How to fix the CDJ 2000 Wait E-8709 Error Tutorial
Вставка
- Опубліковано 22 кві 2016
- Tutorial on fixing the E-8709 / Wait Error on a CDJ 2000 by reflowing the BGA of the two chips on the main assembly using just a heatgun and a screw driver.
I fully covered how to dissemble the cdj, the reason for the error, the reflow process and re-assembly of the unit.
You could also use this tutorial on how to replace the main assembly board. Pioneer Part: DWG1660
Post in the comments if you have questions and I'll do my best to respond.
This should apply to the full line of CDJ standalone products:
Pioneer CDJ 850
Pioneer CDJ 900
Pioneer CDJ 2000
Pioneer CDJ 2000 Nexus
Holy moly. This video is 8 years old. In my life I fixed absolutely nothing so far when it came to electronics. I followed the steps to fix my player and can hardly believe it worked this perfectly. Thank you so much James. Fantastic work.
Glad it worked!!
im about to try
So glad I came across this video, bought a heat gun for £15 and it worked like a charm no issues what so ever! Can’t thank you enough pal!
I Just did fix one of mine that presented this problem. Did It with a hairdryer!!! 3 rounds of 15s on Max heat. I isolated the rest of the board cutting a square hole with the Chips size on a piece of paperboard. Job done! Amazing tip! Thank You so much for the vídeo mate! Helping half of the world with this! Amazing how these Pioneer CDJs are a piece of crap inside...
Thanks! 2024 still saving cdj’s!! Saved my set!
Score!
Today out of nowhere, i got the e8709 error.
I exactly followed the steps.
It worked for me :)
Thanks for the video.
This is a life saver video...! Worked for me 1st time with a hairdryer, 3 lots of 7 seconds at 2cm distance from chips. Thank You James. New mother boards are 405 euros and waiting time right now is 17 weeks, as there is a huge shortage of parts and micro chips due to Covid
Ok this is insane. Just did this to my CDJ and it completely got it working again!!! Thank you James, this tutorial is an absolute life saver.
THANK YOU SO MUCH! I'd lost all hope that my deck would ever work again and then stumbled across this video. Got it working on the 1st try and the deck is as good as new. You're a legend James, many thanks!
Glad it worked!
Io ho lo stesso problema con i cdj850 e-8709
James, thank you so very, very much! Had this error on both of my CDJ 2000s, took them apart following your video and fixed them with a hairdryer. Absolutely stoked!
yep it work for me too... i went and bought a heat gun (Bauer) that had 3 settings and a dial from 1-10 so i used it on high and the number 2 for a few seconds each time as instructed and IT WORKED LIKE CHARM ...ON THE FIRST TRY!! James i cannot thank you enough for the extremely detailed video and saving us time and money! you are the goat!
Glad I could help!
Just want to say thank you! Mine just showed the wait error and booted, didn’t showed the error in red. Just tried exactly what you did but with a hair dryer and is working perfectly!! Thank you a lot!
Glad it worked!
Thanks so much for posting this video. I was desperate and this got my cdj running perfectly!
Fixed my CDJ-2000nexus like a dream! Just 3 zaps of 7 seconds each with the heatgun on the first chip and the TI chip. Thanks!
Hey Afix, 2 years later, does your CDJ still work?
@@Dreamer2go Yep! I sold it a year ago and it was still working great
What was the temperature?
YOU ABSOLUTE LEGEND TAKE MY LIKE AND MY LOVE! This is the only YT tech tutorial I have ever followed that has been successful for me. Thank you!!!!!!!!!!!!!!!!!
Hi, I just want to thank you again , it's a second pioneer I'm fixing because of this video , subscribed on your channel
Thank you! You saved both my cdj's!
WORKED
Hey FX, 1 year later, does your CDJ still work?
hello friend is it still working after so long?
Hi how long you heat it with hair dryer?
You saved my old CDJ 2000 first version :) Thanks so much for your valuable tips!
just want to say i did this and it works like a charm thank you !!!!
IT WORKED!!! Easy job with a hairdryer - thank you so much!!!
You made my day better. Thank you very much now it's working perfectly!
hi, thanks for the video. I tried it and it seems to have woked so far. cheers from Ireland
Glad to hear it dude!
Első kísérlet után sikerült! Nagyon korrekt videó, ahogy te is! Köszönet érte a világ másik feléről!
I did it with a hair dryer and that works to.
Thanks from France dude !!! You save my CDJ, me and my wallet 👍
Hi. How long do you heat that with hair dryer?
Great tutorial! Helped me fix the exact error and refit a broken cable.
Great man! Problem solved!! Thank you so much.
Works like magic.
Cheers from France ;)
Awesome! Glad to hear it.
First try fixed, thx 😍 all credits to you
Thanks a lot! This worked perfectly. You saved me a lot of money. Much respect.
It worked! Amazing! Thank you so much!
Great job James
This worked for meeeeeeeee! Thank you James
hello friend is it still working after so long?
Thanks for video. It's working.
Denis Kukovic great!
