Andrew, it's easy to make a two stick control by using a couple of small u-joints and rerouting some of the hydraulic lines. And putting the clam open and close on a foot peddle. Then the sticks act like your excavator controls.
Yup. I'd use quality parts for it tho. Rerouted controls are only as good as the feel they get and sometimes people skimp on parts aaand it absolutely sucks as a result. Steering components from the most popular (local) vehicle will work for this application on account of being quality (by way of having to be quality under law since steering components) and cheap because they're for a popular vehicle, hence common and abundant since everyone stocks said parts.
Multiple levers is no big deal at all. After just a little while it becomes second nature. Then you stop thinking about what lever to use and just do it. I say, do not convert it. If you want to change it into two cross pattern levers and one more make sure what functions you can use at the same time. Sometimes oil can flow in the wrong direction under load. A bigger problem might be the slow speed.
Well, given we are currently in a deep freeze and covered in snow here in the north east which covers Andrew’s corner of the world my guess would be this was summer ‘22.
What makes me like Andrew is the guy has numerous $50,000-$100,000 rigs but he drives a truck that’s beat up worse than my WORK truck. He’s doing exactly what us good ole boys would do if we had any money at all. Very envious of him that’s for sure. I bet it makes all those 12 hour editing sessions worth it. He’s that guy everybody out in the country talks about that drives an old beat up truck and wears overalls that has an incredible amount of money 😂
Andrew must have a treasure trove of videos to choose from. We go from current winter Montana snowmobiling trip to older new machine purchase in the summer (Sam videoing). Love this channel.
Except knowing AC, he's had this video chillin on the SD card for 1.5 years or so, & the right time for him to edit masterfully as he does his way, & out to us 😊🤣👍
@@proven6270 haha right? Who knows. I think since Sam is in it, this is summer 2022,however. @cerebralailment has some much more timely released vids that give clues to actual Timeline. Pretty cool.
Andrew, I nominate you for a full professorship at the school of hard knocks. Your work ethics is outstanding and your persistence is exemplary. We all enjoy when you “Camarata” a challenging project. Stay safe, millions appreciate you.
Once he runs those controls for a while it’ll get a whole lot faster. He is just used to running joystick equipment. Placement of the machine for loading and unloading will make it easier also. It’s all just experience with that piece of equipment.
A 5 stick prentice was my most favorite machine I loaded logs with. Not everyone can do it and damn fewer can do it smooth….highest compliment I got was from a truck driver that said I was one of the ‘damn few’😂 keep at it! You will get the hang of it
Captain Slogger oooh i just noticed something, you can now use the grabber to break the beading on any of your difficult tyres when you need to change and work on punctures - good idea
That's like a skidder and used in place of a skidder. It's used to get timber out of the brush to the landing where it's transferred to a log truck. They are designed for a 1000 foot trips. They are extremely productive
@@jasonh4167 pretty much but most skidders can't haul the same load. Faller bunches down the trees and piles them then this thing loads up runs it to the landing and is unloaded by the loader on the landing it's faster and the loader operator sorts the logs then loads the log trucks usually hiway trucks
The truck looks awesome on my new 10'x25' projector screen. I was standing in the Dining room when you swung the boom around and said " There goes the bar". The clarity in this video is remarkable !
Well done Marty, my older brother is just like you , he enjoys old Equipment and restoring them. Right now he's restoring old gardener tractors, he's has a slue of them. Enjoy your videos.
Love the drone shots with separate audio- adds a really cool perspective I don't see anyone else doing Have you thought of fabricating a trailer with log bunks to move logs around? That would be a very interesting welding project
I ran across this video just now today and thought that I had missed it a long time ago, and this was hard for me to believe. Then as you worked with it, it appeared to be cumbersome to operate. Slow driving and confusing with the sticks operating the back boom. Then you got out and you handled the logs with the small excavator instead. What a difference.
I understand the learning curve with this one for sure. We have a grapple truck at work that I'm trying to learn on in my spare time and it's going to take a little doing haha
Around here they use big tractors conected to 4 wheel drive logging trailers with a similar crane on, that way they have the power and weight of a big tractor and the speed to move the load. Valtra tractors being one of the most popular choices. Some have the crane mounted on the tractor so they can load/unload trucks so makes them dual purpose.
