Even thou this will work that rubber boot is to prevent dirt and contamination from mixing with your gas. I’m sure you know those jets in the carbs clogg which makes your bike bog and all that. I wouldn’t dive threw a puddle or a lot of dirt with that honestly. Your carb gon be mad dirty fam fam. If you gon rig it, rig it. Put some black electrical tape around the top of the carb and zip ties and cable. Not to stop the cable from sliding but only enough and sealed to keep the dirt out. Would look cleaner to. 💪🏽 On another note, the cable isn’t to short, all you have to do is get the cable threw the carb top, compress the spring when installing the needle assembly. Pain in the a** sometimes but I never seen someone attach the end of a throttle cable without having to compress the spring like that.
A washer would have worked good, did this to mines but, I used the old throttle cable that has that metal tubing at the end. I just screwed that metal piece that is at the end of the throttle cable and twisted the metal end of cable onto the top part of the carb. May have to install the cable onto the carb then install carb onto the motor
Don't bust out the top of carb cap, I did this but with my own twist just keep carb cap on and pull cable and the slack will help it pull up out of cap and cable there works perfect thank you brother
That gives you and air leak bro. You need that to be sealed or you will have an air leak and it will mess with the idol and tuning causing the bike to run lean
@@MaNNeRz91 pretty sure you don’t know anything about amazon product or what the post is about it’s for Chinese bikes I believe you just a confuse admire this is for the people that want to save money. It’s Either you going to take it and run with it or just keep it moving 🫡
For my 2012 Apollo I got lucky n don't have that extra play in the cable, but when I replaced my shit, the throttle works amazing but when I fire er up, there's a awful clicking/ticking noise... any idea on what's the prob? I checked the spring to make sure it's fully sat on the carb lid ughh
@@Mr215Mar Yes it WAS. While I was working on it I left it in my front porch one night… Woke up & it was GONE. Preciate the comment tho man! Ngl I purchased my firearm after that, it was legit 2 steps from my door. Someone had BALLS smh, shit happens tho learned a lesson.
Definitely not the right way to do it but obv you already know that’s why you titled it throttle hack… everything everyone said is right but do you if it works then get it!!! But next time maybe don’t allow comments cus your terrible with criticism.
Glooks bro helped alot did it to my nephew Chinese atv ya gotta stop hating if ya really know ya stuff then ya wouldn’t be here tryna talk down without knowing
Amazon sell long throttle cables don’t matter which one you get. I been doing this for a minute no problems. Chinese brand horizontal engine not 2 stroke name brand engines
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Even thou this will work that rubber boot is to prevent dirt and contamination from mixing with your gas. I’m sure you know those jets in the carbs clogg which makes your bike bog and all that. I wouldn’t dive threw a puddle or a lot of dirt with that honestly. Your carb gon be mad dirty fam fam. If you gon rig it, rig it. Put some black electrical tape around the top of the carb and zip ties and cable. Not to stop the cable from sliding but only enough and sealed to keep the dirt out. Would look cleaner to. 💪🏽
On another note, the cable isn’t to short, all you have to do is get the cable threw the carb top, compress the spring when installing the needle assembly. Pain in the a** sometimes but I never seen someone attach the end of a throttle cable without having to compress the spring like that.
i had hundreds of bikes never bogged out . you must be a rookie at this. use a fuel filter you want have dirt issues.
@@Mr215Mar you definitely wouldn’t touch my bikes, Chinese or not. Tf you out here doing 😂😂😂😂 fucking people bikes up 😂😂😂💀
@@Mr215Mar wtf a fuel filter got to do with dirt going DIRECTLY in the carb, yeah you know nothing bout bikes fr
A washer would have worked good, did this to mines but, I used the old throttle cable that has that metal tubing at the end. I just screwed that metal piece that is at the end of the throttle cable and twisted the metal end of cable onto the top part of the carb. May have to install the cable onto the carb then install carb onto the motor
Don't bust out the top of carb cap, I did this but with my own twist just keep carb cap on and pull cable and the slack will help it pull up out of cap and cable there works perfect thank you brother
I got the one that goes straight up then you bend it the way you want I don't like that corner bend it wears it out I had one break on me
That gives you and air leak bro. You need that to be sealed or you will have an air leak and it will mess with the idol and tuning causing the bike to run lean
Smh no it doesn’t it’s not a 2 stroke with reeds. It’s a Chinese bike horizontal engine not a kx cr rm or Ktm . CHINESE
@@Mr215Mar glad someone knows 😆 I can literally take the top of my carb off and use my finger to lift the slide with no running issues 😆😆
@@MaNNeRz91 pretty sure you don’t know anything about amazon product or what the post is about it’s for Chinese bikes I believe you just a confuse admire this is for the people that want to save money. It’s Either you going to take it and run with it or just keep it moving 🫡
@@Mr215Mar what the fuck are you talking about now 😂😂😂😂
@@Mr215Mar 4stroke can have air leaks to
u a g good looks
For my 2012 Apollo I got lucky n don't have that extra play in the cable, but when I replaced my shit, the throttle works amazing but when I fire er up, there's a awful clicking/ticking noise... any idea on what's the prob? I checked the spring to make sure it's fully sat on the carb lid ughh
Valves
is the clicking when you twist the throttle ?
@@Mr215Mar Yes it WAS. While I was working on it I left it in my front porch one night… Woke up & it was GONE. Preciate the comment tho man! Ngl I purchased my firearm after that, it was legit 2 steps from my door. Someone had BALLS smh, shit happens tho learned a lesson.
What language is this?
afro- engineering 😂😂😂😂
What
Definitely not the right way to do it but obv you already know that’s why you titled it throttle hack… everything everyone said is right but do you if it works then get it!!! But next time maybe don’t allow comments cus your terrible with criticism.
You a weirdo lol I didn’t even see this lil comment lol guarantee it works that’s why your here trying learn
lmao. just cut the extra throttle wire from the end of the carburator instead of using zip ties.
Smh throttle cord has a little ball at the end to keep the cord from coming out the carb. If you installed one before pretty sure you’ll know
Nice
.......just stretch the outer cable sleeve.
Glooks bro helped alot did it to my nephew Chinese atv ya gotta stop hating if ya really know ya stuff then ya wouldn’t be here tryna talk down without knowing
doing this will result in you throttle being stuck at full
just a warning
yeah you don't work on bikes
@@Mr215Mar ya I actually do and not just bikes quads and trikes as well I own 27 and I'm nearly finished fully restoring most of them
@@Mr215Mar and snowmobiles
Bro it's easyer to compress the spring with a ziptie put the throttle cable on then break the zip🤣
you sound damn why would you zip tie the spring
@@Mr215Mar to easily compress it or use your hands 🤷♂️
I love you baby
Incompetence at its best
It works wether you want to do it or not thanks for the view and comment
Oh hell tf no 😂
UA-cam is down bad for having this shit pop up. Hopefully you aren’t selling this shit
Bike life
I’m doing this now
Like most rigged stuff, itll work but not great.
It works 💯 on all my Chinese projects
I hope no one tries this all it's gonna do is give it a leak an make it idle high an run like garbage
Amazon sell long throttle cables don’t matter which one you get. I been doing this for a minute no problems. Chinese brand horizontal engine not 2 stroke name brand engines
OMG..!!! 🤣😂🤣😂
It works
itl run like shit bro, needs to be sealed!
It doesn’t smh people knock stuff before they try it
@@Mr215Mar just do the job properly in the first place and stop being a cowboy!
Thanks bro bro
low talker !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!