How long is the recommended heating time? I recall you said 30s in the video, but your intervals are like 10s - 7s - 6s where the - is about 6s of cooling. Please reply soon! trying this in the next 12 hours
Good work, nice fix 😎✌🏼️
Hey James Ross, really appreciated your video.
As I manage to repaired 1 of my Cdj 2000, but I have a question. The other Cdj shows a waiting loop and automatically restart. Not sure if you've a solution, but would appreciate your comment.
@@DawummbatZXT for me the same fix worked out :)
Thanks a lot! It worked for me, and it works as brand new!! 🎉
Bro thank you so much it worked perfectly. Real public service THANK YOU
Hi. Thanks for the video. I have the same e-8709 on XDJ-R1. Will this way of fixing work with it?
I followed the procedure and at first it worked but when I off and on it, it went back to the WAIT then I did it again and it worked. Something weird also happened, the Cdj always work perfect before I close the back tray but as soon as I close the tray and put the bolt, it will stop working and go back to the wait error. I did that like 4 times before I decided not to put all the bolts on the back tray so I only used 3 of the bolts instead of the 5 and it working perfect ever since. I still don't know why that happened till now. thanks, God bless you.
i am having the same problem on my cdj 350. it shows e 8709. will this work in my case, too? really dont wanna go for pcb replacement
Defo the man of the year 🙏😎
your a god among us mear mortals thank you so much this acually fixed my issue. and it was definitely a temperature thing as a i rented my cdjs out in an outdoor summer event and they were scolding hot to the touch worked fine all night till they cooled down and broke next day..
thank u , so much man!!!!! u saved me 400 bucks!
Drumtech Awesome. Glad it worked out!
It worked for a while, then stopped working. retried process, now screen goes on and off and grainy pixels appear. any idea what the issue could be? is replacing the MAIN ASSY, the solution to all of this?
You sir are the greatest! Thank you so much!! 🙏🏽❤️
I have the CDJ 1000 and the same mistake E- 8709 will be that I can do the same process ??
Amazing this worked for me as well. Thank you!!!!
Good one thanks a lot it works !!!
please i want a video to Disassemble PIONEER CARROZZERIA FH-P66MD
how to connect and reconnect flat cable connections in this device
Thank you James !
question: does this also works with the cdj 800 mk2? my set has also a E-8709 error, and when he gets that error the cdj reboots himself, do you know how to fix that?
I want to know if this works for other pioneers equipments like the DJM2000
With Init errors 0004 ..??
it can also resolve the e-7022 panel cpu error?
Done this today and yes it works ❤
Thanks for the info. Got mine working again although I used a soldering iron at 400 degrees C, put a piece of foil on top off the chips to heat it up and boooom! it works again!
Unbelievable......its works....thanks
Hi mate. Last night i got this E-8709 error msg on my 1000mk3 will it be the same process to fix? My problem is that the circuit boards are different to urs
Life saver. My CDJ2000 was displaying the 'wait' thing, and then i got black screen/restart. After the heating it works perfectly.
Thanks a lot.. it’s really working🙏🏽
Great to hear!!
Great video man! I have the same problem on CDJ-350. Who I fix that?
Helpful thanks,does anybody knows how to fix repair or replace the track searchlight?the one on the search knob,Thanks.,
do anyone know if this also will works with the cdj 800 mk2? my cdj 800 mk2 got the same error and the screen is flashing on and off and he try to reboot and try to read the cd but then the screen goes off and on.
Thanks at first :)
Awesome dude thank you.
thanks man! works on CDJ2000 NEXUS
Great to hear!
Thanks From India it works.
Could this fix a 'Main CPU Error' on a CDJ900 Nexus?
Thanks man! it´s working!!!!
pablo hello friend is it still working after so long?
@@Adriano.uzumaki only for few months, later appear again
@@pablodomingueznunez6267 ok pablo thanks a lot, i'll try to do it tomorrow and try to sell it fast, did you try to do it again?
Hello Man i got a Problem with my cdj2000nexus Player he shows me the E 8302 Error could you tell me how i can Fix the Error? Many thanks by the Way for your Instructions !
You are doing great, you hit the head👌👌👌👌👌👍👍👍👍👍👍
Will it also work with CDJ 1000mk2s
Hey man, I gave it a go not sure if I went to hot or something, but now it powers up but only the track search buttons light up and the CD light at the bottom. Any ideas? And would it be possible to just buy a new one of those mother boards or whatever it is haha.
Onde se consegue a placa?
Hi! nice video! Please could you be so gentle to explain to me how is possible a thing like that? And how did you discover this? How is the reason cause the heating fix the error? And why the chip change the behavior of the cdj like that? What happened to the chip and what do the hot air to the chip? Is incredible. Coul be the humidity? Or the vibrations? Is something connected to the hits when you move the cdj from the case to the consolle? I'm curious! thanks a lot!
hi,Excuse me, I used the hot air gun to solve the problem of the cdj2000 E-8709 according to your method, but using the hot air gun to solve the E-8079 problem, another problem is E-7001, how can I solve this E-7001 problem.