Andrew i love your videos i like the fact that you show us the whole video from the beginning of the job to the end of the job long videos are the best Guy San Diego
I’d love to own an old log truck with grapple loader. There’s a ton of them around me for sale that aren’t really “road worthy” but they’d be great yard trucks around a big property like yours.
@@AndrewCamarata I’ve gotta move my 40’ shipping container on my property in a few days. I looked back to a few of your older videos to see how you’ve best moved them around. I had called a few places they all quoted me $1500-1800 to drag the thing 500ft. I can rent a D3 dozer for $425 a day I couldn’t believe those prices. Looks like I’ll be renting the dozer for a day. Thanks for all the videos!
wow...love that machine, does not look like it has many hours on it...i have a forestry company here in nova scotia canada and every time I watch your videos it reminds me of the countryside here...good work, always look forward to the next video
Designed for short trips with BIG logs to reduce loading and unloading time I would think. Thanks for the aerial shots so nice to see all the green again.
Must have been spring/early summer. Sam with long hair. Nice to see her back in a video. Need to practice with the claw machine at the arcade. AC toys for the win!
You are a natural Andrew. Your videos are informative, visually appealing and dare I say entertaining. Hollywood has it all wrong. Be a STORY teller. Nothing more. Nothing less. And so may I suggest if this excavating and heavy machinery gig should fail (I know, not likely), filmmaking can easily be your next venture. EVERY you tuber can take your videos as examples of how they should make video. If they did, I would once and for all kill my cable TV sub. Thank you Andrew, for giving so much of yourself.
Yep Andrew, that's a proud old JD. A real beauty. But I believe it might belong in the category of a couple proud old machines I've purchased over the years. Those are the ones my wife says, as she's walking away, "You can leave the keys in it. Nobody's going to steal it." That said, have fun in your old JD and your videos are fabulous!!!!
Looks like a waste of money on this one Andrew. So sorry you and Sam didn’t work out. You’re a great guy and a very hard worker. Just need to sell some of that old equipment and get a few in better shape. Great job Andrew!
Kinda surprised you bought that JD TimberJack - usually these are the machines you use when you don't have great roads, can't get excavators in/out quickly enough but they load slower than an excavator, they drive slower than a dump truck and can't dump the load (you have to pick off the bundles) but you need them when you need them in certain situations. They are not great at any one thing, but they can do it all - just painfully slowly. They have their place I guess. Curious to see how much you use this Andrew. Especially since you have all that other equipment and have multiple excavators so they could hypothetically work on both ends (load point and unload point). Either way, have fun with it. That's what toys are for !!!! Love your videos - keep them coming !!!!
ye hell probably sell it soon if not already done, if then not loosing much money, and with some experiences richer, and fun and video etc i think i made my point
@@iffykidmn8170 This unit is actually a Timberjack/John Deere C50 ..... the green paint/yellow stripe, Deere logo and C50 designation indicate that quite clearly. Either way - It's really not important to the point I made anyways.🤣🤣🤣🤣🤣
@@ezm6153 Could very well be but it looks an awful lot like the Tree Farmer I ran back in the 80/90s , AC even refers to it as being the same in the description.🤔
Those machines are pretty awesome i've seen them on another channel. They are very slow especially on a mountain that you have. I have seen them be used in a small residential area after the trees have been cut and they have smaller logs and not working on mountains
Glad i saw this. I was thinking of getting a used forwarder/loader but i got a log trailer with loader to attach to any fast tractor. Its a lot larger and difficult to move in tight areas but in comparison it is a lot faster at loading. If a wheel loader could pull a trailer i'd just use that.
