Seriously, you're a king, making planes of this size so light and so detailed is a real achievement. But for me your biggest success is the simplicity of construction and especially the low cost that you get by building light if I dared I would ask you for a P38 ligthning but any model that comes from you will do. And above all thank you very much for the free sharing of the plans that is the RC spirit
ATM NumaVIG is probably the best builder around,. The video instruction is easy to follow giving noob's a chance to have a go at making one. Thanks man. And yes, l second a P38 too, or a ME 262 ?
It looks amazing when flown slow and smoothly. The 3D stunt moves make it look weird, but it's still nice that you have the climb power to get out of trouble easily
@@RS4-AIRLINES After reading the description, I would just use a motor, that has more kv ( that is the number of rotations per minute at a certain voltage.) So a 2405 sized Motor with about 1800 to 2500 kv. Note that I am no expert and have not built the plane myself. Edit: 50 km/h is not that fast, for a airplane of that size. I have one about half the size, that goes 60 km/h and with a bit of experience it is still well controllable.
Looks like very stable and nice flying characteristics of this plane, suppeeerbbbbb built with ultimate detailed. i hope you enjoy flying this plane. 😃
Мой сын любит лепить из пористого пластилина, когда тот высыхает, превращается в довольно плотную и лёгкую пену. Нагрузки на сжатие держит отлично, но немного ломкая на изгиб. Мне кажется, из такого шикарно бы получались плавные обводы, особенно в копийных моделях. Например какие-нибудь детали фюзеляжа, вроде радиатора у мустанга, или фары и воздухозаборники на капоте двигателя.
I've try many spitfire from Esky flitetest and this guy's spitfire. They all tail heavy for some reason even though I've balance it properly. Other models like mustang didn't have this issue at all, I don't know where the flaw is but it didn't really matter because spitfire look better when it fly slow.
Soy Marlon gonzalez de nicaragua. Donde puedo encontrar esos modelos de avion para cpmprarlo o si tienes un contactoby me lobhaces llegar y comprar uno de estos modelos y hacermelo llegar como cuanto cuesta en dolares .espero Respuesta
I think you can but I recommend adding some reinforcement for the front area with balsa wood. And make sure you re balance it, this model seems to be little bit tail heavy, it'll be a problem if you use glow engines.
Inspiring work honestly! Your videos are amazing as well as the result. Bravo! If I may ask, how much flying time does the battery last for approximately?
I remember me flying my rc sports cub it was blue I was flying with the wind and I was lucky that I didn’t crash my rc sports cub plane and I did a good landing
Seriously, you're a king, making planes of this size so light and so detailed is a real achievement. But for me your biggest success is the simplicity of construction and especially the low cost that you get by building light if I dared I would ask you for a P38 ligthning but any model that comes from you will do. And above all thank you very much for the free sharing of the plans that is the RC spirit
ATM NumaVIG is probably the best builder around,. The video instruction is easy to follow giving noob's a chance to have a go at making one. Thanks man. And yes, l second a P38 too, or a ME 262 ?
@@fccp4348 He hasnt uploaded for two months, i think we have killed him
@@martin.k240 lt's the Olympic season, give the dude a break.
11
I love the fact that it is so light that you can do seriously easy take-off and landings with minimal risk of damage!
Sounds just like a real airplane at 7:10 . Cool!
Your planes are very awesome.Big love from Pakistan.
Отличный самолёт,красивый и летает достойно,пилоту и оператору отдельное спасибо за крутые кадры пролетов на малой высоте👍👍👍👍👍
It is super light for it's size. Grate plane!
Looks great ! Flies great ! For a great low price ! Winner !
Very Nice plane! Love from Norway!
I waited until I'd watched all 3 videos to comment. Amazing, simply amazing! What excellent craftmanship! Well done, sir!
Couple of nice scale speed fly passes and butter landings 👍🏻
Bello, docile e maneggevole. Complimenti e grazie Numa Vig!
This is my favourite RC plane build. *Standing Ovation*
very beautiful flight with beautiful plane sir
It looks amazing when flown slow and smoothly. The 3D stunt moves make it look weird, but it's still nice that you have the climb power to get out of trouble easily
Great flyer and very good looking airplane Sr. Congratulations!
So nicely filmed. Like the slow fly bit
This flies really well and slow too. 👍👏👏👏
For my taste it´s a bit too slow, but I Could just add a bigger Motor to it.
@@jannescd24 which engine should I use bc I want it to go like 50kmh/30MPH
@@RS4-AIRLINES After reading the description, I would just use a motor, that has more kv ( that is the number of rotations per minute at a certain voltage.)
So a 2405 sized Motor with about 1800 to 2500 kv.
Note that I am no expert and have not built the plane myself.
Edit: 50 km/h is not that fast, for a airplane of that size. I have one about half the size, that goes 60 km/h and with a bit of experience it is still well controllable.
@@jannescd24 thanks!!
Great foamy Spitfire, I will build it! Thanks for sharing bro!
He not only builds well, he flies well too!
It's just INCREDIBLE to keep going!
Looks like very stable and nice flying characteristics of this plane, suppeeerbbbbb built with ultimate detailed. i hope you enjoy flying this plane. 😃
Thanks for the inspiration, and detailed and well made video’s!
Мой сын любит лепить из пористого пластилина, когда тот высыхает, превращается в довольно плотную и лёгкую пену. Нагрузки на сжатие держит отлично, но немного ломкая на изгиб. Мне кажется, из такого шикарно бы получались плавные обводы, особенно в копийных моделях. Например какие-нибудь детали фюзеляжа, вроде радиатора у мустанга, или фары и воздухозаборники на капоте двигателя.
Nice job! If you attach wheel tail at the rudder, takeoff and landings will be better. Or add a servo to the wheel tail.