@James Ross
I just use a hot air gun to solve the E-8079 fault, and another fault E7001 will appear. How can I solve it? Can you help me teach me?
If like xbox this fix is probably temporary. People “reflowing” it with hairdryers, a hairdryer is never gonna get hot enough to melt solder otherwise it would be too dangerous to put near your head😂
Headgun would def get hot enough but personally i would recommend if you are reflowing bgas that you run some liquid flux under them first as it will help the solder flow better. Also would recommend a temperature probe to check what temp the board is getting and maybe some foil and capstan tape to protect the other components.
That aside thanks for the info on the problematic board. Good job
I've just had this problem happen to me, I had it fully unplugged for 3 odd hours like someone prior mentioned. I then put the latest firmware onto my usb and went to update bit still had the e8709 message appear. I think turned it off and did a factory reset ( usb stop & disc eject buttons theb power on) on the unit and by miracle perhaps it came right. Don't know if this will help anyone but my 2000 is working again!
Great... Sir I am from India and my pioneer CDJ 850K is showing an error E6002.. I will be very grateful if you could please tell me the reason behind this error and the solution. Thank you
Sangat bagus saya terbantu tototial ini
good job! worked for me... but how do you explain that?
ball grid array that secures the chip to the PCB has heat stress cracks in it. using a heatgun reflows it.
On 850 the part you heated here is a bit different, it's without cable sockets. Is it gonna work this way?
Update: tried 3 times, not working with 850
My CDJ 2000 display fully not working! if i shack that jockey,that jockey's display goes black & hangs! i opened that jockey and cleared the ribbons 1 side! then pioneer dj appears then boot again
what should i do? change the ribbon or something else!
It works!!!
Gracias me sirvió de mucho
This just happened to me in the morning today. May i ask WHY does this happen???
Same Problem CDJ-350 Error E-8097 plz help me
do you know the wattage of the heat gun? I don't want to get one to powerful and fry mine.
Ste Mc D 1500w
James Ross ah that was quick..thanks very much. fingers crossed I don't f#$k it up
Do you know the “E-7022 panel cpu error ” What should i do ?
for me too... did you find solution?
Hi, maybe u can help me, i have a problem with my cdj 2000 non nexus(2010) the sound comes out a little low, i tried to change the RCA module(JACB assy part number:dwa2988) and also ribbon cable(13P FFC part number:DDD1484) but the sound stills coming out at low volume, any ideas? Thank you, keep making videos!!! Matias
What are you hooking the RCA's in to? I would try to use the digital out and see if you still have issues (you can use a regular RCA cable for that too) and just plugin to the mixers digital input. Keep in mind the CDJ's output is going to be at LINE levels so if you are hooking in to something that's non-amplified it will sound quiet.
So, i use my cdj's with a normal mixer, i have 4 cdj's 2000 and the others cdj's works perfectly, i buyed the last cdj with that problem(due to a drink incident inside in a club over the cdj) so it's not a problem between the cables or mixer...im trying to fix but there's no error on display, everything is working apart from the low signal
So how hot the heat gun need to heat up and how long
@James Ross, I would like to know this information too. Debating if I should just use hair dryer instead of going out and buy a heat gun
I did it this and it worked, but later some month it happened again, pls lasting solution pl
Can it work on CDJ-Mk800?
спасибо,помогло👍🏻
nice job man tnx i just change before few days on mine cdj 200 encoders on jogs ... and serviice try to get from me about 200 euros for 15 mins of job
It fucking worked, first try. Let’s gooooooo
Hi, any help with E-7001DISC DRIVE ERROR? thanks
Softmal Music i have this problem e-7001 Disc drive error!!! how do I resolve this error? Please help!!!!!!!
@@dmbpromovents034 I am guessing the ribbon cable is damaged. When I assembled mine, I did a rough job, and totally saw one of the ribbon cables damaged. Must be that
JAMES ROSS AKA... LEGEND!!
Cómo se llama esa tarjeta por favor
Bom dia ! Fiz no meu ontem esse procedimento muito obrigado deu serto show
thanks, but couldn't pull it off... got an error 7001 afterwards... oh well... anyone need any cdj parts? before i fling it against the wall...
saved by the bell... I narrowed down the 7001 error to the cpu ship and not the dsp... so figured i would give that another heating since there was nothing to lose... but b4 i heated it, i let it stay at operating temp with the error while opened... So when i shut it off i could heat it quickly close to operating temp... i then heated it for 15sec. and it worked... so, this heating also solves the error 7001 which is related to the cpu...
@@pwhitney1183 Had exactly the same thing and got a E-7001 Disk Drive error after the first time I heated the chips. Heated both chips again, bit longer now, with a hair dryer and a piece of cardboard as a funnel and my CDJ-2000 works perfectly now.
that sound of of tasters on cdjs and turn of on botun will never change ti 😂🤣
olá, no meu não funcionou! ficou com a tela branca reiniciando, fiquei na espectativa :(