Suggestion 4 ya Andrew. Maybe make a hydraulic slid out axle rack on the back. That extends out 6 or 8 feet for those longer logs this would also help spread the load. Since the wheel base is so close together.👀 Plus a bigger radiator wouldn't hurt.🤔👍👍
I drive forwarders (mainly John Deere nowdays) for a living and must say that technology has advanced looong ways since these things were brand spanking new.😀
I don’t blame you Andrew…. I instantly thought that thing was terribly slow. It’s probably nice when you don’t have roads and you are deep in the woods but even loading it seems slow too. But they do have their purpose when you can’t have extra equipment in the woods to load it. Good call on using the LMTV or even your haul truck.
Andrew I have been watching guys since September operate a very similar piece of equipment picking up hurricane debris, down here in Florida. It doesn't look easy. But I promise you will get faster.
Is Sam back to stay or is this just an old video,I really enjoy your videos Sam just adds an extra layer for me . I am anxiously awaiting the start of construction on the new castle, if I was 50 yrs younger I think I would move there to help and learn.
I'm guessing the slow speed is just too keep you from ripping through the woods too fast. Need that tire aired up before it tears off the rim and gets damaged. Interesting video.
Only way to know is to check the pressure - some of those tires are designed to run pretty darn soft so they grip better - not sure on this specific equipment (or the tire rating) - but I saw that too - but just thought maybe it's supposed to be that soft.
As soon as I saw the shot of the forwarder coming up the hill with the 2 dogs laying down watching & waiting I thought that's the sort of framing Sam used to do.......!!!
Hi Andrew when loading your picker hauler always load the heavy end or big end of each log towards the front or will be riding Willey's all the time bud
I’ve been a subscriber for years and I love when I hit the comments my boy Andrew is still commenting back with people I’ll never forget the concrete apron video I said that ain’t holding up he comments said he will do a update video in a year and he did concrete wasn’t broken I’ve watched every video since
I own one of these and its made by a different company, name is worn off but think it was a Kobelco... sounds like that name any how. It was made to go out in the woods and load logs to keep them out of the mud and rocks. It will travel over some terrain that is just unbelievable and still just come right out of bad ground. The biggest advantage of mine is it has the same controls as a excavator and so its not just one function on each lever. You have ran enough excavators to know what a advantage that is when you just plant your two hands on two levers or one in each hand. I did shorten the log stakes as its just way too top heavy and wants to roll a lot when on steep sidehills. I can still load just as fast if not faster than you can if they are regular logs an not bits and pieces of firewood. Like I said, if used in the brush where the tree fell at, then no rocks or mud to get into the chain or sawblade.
Never watched this channel before, but it seems you have a pretty nice piece of equipment, just need to get a hydraulic controller that works for you. It's just hoses and handles. Change it up to little toggle buttons where they feel comfortable. Small price in the big picture maybe? That thing will still be running, when the $500K machines have broke down. Point is, keep that machine. Slow and steady never killed anyone.
You don't need anything to move mountains. They move them selfs. It's just a result of tectonic plates moving around. Wait a bilion years top and you're good. Job is done
My Terramite backhoe/loader has the old school six stick config for the backhoe controls like that skidded. It does take some getting used to. I thought about changing it out to dual wobble sticks, but now I don't even look at the sticks when using it.
@@Bulldog532 An extended log bunk does not make it a forwarder, I ran one of these back in the mid 80s early 90s as well as Franklin, Iron Mule and Timberjack.
A forwarder is great if you have long pulls with the skidders, but on short pulls a skidder is faster. We use the skidders to pull the logs to a landing then the forwarder loads there and hauls out to the truck loading site if the pulls are long. And with a little practice you can get just as fast operating it as you can with joysticks.
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Andrew, it's easy to make a two stick control by using a couple of small u-joints and rerouting some of the hydraulic lines. And putting the clam open and close on a foot peddle. Then the sticks act like your excavator controls.
I´ll really like if Andrew do that mod.
Yup. I'd use quality parts for it tho. Rerouted controls are only as good as the feel they get and sometimes people skimp on parts aaand it absolutely sucks as a result. Steering components from the most popular (local) vehicle will work for this application on account of being quality (by way of having to be quality under law since steering components) and cheap because they're for a popular vehicle, hence common and abundant since everyone stocks said parts.
Animemos a Andréw que haga esta modificación interesante. !
