Hem Suit Jacket Sleeves Like A Pro! (Updated Method!) (Ep. 47)
Вставка
- Опубліковано 30 чер 2024
- In this EPIC Hollywood remake of one of our most popular videos, I goes into excruciating detail to teach you how to shorten the sleeves of a suit jacket. This video is BIG and chock full of practical, step-by-step advice for learning how to perform what can be a daunting task, but don't worry- YOU CAN DO THIS!
If you enjoy these kinds of long form videos, do us a favor and leave us a comment saying so! It takes a ton of time and effort to create these free sewing tutorials, and every interaction and minute you spend with us means the world! THANK YOU for your support, and we'll see you next week with another video!
Shoot us your questions and let us know what else you want to see by commenting below!
Tailor's Top Picks for Tools: amzn.to/3MTgbwm
Tailor's Top Picks for Sewing Machines: amzn.to/3rrX7yO
Learning to sew or brushing up on new techniques? Check out more sewing videos here:
• THE SEW SHOW
Looking for help on machine troubleshooting? Take a look at our machine use videos here:
• Sewing Machinery Tutor...
Want more expert advice on all things sewing? Check out more 'How To' articles here: www.wikihow.com/Author/Shaely...
Thanks for watching and subscribe for new sewing videos! #behindtheseams #thesewshow
00:00:00 Introduction
00:00:48 Measure New Sleeve Length
00:02:37 Seam Rip Sleeve Opening
00:09:59 Marking Out New Sleeve Length
00:13:46 Recap on Measuring and Marking
00:14:48 How Does Suit Sizing Work?
00:16:56 Cutting New Sleeve Length
00:18:17 Remove Faux (Fake) Buttonholes
00:23:38 Pin Placket - Under Side
00:26:59 Pin Placket - Mitered Side
00:30:19 PEP TALK
00:30:41 Sew Newly Shortened Placket
00:33:11 How To Flip The Placket Edges Right Sides Out
00:34:33 Pressing New Placket and Sleeve Length
00:37:19 Mark and Cut the Lining
00:39:42 Open Lining and Pin to Outer Sleeve
00:45:29 Reattach Lining to Outer Sleeve
00:49:25 Press Fully Shortened Sleeve
00:52:09 Shout out to Harris Tweed!
00:52:27 Closing the Lining Opening Over the Placket
00:55:56 Tack the Underarm seam to the Seam Allowance
01:00:34 Reattaching the Faux Button Placket
01:11:10 Final Reveal - Навчання та стиль
absolutely on of the best tutorials I viewed. Slow, reasonable pace, repeat of complex steps for understanding, no distracting background music, pleasant voice, use of humor....I can't wait to
complete shortening of two jackets for my husband...not as scared about damaging very expensive
suits. Thank you!
My grandson purchased a suit at a garage sale. The jacket needed to be taken in around the waist,the sleeves were to long,and the waist on the pants was 2 inches to big!!! I am a very average sewer and have not ever altered anything. I told him I would try and his response was, "Grandma I know you can do it." Your video made it possible. I can't thank you enough. You are very blessed to be able to teach even a novice like me. It turned out beautiful and I can't wait to show it to him.
As I do about 10 sets of sleeves every week I have a couple of tips. When you’re stitching the lining back in, if you place the garment down and the lining up, you can start at your last pin you put in at the placket. And I always replace my buttons before I reattach the lining.
10 sets of sleeves 😂😂😂😂😂
Thank you so much for the clear and detailed instructions, have now succeeded in shortening my jacket sleeves and an very pleased with the result. I did have a moment of placket panic 😂
THANK YOU! My fiancé bought a new suit for a wedding we’re going to this week. But they’re a short king and bought an R size. I hemmed the pants but told them to get the sleeves done at a tailor. Well, with all the other preparations, they forgot. And we leave tomorrow night after work. So I desperately googled a tutorial to see if I could even attempt it, and I found you and you told me I could do it. So I did. Your tutorial was incredible. I laughed, I cried, I swore a lot. Is it perfect? Absolutely not. But the sleeves are the right length, I am now fiancée of the year, and I feel so accomplished!!
If you’d told 11-year-old me at my last sewing lesson that in 20 years I’d successfully hem up a suit, I would’ve been skeptical. But look at me now!
‘I laughed, I cried, I swore a lot’ … you’d fit in really well around here 😉
THANK YOU - I watched a dozen videos like this, and no one gave that much detail. I was all jammed up in sewing a sleeve inside out through the hole, and you GUIDED me.
This is the best, most clear, concise tutorial out there!!
I can’t thank you enough. I got beautiful results. I’ve sewn professionally my whole life and never completely understood this process. I feel like a rock star!!!!