Hermoso modelo el Spitfire, grandioso trabajo el que haces, me has dado horas de entretenimiento siguiéndote, grande Maestro!!!.
I watched all these today , great skills there ! Really nice to see 🇬🇧👍👍
Awesome plane. Great job, keep it up!
Классный самолёт! Шикарно выглядит, очень копийно.
8:11 Thats awesome
Cool plane! It looks great!
Good job and very nace plane....👏👏👏
make IL2 sturmovig pls
woa, a STOL Spitfire!, which camera do you use on board? must be a light one!
Mobius Mini
@@NumaVIG cool! i just have the original one. The video in this new one looks better
Awesome ❤️
Does it have an air inlet intake??If not what ESC do you bought?or how do you keep cold the ESC?
all answers in build videos
Отличные полёты.Супер!
and it sounds like a real propeller plane when flying by!
Can you make a plane using sunpack sheet/corosheet/future board?these boards are widely available here.foam boards are expensive here..
Nice job on the design/build, very inspiring. Did you try adjusting the CG forward? It seems a little tail heavy.
I've try many spitfire from Esky flitetest and this guy's spitfire. They all tail heavy for some reason even though I've balance it properly. Other models like mustang didn't have this issue at all, I don't know where the flaw is but it didn't really matter because spitfire look better when it fly slow.
Mustang has the longest nose among all warbirds
@@NumaVIG Have you done a Mustang build?
Great plane and flight
Das Video ist klasse. Wo bekomme ich diesen Bauplan? Würde sie gern nachbauen
Гарні моделі робить.Клас!
Great work. Thanks for sharing with us. Have you think to build short sky van, maibe în the near fluture? I like that plane.. Cheers
Hi, what is the top speed?
That is AWESOME!
Reminds me of the parkzone Spitfire.
что это на 8:20? пробежка за моделью с камерой?)) очень круто смотрится!))
будь ветер посильнее можно было и пешком
Что за камера использована для съёмки с крыла?
mobius mini v2
@@NumaVIG Спасибо
Очень красиво!
Hay quá bn ơi
Vc é um mestre. Parabéns.
Good flying THE THROWS ON THAT KITE.... INSANE... MORE LIKE A STUNT PLANE... hahahahaha
Brian
London
wow amazing....👍 👏
Soy Marlon gonzalez de nicaragua. Donde puedo encontrar esos modelos de avion para cpmprarlo o si tienes un contactoby me lobhaces llegar y comprar uno de estos modelos y hacermelo llegar como cuanto cuesta en dolares .espero Respuesta
Impressive!
NumaVIG, на какую высоту поднимали свои модели? Хотелось бы посмотреть с камерой обзор макс высоты.
альтиметра нет, обзор с максимальной высоты показан в видео
Amazing warbird!!! Can you please make F4U Cosair in the next video? Thanks a lot
What controller are you using?
El motor de cuánto es y la Batería cuantos Amp tiene . Gracias.😅😅
read the description below video
Вы используете камеру для съемки с крыла самолета. Пожалуйста, посоветуйте камеру. Она у Вас пишет на карту или FPV?
Mobius Mini
Летит очень достойно👍
Hey! Will I be able to make these planes but without the wood material?
hello i want to make a 1600mm can you teach me how to scale the drawing
awesome .... thank you :)
Отличная идея и отличный результат! Одно не могу найти- где купить такой мотор?
см. чертежи
Hey ! Good job ! What do you use as a camera on the plane? thank
Mobius mini
Неужели вручную сделано?
И... жёсткие посадки, однако.. :)
есть 2 видео где все производство показано
beautifuuuul!!!!
can I put a glow engine like os 15la on it?
Избыточно! Или стройте не из пены, а целиком из бальсы
@@IvanKogedub of course by adding neccessary reinforcements, what I am most concerned about is max weight for the 41" wingspan
I think you can but I recommend adding some reinforcement for the front area with balsa wood. And make sure you re balance it, this model seems to be little bit tail heavy, it'll be a problem if you use glow engines.
mitsubishi zero in next video?
What is the thrust of the motor?
ua-cam.com/video/BP7SGxTe-1c/v-deo.html
Inspiring work honestly! Your videos are amazing as well as the result. Bravo! If I may ask, how much flying time does the battery last for approximately?
10 min
@@NumaVIG Awesome! Thank you man, keep up the good work!
Can it land on its wheels?
3:12
6:47
Приветствую тебя NUMA VIG!!! Есть ли в планах сделать Fw-190?
Очень хочется....
Can you make dusty crophopper
Hello ! can you guide with 1 video about making f16 aircraft?
Урааа!!!)))
Wow!!!!
А не будет на канале что-нибудь типа АН-24?
maybe you can make U.S. p-400?
Looks a little tail heavy…I’d add a bit of weight to the nose.
You can insert plans as pdf file
Hi, just interested I'd its possible to buy an airplane off you?:)
Нума, здравствуйте. Планируете делать пилотажную авиамодель?
Extra 330 есть на канале
Я знаю. Я имею в виду новый проект.
Please make a F4U Corsair
i want one, a German Plane... i don't know the make but if u could make one...
Please please PLEASE Make a Cessna 310... It would mean a lot to me
Hey
build the concorde
Pleaseeeeeeee
Awesome..
Epic
Very butifal model but it so slow. I build this model 1200mm wingspan and with motor 2212 1400kv
Cool
I remember me flying my rc sports cub it was blue I was flying with the wind and I was lucky that I didn’t crash my rc sports cub plane and I did a good landing
The take of was a bit wierd
A6m zero please!!!!
Следующий ЯК-3?
Please make corsair
Please make a realistic F22 plane
Самолёт класс но был бы под мотор 2208
very good