Multiple levers is no big deal at all. After just a little while it becomes second nature. Then you stop thinking about what lever to use and just do it.
I say, do not convert it.
If you want to change it into two cross pattern levers and one more make sure what functions you can use at the same time. Sometimes oil can flow in the wrong direction under load.
A bigger problem might be the slow speed.
@@gustavoflash5926 i bet it's on market place already
Being an IT dude it's nice to see someone else forwarding the logs
😂 OK but reading those logs is another story...
OMG, I hardly ever comment but I'm in IT too and forwarding
eading logs had me laughing.
Funny comment. I believe Andrew's an IT guy too, like me, with a degree in comp sci.
I do sys admin for a large company and this totally got me laughin
....yeah watch out for the ELK.
I love when Andrew uploads, it's like "What did Andrew buy today!?!"
would you not love to follow Andrew around an auction where he is looking for goods?
@@suzylarry1 Not really.
@@suzylarry1 Yes I would
@@swampwhiteoak1 Party pooper 😂
I think the same thing
Hard work, doing what you love, learning as you go, getting better everyday, sharing your discoveries, giving your opinions.... Well done, Andrew!!!
Love seeing Sam giving everything a go, she is what we call in Australia a full on Chickie Babe. Best compliment ever.
If you find a woman who will run equipment, hang onto her.
I wonder if this is an old vid because I thought Sam was gone.
this is an old vid and sam was a gold digging dyke he was lucky to get rid of it
Well, given we are currently in a deep freeze and covered in snow here in the north east which covers Andrew’s corner of the world my guess would be this was summer ‘22.
@@MrGatlin98 yes AC and Sam have parted ways.
Andrew must be on a first name basis with every lowboy operator in NY by now. 😂
I'm surprised he hasn't bought one yet with all that equipment he has.
Oke
Anh em
@kman 4443 only a matter of time
What makes me like Andrew is the guy has numerous $50,000-$100,000 rigs but he drives a truck that’s beat up worse than my WORK truck. He’s doing exactly what us good ole boys would do if we had any money at all. Very envious of him that’s for sure. I bet it makes all those 12 hour editing sessions worth it.
He’s that guy everybody out in the country talks about that drives an old beat up truck and wears overalls that has an incredible amount of money 😂
How many people were like
I guess I’m gonna find out what a log forwarder is
I thought for a second: hmmm, a machine that moves logs forward. 😉
Had no idea!
Always called them “cherry pickers” around here lol
Looks like a skidder and loader all in one.
It’s made to get logs from deep within the woods to the landing. So moving the logs forward to be loaded on to commercial trucks
Andrew must have a treasure trove of videos to choose from. We go from current winter Montana snowmobiling trip to older new machine purchase in the summer (Sam videoing). Love this channel.
The easiest thing I've ever seen Andrew start, for just a split second, you can see, he can't believe it also!
I love summer videos in the middle of winter. It gives me hope. Great as always Andrew!
Except knowing AC, he's had this video chillin on the SD card for 1.5 years or so, & the right time for him to edit masterfully as he does his way, & out to us 😊🤣👍
@@proven6270 haha right? Who knows. I think since Sam is in it, this is summer 2022,however. @cerebralailment has some much more timely released vids that give clues to actual Timeline. Pretty cool.
Andrew, I nominate you for a full professorship at the school of hard knocks. Your work ethics is outstanding and your persistence is exemplary. We all enjoy when you “Camarata” a challenging project. Stay safe, millions appreciate you.
Yat me to buddy 👍
hope you had a great time out West..you probably needed a break..mentally and physically..one of the hardest workers on YT..
At the speed that thing loads and hauls, I'm surprised Andrew hasn't sold it already. That little Kubota smoked it.
It's on marketplace lol
Never add cold water to a hot engine without it running, preventing damage to engine.
@@edhansen8531 grandpa, you got lost in the wrong comment.
Once he runs those controls for a while it’ll get a whole lot faster. He is just used to running joystick equipment.
Placement of the machine for loading and unloading will make it easier also. It’s all just experience with that piece of equipment.
operator error!, if he cant load or unload sitting next to a pile in 10minutes or there abouts there is a problem.