Thanks Shae for a great tutorial which made it so easy for me to follow. I had a suit jacket that my brother wanted the sleeves shorten and after looking at a few other tutorials I landed on yours. I was terrified to cut into his jacket for fear of ruining it as I have never altered lined sleeves before. Almost 12 months later after taking his jacket home (he was in no rush to get it back) I finally faced my fear and pulled out the jacket and had your video up. It was so easy with your instructions as I could see everything you did and you repeated steps as well. I did this on the Friday 7th June 2024 and handed the jacket over on the next day Saturday 8th June. Perfect length! Very happy with the results and no longer scared to tackle this type of alteration😊❤
By far the best video on UA-cam for shortening sleeves on a suit jacket. I've watched them all and was confused with the lining top stitch removal and reversal and innie-outie maneuvering... until I watched yours! Great stuff, thank you so much.
The innie outie maneuver has always been the hardest part! I’m so glad I get to share it now!!
Absolutely one sleeve at a time! And one leg at a time! Love your videos!
I love your tip for measuring from the arm pit. Insures you don’t shorten the same side twice.
Thank you again for another invaluable video. These long step-by-step videos are fantastic for really learning an alteration properly. I especially love the tailoring ones where there are a lot of individual steps, I hope you do more of these (my own top request: sleeve pitch alteration, there isn’t anything out there on this). And I love the way you explain why you’re doing things the way you are, that’s really helpful. Thank you, looking forward to the next one!
I found your video just in time - I have a set of sleeves to shorten and I've never done this before. Great video - very detailed and lots of tips! Really enjoyed watching! Thank you.
@ 29 mins is the most difficult part that I was struggling with.... you made so simple to understand and follow
Love the mitre to get the corners bang on instead of just folding them back❤. Really enjoy your enthusiasm for sewing as its given me a renewed love for sewing. X
1:12:23 THANK YOU! This was my first time shortening a suit jacket sleeve. I couldn't have done it without you! ❤
I wish I could “like” this video twice because I’ve watched it at least 18 times.
This was an awesome video and answered a lot of questions I had about modifying sleeves that I'd never learned when I was taught to sew 😅. Great presentation. Thanks so much!
Wow! the best teacher ever, you made it so to understand, definitely i must get it right, I've watched them all you're the best, keep up the good work, God bless
Great video, love the long format❤👍
You are a fabulous teacher! Thank you ❤
Very easy to follow! Thank You!
You are incredible. These teachings are indeed helpful❤
I recently shortened the sleeves on four tuxedo jackets following your previous UA-cam video. Your instructions were excellent and the sleeves came out great. Watching now to see how you’ve added more detail. Thank you for your great instructions! I appreciate how thoroughly you explained the miter, and following the previous foldline to stitch the vertical placket seams.
Wow I really do love your channel. Now I can put the sleeves back how they can.Thank you Thank you❤
That sleeve is a work of art! You inspire me to get my “new” jacket (which I bought two years ago but haven’t worn because the sleeves are too long) out of the back of the closet and shortening the sleeves. Both of them. Thank you!
TY! I was guessing and your video really helped me to resolve just the last part where i need to pull through for a seamless look. I've had no formal training and thank you so very very much!
Wow, I never thought I'd be able to do it. But I did! And thanks to you! ♥Thanks so much for your videos, I love them! 🥰
Thank you so much! This is the best tutorial I have seen on how to shorten a sleeve.
Yes it is the best instructional video so help full
Great Video, the best I have seen on that subject. Your clear explanation and lovely spirit(!) make the challenge achievable ! Thanks you!
Fantastic video. I love the way you describe everything and show it. I could follow along and did a jacket while watching. Thank you so much.
Omg! I'm With you so far, I think. My son wants me to turn up his jacket sleeves. Now I'm terrified 😨 lol. Only just started out again sewing after about 26 years of nothing! Brand New machine 😮 . Oh my, I hope I don't ruin the jacket. But as you said, "you can do it" you are a very good teacher 👏 many thanks for the video 😊
You CAN do!!
Thank you for the best detailed and wonderful instruction i have seen for doing this !!!
Great video! You're such a great narrator with the perfect level of detail.
Excellent video well explained and the camera work was excellent, very well done! I feel like I can do it now! I watched other videos but none explained it as well as this one! Thank you!
I am a new tailor. I love to watch your videos. Thank you for the fantastic work.
Just found this channel! Love it! Great teacher!
