☺️
我很高興它能工作:)，我現在也在玩🙏🏽
按照你的用法 我無法開啟遊戲 是有哪裡做錯了嗎?
確保強制網路介面卡未選中，對於網路介面卡 IP，請確保輸入 IPV4 位址，您可以透過右鍵點擊工作列，然後按一下工作管理員在 Windows 電腦上的工作管理員中找到它。 在其中轉到“效能”並滾動，直到找到活動的網路適配器（無論是 WiFi 還是乙太網路），然後您將找到正確運行遊戲所需的網路 IPV4 位址。 並根據您的需求設定控件，如果在控制器上使用 XInput，如果在帶有變速桿的方向盤上使用直接輸入。 如果您需要更多幫助，請告訴我！
@@RTR0TEK 顯示 start install - client
要怎麼教學呢?
well data not saved
@@nantesrepublic7763 ? Did u map the button for Aime card, that’s how you save the game, when u launch you hold the aime card button you mapped and it should let you make a card, thats the only way you can load your save
link download
Check description for download!
thank you ~~~
can i save the data? or everytime need to replay?
@@JC-op7qe just use the button you mapped for the AIME on your controller or keyboard from controller settings. Hold the button after starting the game and it will let you make a AIME card (save file) you will hold that button everytime you press start after the title screen
@@RTR0TEK i get this error after start the game
Process state: setup Game Mode
Error 0
Process state: Advertise
start LAN install - client.
@@RTR0TEK thank you so much
for those who want to solve the problem, windows key then nvdia control panel, and select the program and set it to nvdia gpu then the game works fine
@@RTR0TEK after hold AIME button, it tell me to register phone number but error 6503, after that everytime i hold on AIME button error 6503 will show up.i already paste my online id on game settings
on9