A 5 stick prentice was my most favorite machine I loaded logs with. Not everyone can do it and damn fewer can do it smooth….highest compliment I got was from a truck driver that said I was one of the ‘damn few’😂 keep at it! You will get the hang of it
Your feel for machinery operation is amazing!
Captain Slogger
oooh i just noticed something, you can now use the grabber to break the beading on any of your difficult tyres when you need to change and work on punctures - good idea
*tires
@@SeanONeill13 Yup, i was tired
That's like a skidder and used in place of a skidder.
It's used to get timber out of the brush to the landing where it's transferred to a log truck.
They are designed for a 1000 foot trips. They are extremely productive
the skidded is just as efficient when a proper bundle is choked up on the winch. like 10 full trees de-limbed.
@@jasonh4167 pretty much but most skidders can't haul the same load.
Faller bunches down the trees and piles them then this thing loads up runs it to the landing and is unloaded by the loader on the landing it's faster and the loader operator sorts the logs then loads the log trucks usually hiway trucks
The truck looks awesome on my new 10'x25' projector screen. I was standing in the Dining room when you swung the boom around and said " There goes the bar". The clarity in this video is remarkable !
Well done Marty, my older brother is just like you , he enjoys old Equipment and restoring them. Right now he's restoring old gardener tractors, he's has a slue of them. Enjoy your videos.
Love the drone shots with separate audio- adds a really cool perspective I don't see anyone else doing
Have you thought of fabricating a trailer with log bunks to move logs around? That would be a very interesting welding project
I ran across this video just now today and thought that I had missed it a long time ago, and this was hard for me to believe. Then as you worked with it, it appeared to be cumbersome to operate. Slow driving and confusing with the sticks operating the back boom. Then you got out and you handled the logs with the small excavator instead. What a difference.
I understand the learning curve with this one for sure. We have a grapple truck at work that I'm trying to learn on in my spare time and it's going to take a little doing haha
For shore get ready you so a master strategy to get the hang on it.
Around here they use big tractors conected to 4 wheel drive logging trailers with a similar crane on, that way they have the power and weight of a big tractor and the speed to move the load. Valtra tractors being one of the most popular choices. Some have the crane mounted on the tractor so they can load/unload trucks so makes them dual purpose.
I really enjoy 😉 watching Andrew's progress...
Andrew i love your videos i like the fact that you show us the whole video from the beginning of the job to the end of the job long videos are the best Guy San Diego
8:20 Would love a whole series of Andrew teaching us how he operates his various machines...!
like how to break them?
not the best teacher. but he needs one.
Andrew taught us all how to install a radio in a truck, from that day forward he's the only instructor I'll listen to lol!
I live vicariously through you and all the toys that you buy and work on.
😁
I’d love to own an old log truck with grapple loader. There’s a ton of them around me for sale that aren’t really “road worthy” but they’d be great yard trucks around a big property like yours.
Yeah, that would have been better for what I am doing here.
@@AndrewCamarata I’ve gotta move my 40’ shipping container on my property in a few days. I looked back to a few of your older videos to see how you’ve best moved them around. I had called a few places they all quoted me $1500-1800 to drag the thing 500ft. I can rent a D3 dozer for $425 a day I couldn’t believe those prices. Looks like I’ll be renting the dozer for a day. Thanks for all the videos!
@@AndrewCamarata except for the part of going up and down your mountain.
@@iffykidmn8170log trucks are meant for that
@@jrs4ex debes tener en cuenta los portes para llevarte la máquina. No obstante, creo que te seguiría rentable.
wow...love that machine, does not look like it has many hours on it...i have a forestry company here in nova scotia canada and every time I watch your videos it reminds me of the countryside here...good work, always look forward to the next video
Enjoyed the video Andrew your home looks amazing and the surroundings are stunning best wishes and warmest regards sp 🙏
Designed for short trips with BIG logs to reduce loading and unloading time I would think. Thanks for the aerial shots so nice to see all the green again.
Yeah. I’m kind of using it wrong.
Thanks for the reply.
Glad to see you still working Andrew awesome piece of equipment 😉 bless you and family and Friends.