Oh how I love you for this! I Taylor jackets and clothes but you have helped me so much and made this job so much easier for me thank you so much for this I will watch you and re-watch you
Hi. What an awesome video, and I agree with others that state they love how detailed your instructions are. I have been sewing for over 25 years and do alterations on the side. My customers have always been women, and I sew and alter from jeans to wedding gowns. I was extremely hesitant when I was approached by one of the young men in my church to shorten some sleeves on his lined suit jackets. I tried one and it turned out the right length but such a puckered look due to the lining. I have sat here today and watched and then re-watched your video, and was able to take apart the "mess" I made and correct it, even with the mitered look. All I can say is WOW!!! Now if I could just learn how to attach a picture of my work for you, I would share the finish look. 😃 Thank you again for your videos.
Shae, this video was amazing! I had to perform this job just this past week and I went to your channel and one other for a tutorial. I appreciate your very detailed tutorial. I also just love your excitement about the alterations in general. I love doing alterations! If I lived in Tulsa, I would definitely visit your beautiful shop and even try to work there. Thank you. The coat sleeves that I had to shorten came out great. Even though I understand why you sewed the sleeve buttons on last after the lining was sewed together, I think the next jacket I work on, I will sew the buttons back on before I close up the lining. I can tell that step is just a preference thing. Anyway, love your channel and what you are bringing to this space!
A lot depends on the available room you have within the new hem space. If you sew them on first you might find it difficult to sew the lining on. You may be able to sew the top two buttons but not the lower two.
Ma’am thank you SO much. I’m a beginner and have been watching videos on this subject, none compare to this tutorial. Super in depth I appreciate it thank you
Loved it
Yes sew buttons on before the lining! Always!!
But good video ❤
But now almost 30K people are sewing them after the fact.
wonderful video
YOU ARE AWESOME
Thank you for making this video. I used it as a co-working call and I sewed along with you 😊
But my jacket had working button holes. I had to improvise. Would love to see this video with the button hole issue.
Thank you..n after this i dont need my tailor anymore coz he doing wrong all the way..i will diy my blazer now..
Wonderful tutorial!
Questions-
Is your iron special coated? I always use a press cloth so my fabric doesn't get shiny.
Is there a way to put the faux button holes back on the sleeve placket like the original sleeve?
Thank you!!!
So fun to watch competent skill. Beautiful work. Is this your business? Thank you again sooooo much. You are fun to watch. I hope you are appreciated to the max🙏🏻❤️. Patty Harp
Learned from your video tutorial how to do it! My customer loves the result! Could you please make a video on how to close down the functional button holes🙏🏻. Thank you!
Yes! That one should be coming up this year and is quite different, as you know, from this procedure, so it is long overdue!
10 thumbs up 👍 Thank you 🙏
Folks, we've clicked onto a bonafide NBT = natural born teacher. Lol...As someone who's taught several young people to sew, I knew fairly quickly into this tutorial that I was in the presence of a instructional MASTER!
(Many, many thanks, m'dear!)
This is very very sweet of you, thank you for the kind words 😍
Loved the video, great tips, do you have a video for a sleeve with a cuff
Thank you! What kind of cuff video are you looking for?? We can add it to the list!
This video was fantastic! Do you also have one that shows how to shorten the sleeves where there are functioning button holes (cut open)?
Definitely on the list for this year!!
Great video - thank you! Do you ever replace the faux buttonholes, or extend the placket so the the opening is a similar length to the original? I am trying to decide whether to shorten my jacket at the end of the sleeves or at the top of the sleeves, the latter of which would maintain the original placket etc.
Great question; you’ll find once you open the sleeve jacket that the area around the top of the placket has been cut into the fabric like vent so often extending it actually is impossible because the fabric just isn’t there. Take a look and you’ll see what I mean! Unfortunately, that means past a certain point you’re just going to lose the placket. Every once in a while, I will go to the underarm seam and heavily taper, which will allow me to shift all of that seam allowance to the outseam of the sleeve and then re-create the placket, but it’s a long and tedious process.
17:38 yes! on scissor sharpening please!
Amazing video, I was able to do it, thanks to you, could you tell us how much could I charge for this service, please ?
Interfacing link! Great video, always fun to watch but I want to buy that interfacing so I can have some on hand for my tailor lol!
Great news, we just posted a video on interfacing and the link for the fusible is in the caption: Best 6 Interfacings and How To Use Them
ua-cam.com/video/l7MmLOk2R5A/v-deo.html
I did love your class but mine ended up showing a weird open seam on the mitered side I could not see what I missed except. Mine had a curved edge
These videos are my absolute favorites!! Being able to see others work the process is so valuable. Also, so many things to glean. Thanks friend
PS What brand of arm board is that?
We’re do you get your button hole garage from
Why did you not do the button whole seams.
The video title should be "Jacket Sleeve Hemming Bible"
Question if anyone can answer. So the sleeve allowance and the lining. The sleeves allowance is folded over however the lining isn’t, we just cut the exact measurements that was cut from sleeve. Why do we not fold over lining or cut excess from lining bc every time I sew them together the lining is showing underneath sleeve when worn.
