FIX HACK DIY - Garden Hose
Вставка
- Опубліковано 10 лип 2024
- Fixing a typical garden hose connector popping off or leaking issue. Simple DIY guide and a Bonus Tip in the end on how to roll up the garden hose into the reel/roller
Do check out KakiDIY youtube channels for more DIY, Fixing and Hacking videos.
Learn how to diagnose common kitchen / household or even Campervan or Caravan. This is a 3 part video series, watch the other videos in this series on DIY Gas Stove
FIX HACK DIY : Gas Stove Battery Change for Electronic Fire Starter (Gas Stove Series 1/3)
• FIX HACK DIY : Gas Sto...
FIX HACK DIY : Fix Broken Fire Starter / Igniter (Gas Stove Series 2/3)
• FIX HACK DIY : Fix Bro...
FIX HACK DIY : Preventing Yellow Flames (Gas Stove Series 3/3)
• FIX HACK DIY : Prevent...
I agree with Michael White. it needs a much more radical solution. The solution offered (which is obvious) only works for a few days and only when the water pressure is fairly low. I suggest that Kaki DIY looks into the problem in more depth and then comes up with a lasting solution.
I have been doing this for 67 years and have no hose left.
Hhahaha. Good one!!
🤣
😂😂😂 thank you omg 😂
Wrap some white plastic plumbers tape before you push the hose into the connector. Repeat this on other side.
Haha the rainbow at the end. Helpful video. Thank you
Thank You!
Thank you so much ... your explanation was simple & extremely useful. I have the same hose roller like you do. Your tips were awesome! Thank you again.....
Very handy tips
Thanks for watching
Great! Please, no music on videos were something is being taught or explained.
I’ve tried this many times and the water pressure still blows the connection apart. On the softer kink resistant hoses the manufacturer uses a metal collar at either end of the hose to prevent it from detaching.
Same, I’m at my wits end.
I use glue to make the connection permanent. Lasts forever. Still, I like your ideas though.
Second one is for which side?gun or tap?
We have purchase magic woter spaser jat pipe. Now it getting lick form adapter. Pl tall me kya adapter mel sakta hay. I need three pc.
2:50 Please enlighten us as to the brand and model of that watch.
Use garden or copper wire. Make 2 nooses with around 8 inches spare.put them on connection tape to hose double back and tape again. Connecter will not come loose again.
Sorry RoM, your solution is not intelligible. Nooses? Where does the 'spare' go? What is connection tape? Double back to where? Tape again, where?
My problem is that the tap (which is identical to yours) is fine but when connected to a tap connector & hose, water flows out between the tap and the tap connector. I have used 3 different connectors to the hose but this happens every ime. If I disconnect the hose from the tap connector, water flows through without any issue. Any ideas why I'm seeing an overflow between the tap and the tap connector when attached to a hose?
I think the design is flawed.
Australian style hose connections are so fckn shit. Just watched a similar vid from the USA and their connections are so much better than the lame shit we get here. They actually use screw joints at both ends of the hose instead of these shitty quick connect ones we have that constantly fail.
Smashing
Mines leaking from the part you pull down to remove the hose from the tap connector any ideas? I have changed the fitting and still leaking in the same place. The part i am referring to is the part with the arrow on
Same, think it might be a rubber washer issue 🤷♂️
@@davemustabstain7093 I have replaced all of mine and still doing it hozelock said my reel hose has a 9mm connector which is not standard hence why is leaking no one sells them at 9mm
Its such a fundemntal flaw is their any better connectors
Yeah. Sadly the plastic decay and spoil really fast. Maybe try the metal ones.
Use garden or copper wire. Make 2 nooses with around 8 inches spare.put them on connection tape to hose double back and tape again. Connecter will not come loose again.
Buy link
I bought a magic hose online but I have problem to connect it to my tap as the water pressure push away the connector so the hose do not function as it is…. I need help
Try to share some pictures of the hose and the tap to this page facebook.com/groups/kakirepair
we will help you sort it out.
Wind some PTFE tape around the thread before u tighten it up
What size of pipe should be used?
This is for the standard 1/2 or 5/8 hose
I do all that and they still come off again later. Its a crap fitting system.
me too this video dosent fix the problem
I have repeated this fix so many times cutting last 3 cm of hose, that my garden hose is now 1-2 meters shorter :)
I've fixed this but my gun still keeps flying off? Any advice
Try gently tightening with two sets of slip-joint pliers. Being plastic, they will not tolerate a lot of pressure, though. They should be brass.
you didn't show how to fix the spray nozzle which keeps falling apart!
It’s the same steps for the pipes, Done it for both ends.
This technology is flawed. The water-tight connection could be improved by manufacturers use of brass compression rings, but this would likely leak over time from frequent motion.
My version of this hose leaks where the quick disconnect meet the water supply. Nothing to fix this that I know of, except to change to a non-quick disconnect, like I had it in Canada, but I cannot find these in New Zealand.
Also, Canadian manufacturer's designed the higher end hoses with a semi-rigid sleeve to protect the connection from motion that would otherwise weaken the joint at the supply end. Us plumber's don't tolerate leaks in our walls; we shouldn't have to settle for leaks just because its a lawn !
nothing new to see here