That Boy I don't want to work. You made me happy just to see it work. Thanks for all that you do . Granny Oregon.
Mais uma máquina maluca! Que bom ver a Sam novamente por aqui…
Excellent video production Samantha!
I read somewhere that Andrew is not with Sam anymore ?
Thank you xD
To my understanding she prefers girls to boys and Andrew isn't a girl. I don't know why they bothered to be together in the first place ?
As always awesome content thanks for your time to do this video big fan of your channel
Just might be the most awesome piece of equipment you ever bought. Gotta love how the rear tires don't explode under weight of logs.
What a wonderful life you're hard work has provided!
every child that has had a Tonka toy is so envious of you it is just off the charts !!!!
I saw the forwarder on marketplace. Great video Andrew, as always.
Must have been spring/early summer. Sam with long hair. Nice to see her back in a video. Need to practice with the claw machine at the arcade. AC toys for the win!
I’m loving the video quality, it’s extremely clean and vivid.
That looks like a good clean machine. I hope the appearance hides no sins and that it works as well as you need it to work.
You alway amaze me with the iron you bring home. You do procure some Big Iron. I like your vids so thanks for sharing.
You are a natural Andrew. Your videos are informative, visually appealing and dare I say entertaining. Hollywood has it all wrong. Be a STORY teller. Nothing more. Nothing less. And so may I suggest if this excavating and heavy machinery gig should fail (I know, not likely), filmmaking can easily be your next venture. EVERY you tuber can take your videos as examples of how they should make video. If they did, I would once and for all kill my cable TV sub. Thank you Andrew, for giving so much of yourself.
Yep Andrew, that's a proud old JD. A real beauty. But I believe it might belong in the category of a couple proud old machines I've purchased over the years. Those are the ones my wife says, as she's walking away, "You can leave the keys in it. Nobody's going to steal it." That said, have fun in your old JD and your videos are fabulous!!!!
Looks like a waste of money on this one Andrew. So sorry you and Sam didn’t work out. You’re a great guy and a very hard worker. Just need to sell some of that old equipment and get a few in better shape. Great job Andrew!
Kinda surprised you bought that JD TimberJack - usually these are the machines you use when you don't have great roads, can't get excavators in/out quickly enough but they load slower than an excavator, they drive slower than a dump truck and can't dump the load (you have to pick off the bundles) but you need them when you need them in certain situations. They are not great at any one thing, but they can do it all - just painfully slowly. They have their place I guess. Curious to see how much you use this Andrew. Especially since you have all that other equipment and have multiple excavators so they could hypothetically work on both ends (load point and unload point). Either way, have fun with it. That's what toys are for !!!! Love your videos - keep them coming !!!!
Too bad you missed on the very first point, Tree Farmer not a TimberJack.😉
ye hell probably sell it soon if not already done, if then not loosing much money, and with some experiences richer, and fun and video etc i think i made my point
@@iffykidmn8170 This unit is actually a Timberjack/John Deere C50 ..... the green paint/yellow stripe, Deere logo and C50 designation indicate that quite clearly. Either way - It's really not important to the point I made anyways.🤣🤣🤣🤣🤣
@@ezm6153 Could very well be but it looks an awful lot like the Tree Farmer I ran back in the 80/90s , AC even refers to it as being the same in the description.🤔
@@ezm6153 there’s no such thing as a John Deere c50
this video shows why operators should make big bucks because a good operator that know the controls intuitively can increase productivity by many %'s
Those machines are pretty awesome i've seen them on another channel. They are very slow especially on a mountain that you have. I have seen them be used in a small residential area after the trees have been cut and they have smaller logs and not working on mountains
First thing I noticed, good tread on the tires!
You'll love this machine Andrew once you get used to those 5 operating levers.
Glad i saw this. I was thinking of getting a used forwarder/loader but i got a log trailer with loader to attach to any fast tractor. Its a lot larger and difficult to move in tight areas but in comparison it is a lot faster at loading. If a wheel loader could pull a trailer i'd just use that.
