Ron, I just sharpened a factory edge slick trick and compared the new edge to the factory edge, and the new edge outperformed the factory edge by a mile, and I haven't even stropped it yet.
yes that comes from pushing too hard. Lessen the downward pressure. You can also place a small piece of painters tape on both side of the blade to increase friction.
Ron....pretty impressive job. My question is are you actually "counting" the number of times for each side to make them even shaped besides identifying the burrs on each side?? Also, after achieving a 65 sharpening edge rating and when fully assembled back for usage, are these broad heads still weighing the same OR in your opinion find a cut off number of sharpening before you trash the blades??? Thanks TM
In actual time you are looking at 30 minutes per half blade, so 2 hours for one slick trick? Granted, super sharp, but dang. With myself and my two sons shooting them, I'd have to also have a job watching paint dry to have the patience for this.
Ron, I just sharpened a factory edge slick trick and compared the new edge to the factory edge, and the new edge outperformed the factory edge by a mile, and I haven't even stropped it yet.
Its a good feeling, isnt it?
65 is impressive. Well done.
Can you put a link for the sharpness teater? Btw I have 2 single bevel staysharp guides and they work great.
gran trabajo
For new Slick trick blades would you strop them first or shoot them straight out of the package?
whats the difference between the black and grey jig?
65 !!
good job !
Will this guide also work for Wac'em 3 blades?
I have all ur guides an I cant keep the blades from becoming l loosening an moveing....maybe pressing to hard
yes that comes from pushing too hard. Lessen the downward pressure. You can also place a small piece of painters tape on both side of the blade to increase friction.
Ron....pretty impressive job. My question is are you actually "counting" the number of times for each side to make them even shaped besides identifying the burrs on each side?? Also, after achieving a 65 sharpening edge rating and when fully assembled back for usage, are these broad heads still weighing the same OR in your opinion find a cut off number of sharpening before you trash the blades??? Thanks TM
I dont stroke count. The burr is my guide.
Hi, where to buy the sharpener equipment? Thanks
Where can we buy these?
Is that like killing 2 burrs with one stone? 😁
where can I purchase this 🤔
staysharpguide.com
What’s the new sharpener you’re coming out with this summer? Is it specific to a certain broadhead?
We are working on a new sharpening guide for Tooth of the arrow heads.
@@innovativeoutdoorsman5067 awesome! I was hoping that was it. Thanks!
In actual time you are looking at 30 minutes per half blade, so 2 hours for one slick trick? Granted, super sharp, but dang. With myself and my two sons shooting them, I'd have to also have a job watching paint dry to have the patience for this.