This is a great question that has a couple of answers; first, we are assuming that the proportions of the sleeve were cut correctly when they were manufactured, meaning that we want to remove the exact same amount from the outer and the inner, which leaves the correct amount of self facing on the inside of the lining when completed. Second, I find that the manufacturers often leave too much lining or more than I actually prefer so if you’d feel more comfortable cutting an extra half an inch off of the lining you can arbitrarily do that, and actually, I often do. Last you can tack the sleeve in more places than I have shown ( such as along the bicep) and use fusible sewn to the self facing internally to keep the sleeve lining from falling out the bottom and help the self facing stay in place along the cuff. This is just my opinion, but I believe that they leave too much lining because the lining often has much less stretch than the outer chosen fabric so they’re wanting to give you more range of movement by leaving more length and volume inside the sleeve.
@@sewshowwithshaethank you so much!! Exactly what I was looking for ❤ your video made it sew easy for me!! I’ve avoided blazers for years but now my confidence is building thanks to you!
Can the suit sleeves be lenghtened again with the scraps you cut off? Or is the shortening permanent?
Yes and no; I find that I can often lengthen them about an inch if I need to, but the only thing that will get in your way is the mitered edge. If the fabric inside of the diagonal mitered edge is trimmed, that will restrict how far down you can let the placket before it starts to curve in a weird way.
Can you put pecans on this and how much pecans looks delicious thank you
Your videos are all about mens jackets is it the same for women's jackets?
If you're asking that; you shouldn't be attempting anything at this level yet. Start with basics. The answer is yes.
What about the fake button holes??
How much would you charge for all that work?
Yea, I see that you are really a professional taylor, recently I have 2 suits one after another from men’s warehouse and they did not do it right and unprofessional alterations. What happened Taylor cut the fabric on the sleeve split where the stitches ended. So they have to replaced the new jacket then I have to do it by myself instead. I just picked another suite and have them to short the sleeves again, you know what happened again, the sleeves were not straight the way should be. So I have to fixed it again. I really don’t know why the men’s warehouse hired unprofessional Taylor’s to do the sloppy jobs. The men’s warehouse needs to know much better about their Taylor’s before they hired them. I really disappointed of their taylors from two locations, but I will not named those two locations at this moment.
Instead of opening the sleeve lining and pulling out the sleeve and machine sewing it, just sew the lining by hand with a slip stitch. It's actually faster, easier, just as professional, and you won't need a glass of wine and ibuprofen afterward, well, not that there's anything wrong with that.😁🍷
God I hope I dont F up my sportcoat.
Constant yackety-yack is an ear-sore.
Good thing that’s where all the best info comes from!
Tailoring should be unnoticeable - as if untouched. Your sleeve method completely destroys the floating lining. The lining did not have the buttons sewn through when it left the factory. Quality Tailoring is like surgery and some doctors, leave horrible scars. An extremely skilled tailor's work appears barely there, unnoticeable - UNTOUCHED. My husband is a vendor for Gucci, one coat $3,500-$5,500+. At that level, the customers notice every stitch, every line and you've just instructed to completely sew through the lining. OUCH! Houston, we have a problem!
Please, sew the buttons BEFORE taking back the lining...... to leave a clean floating lining underneath. You don't know, what you don't know. Scars are nothing, at almost 30K views, that's pure cancer.😭
So after watching over an hour long video (thanks for the view!) it sounds like the only thing you think I screwed up was sewing the buttons back on at the end? I’d be happy to change my ways if you let Gucci know I’m also available 😉
@@sewshowwithshae I'm sorry, if I sounded harsh. Alternative techniques is one of the reasons we find it challenging to bring on new people. We have no idea what THEIR method will be.
My husband is Saville Row trained and believes there are many way to do things but only one RIGHT way. In London, they are pretty paticular without much room for innovativeness. I always say, would'nt it be easier...and his reponse is...sure but, not if it leaves it unoriginal. Again, I apoligize for the harshness. I did not give you credit for all else, which you did well!
Can anyone help me? I’m 5’3 so I have to cut way above the placket.. so I’m left with a cuff without a placket. Is there a way to add another placket or do I just sew buttons onto the placketless cuff?? Any info is helpful-thank you
This is an interesting conundrum that we definitely run into. You can just finish the sleeve and add the buttons back on since even if you had room for a placket the buttons are non-functioning often anyway. The other thing you can do is much more complicated, you can taper the sleeve starting high up on the bicep and then use the excess fabric (which looks like a chuck of seam allowance now) to create a new faux placket. It will be a narrower than the original but it will still give you that traditional look.
Super helpful and thank you for your reply!