Suggestion 4 ya Andrew. Maybe make a hydraulic slid out axle rack on the back. That extends out 6 or 8 feet for those longer logs this would also help spread the load. Since the wheel base is so close together.👀 Plus a bigger radiator wouldn't hurt.🤔👍👍
usually just drag the longer logs no problem
I drive forwarders (mainly John Deere nowdays) for a living and must say that technology has advanced looong ways since these things were brand spanking new.😀
Thank God by the end of the video you put air in the back tires. It was driving me crazy😂
And dashboards in trucks drive Andrew crazy.
I couldn't stand it either.... I know how much those tires cost.....any he's overloaded too boot
I don’t blame you Andrew…. I instantly thought that thing was terribly slow. It’s probably nice when you don’t have roads and you are deep in the woods but even loading it seems slow too. But they do have their purpose when you can’t have extra equipment in the woods to load it. Good call on using the LMTV or even your haul truck.
Definitely need some dog go-pros. We need to see what these pups are doing when they wonder off into the lands
Man, I Love looking at the Terrain in your Videos! We have a friend near Syracuse so we get a peek of what its like there! Thanks!
I thought a 'log forwarder' was going to be American slang for 'toilet'. From now on it is for me! 😅🤣
Quit it, I just choked some wine out of my nose! Lol 😂
A machine obeys exactly when the commands are exact. Learning a machine's language is essential.
Hey Andrew
I'm pretty sure that the radiator cap is leaking, you might want to fix that, so the cooling works better.
Went to Olana Sunday. Beautiful.
I always enjoy these videos, but I sure do miss the "Here we are on another job..." days
I love how surprised he was when it started the first try
With the skidder and forwarder, all you need now is a logging truck and you've got a hobby logging company. 👍
Buy a double bunk trailer
And a feller buncher to take down the trees.
Next thing we know Andrew wil buy a feller/buncher to take down the trees efficently.
Get one of those automated processors that turns 8' logs into firewood, instant $$$$
I ABSOLUTELY can not believe that is how you steer that giant truck!!
Sorry it didn't work out for you and Sam. I love the video. Great work as usual xo
Did Andrew break up with his girlfriend? Was her Name Sam?
Good Engine in there.... been around a long time. All that gravel on the roads is Lookin Good!!
Boy Andrew, that’s a great piece of equipment! Always before, you would buy a heavy duty truck and install a boom on it.
That's a piece of home made junk. Not fit for purpose. Propwr timber cranes are so fast they would make the excavator look slow.
You must be used to some pretty awful machinery if you think this POS is great.
Impressive as always Andrew, love your toys and ability to trouble shoot them.
My man Andrew took the words of Beth Dutton to heart "DON'T LET ANYONE OUT WORK YOU, NEVER"
I would like to see Andrew as the new master mechanik of the Enterprise, explaining Mr Spok what a jet sky is.
Andrew I have been watching guys since September operate a very similar piece of equipment picking up hurricane debris, down here in Florida. It doesn't look easy. But I promise you will get faster.
Is Sam back to stay or is this just an old video,I really enjoy your videos Sam just adds an extra layer for me . I am anxiously awaiting the start of construction on the new castle, if I was 50 yrs younger I think I would move there to help and learn.
Andrew: "can I have a steering wheel?"
John Deere: "no"
ha
John Deere is not worried about customer service anymore.
It's not a Deere, C5D is a Tree Farmer,
Yes you can 👍😂
Nice profile photo lmfaoooo, hopefully hes a kind hearted gentleman with no hatred towards other races.
Top notch cinematography Andrew
The picker reminds me of the penny arcade claw game. This would be an awesome money making machine if you're on time and material contract.
Awesome content as always.Your work ethic is exceptional.Thanks for sharing and taking us along
I'm guessing the slow speed is just too keep you from ripping through the woods too fast. Need that tire aired up before it tears off the rim and gets damaged. Interesting video.
Only way to know is to check the pressure - some of those tires are designed to run pretty darn soft so they grip better - not sure on this specific equipment (or the tire rating) - but I saw that too - but just thought maybe it's supposed to be that soft.
