@@DatconReels Going to order this MOBO soon, btw should we follow your bios setup change the CSM parameters to UEFI even without a GPU? I dont have a dedicated GPU at the moment
Hello, I want to ask for u, i have this mobo and then i installed win 10 pro, but @ task manager, in RAM Options i doesn't see speed RAM. how to setting th BIOS of this Mobo, for showing the Speed RAM in Task Manager? *Sorry for Bad English
When you open the PC just press delete button many times to enter the BIOS in MAIN you will see the total memory and the memory frequency. If your processor RAM support only 1333Mhz and you put your owned RAM speed is 1600Mhz it will downgrade the speed to 1333MHz, so make sure the your processor support 1600Mhz RAM speed. Update your windows or run CMD press Win+R then type CMD and type this command "wmic memorychip get speed". Please subscribe, Thanks.
I am unable to install windows on m.2 I get the message "windows cannot be installed to this disk ensure disk controller is enabled in bios". I have tried installing windows from another machine and it did not boot. I see the drive in the boot options as well. do you think it could be fixed? Also: orginally drive had windows 10, it booted at first, but I wanted to install Windows 11. That's when it stopped working..
Just select the drive as first boot in the bios. Just watch my other parts of this motherboard. officially this motherboard is not supported by windows 11 due to lock of TPM, but there are ways to force install windows 11 in that unit. but I suggest that use windows 10. Reinsatall windows 10.
Did u try change bios settings for boosting the clock? For some reason I'm getting 2 bin boost (200mhz) instead of 4. It's a 3470, expecting 3.6ghz on single core loads but I only get 3.4ghz
@@DatconReels Thank you. Anyway managed to get it to +400mhz. It turns out that C3, C6 and C7 reporting under CPU PPM has to be enabled (or just one of them,) in order to boost 4 bins. Hope this helps someone.
watch mo ito yong board at m.2 ang gamit ko ua-cam.com/video/EvVV654YNdQ/v-deo.html. Sa nasa search ko NVME PCIE 3.0 x4 kasi na read nya rin yong Adata XPG SX8200.
Kapag naka set yong jumper to 1-2 means pwede kang gumamit ng M.2 NVMe ssd kapag 2-3 na jumper M.2 SSD ang pwede mang gamitin pero yong kulay orange na SATA 3.0 (speed 500-600) di mo na magagamit. yong block na SATA 2.0 (300 mb/s ang speed) dun ka mag connect kapag SATA drive ang gagamitin mo yong 2.5' na drive. Don't forget to subscribe. Thanks
Quick question, once the M.2 nvme jumper pins are set to pin 1 & 2 for pcie, can the other sata 2 & 3 connections work?
Yes working ang mga SATA. Kapag PCIE NVME. diko pa test kapag M.2 SATA ang gagamitin. Pero malamang SATA 3 lang ang gagana.
@@DatconReels sorry I dont understand tagalog
Yes SATA are working in M.2 PCIE protocol. M.2 SATA I think one of SATA2 or SATA3 will not work.
Thank you for the info, much appreciated
@@DatconReels Going to order this MOBO soon, btw should we follow your bios setup change the CSM parameters to UEFI even without a GPU? I dont have a dedicated GPU at the moment
Sir, tutorial naman po kung paano install yang motherboard na yan, sa mga bagong case ngayon. Ganyan din sana build ko..
Pasok naman ito kahit sa M-ATX or ATX na mga kasing. wala pa kasi kaming bagong case. gagawa din kami.
@@DatconReels ganon po ba? Thanks sir! Wait nlang kame. Haha
Hello, I want to ask for u, i have this mobo and then i installed win 10 pro, but @ task manager, in RAM Options i doesn't see speed RAM. how to setting th BIOS of this Mobo, for showing the Speed RAM in Task Manager?
*Sorry for Bad English
When you open the PC just press delete button many times to enter the BIOS in MAIN you will see the total memory and the memory frequency. If your processor RAM support only 1333Mhz and you put your owned RAM speed is 1600Mhz it will downgrade the speed to 1333MHz, so make sure the your processor support 1600Mhz RAM speed. Update your windows or run CMD press Win+R then type CMD and type this command "wmic memorychip get speed". Please subscribe, Thanks.
I am unable to install windows on m.2 I get the message "windows cannot be installed to this disk ensure disk controller is enabled in bios". I have tried installing windows from another machine and it did not boot. I see the drive in the boot options as well. do you think it could be fixed?
Also: orginally drive had windows 10, it booted at first, but I wanted to install Windows 11. That's when it stopped working..
Just select the drive as first boot in the bios. Just watch my other parts of this motherboard. officially this motherboard is not supported by windows 11 due to lock of TPM, but there are ways to force install windows 11 in that unit. but I suggest that use windows 10. Reinsatall windows 10.
@@DatconReels thank you for the reply I will try and post an update here.
@@theghostedside and also if it doesnt detect remove jumper from right to lef
Did u try change bios settings for boosting the clock? For some reason I'm getting 2 bin boost (200mhz) instead of 4.
It's a 3470, expecting 3.6ghz on single core loads but I only get 3.4ghz
I never try boosting the clock since this board don't have proper bios update or recovery bios site or support.
@@DatconReels Thank you. Anyway managed to get it to +400mhz. It turns out that C3, C6 and C7 reporting under CPU PPM has to be enabled (or just one of them,) in order to boost 4 bins.
Hope this helps someone.
Subscribed! Lods ano yung read and write ng m.2?
watch mo ito yong board at m.2 ang gamit ko ua-cam.com/video/EvVV654YNdQ/v-deo.html. Sa nasa search ko NVME PCIE 3.0 x4 kasi na read nya rin yong Adata XPG SX8200.
Please benchmark nvme SSD and sata drive sequential read and write....
M.2 nvme pcie gen 2 x4 max speed 2000mb/s and M.2 SATA max speed 500mb/s, and in SATA port 500mb/s. please subscribe. Thanks.
Will it supports i7 3770k cpu and it's overclocking very well
Personaly I dont have that kind of CPU, but I saw a video at same board and processor and it run but you cant overclock on that board.
boss hindi po gagamit ng m.2 ssd . dapat po bang naka 2-3 yung pin para sa SATA 1?
Kapag naka set yong jumper to 1-2 means pwede kang gumamit ng M.2 NVMe ssd kapag 2-3 na jumper M.2 SSD ang pwede mang gamitin pero yong kulay orange na SATA 3.0 (speed 500-600) di mo na magagamit. yong block na SATA 2.0 (300 mb/s ang speed) dun ka mag connect kapag SATA drive ang gagamitin mo yong 2.5' na drive. Don't forget to subscribe. Thanks
Kapag ang jumper 1-2 , pwede mong magamit ang kulay orange na SATA 3.0 (500-600mb/speeds) para sa SSD SATA drive. Don't forget to subscribe. Thanks
@@DatconReels Sata na Orange lang gagamtin ko bali boss sa 1-2 lang.
@@cowneloalvaroids2387 yes 1-2 lang. Pero don't forget baguhin ang bios mo legacy to UEFI para ma read yong SSD mo. AHCI for SATA mode.
Send link po boss
Check this link: bit.ly/3HXLZNJ