As soon as I saw the shot of the forwarder coming up the hill with the 2 dogs laying down watching & waiting I thought that's the sort of framing Sam used to do.......!!!
Hi Andrew when loading your picker hauler always load the heavy end or big end of each log towards the front or will be riding Willey's all the time bud
I’ve been a subscriber for years and I love when I hit the comments my boy Andrew is still commenting back with people I’ll never forget the concrete apron video I said that ain’t holding up he comments said he will do a update video in a year and he did concrete wasn’t broken I’ve watched every video since
When Andrews hits the "Start" button on a piece of equipment, you know we're about to embark upon another adventure together....
I own one of these and its made by a different company, name is worn off but think it was a Kobelco... sounds like that name any how. It was made to go out in the woods and load logs to keep them out of the mud and rocks. It will travel over some terrain that is just unbelievable and still just come right out of bad ground. The biggest advantage of mine is it has the same controls as a excavator and so its not just one function on each lever. You have ran enough excavators to know what a advantage that is when you just plant your two hands on two levers or one in each hand. I did shorten the log stakes as its just way too top heavy and wants to roll a lot when on steep sidehills. I can still load just as fast if not faster than you can if they are regular logs an not bits and pieces of firewood. Like I said, if used in the brush where the tree fell at, then no rocks or mud to get into the chain or sawblade.
I’ve been waiting for this video! Always cool watching the machinery. It’s interesting how it all works.
Love the sound of an old Detroit motor! Don't care which one
Reminds me of those arcade machines full of stuffed toys that you can never grab to pick up.
Never watched this channel before, but it seems you have a pretty nice piece of equipment, just need to get a hydraulic controller that works for you. It's just hoses and handles. Change it up to little toggle buttons where they feel comfortable. Small price in the big picture maybe? That thing will still be running, when the $500K machines have broke down. Point is, keep that machine. Slow and steady never killed anyone.
Thank you , Andrew .
🐺
Can't wait to see the piece of machinery he buys next to move his entire mountain with. I'll be waiting
Me too Money, Well you can just about buy any toy you want Love it, Andrew says thanks UA-cam and subscribers.😂
@Wayne Rogers He definitely deserves it. Dude is a fuckin bull of a worker.
tunnel boring machine... maybe not a brand new one yet
Yeah, I'm waiting for Andrew to buy an earthmover..
You don't need anything to move mountains. They move them selfs. It's just a result of tectonic plates moving around. Wait a bilion years top and you're good. Job is done
Pretty fancy name for a logging tractor/truck.
My Terramite backhoe/loader has the old school six stick config for the backhoe controls like that skidded. It does take some getting used to. I thought about changing it out to dual wobble sticks, but now I don't even look at the sticks when using it.
He's doing well buying all that equipment
Nice old tree farmer. My uncle has one just like that one
Treefarmer skidder converted into a forwarder with John Deere paint and a screamin’ jimmy for “power”… Frankenstein piece of equipment.
@@Bulldog532 Sounds like you know your equipment!
@@Bulldog532 An extended log bunk does not make it a forwarder, I ran one of these back in the mid 80s early 90s as well as Franklin, Iron Mule and Timberjack.
@@Bulldog532 How do you know it ws converted from a skidder? If that was so it would be geared higher, a skidder couldnt be that slow
Looks like that footage was captured at a much more pleasant time of the year than the present state of affairs. The green was pleasant.
at this rate Andrew is going to have his own logging and gravel company and I love it
You might wanna convert this grandpa to joystick, it'll make night and day difference. And the Engine might need some love too as it seems.
I'm not so sure about that log forwarder. Seems Andrew has other equipment that'll do the same job a lot quicker.
Might make good yard art.
Buy it, try it, break it, fix it, sell it.
A forwarder is great if you have long pulls with the skidders, but on short pulls a skidder is faster. We use the skidders to pull the logs to a landing then the forwarder loads there and hauls out to the truck loading site if the pulls are long. And with a little practice you can get just as fast operating it as you can with joysticks.
the skidded is faster if he chokes 10 trees to it at a time.
@@BruceBoschek 👍at a $$ loss
@@jasonh4167 I guess that is not a factor.