SSL Big Six Part 1 Channel Routing In Your Daw. Setting it up.
Вставка
- Опубліковано 24 сер 2024
- Routing for the SSL Big Six. Working out how to route all the 16 channels Part 1.
For Part 2
• SSL Big Six Part 2 Cha...
For Part 3
• SSL Big Six Part 3 Cha...
Check out my website for more info. on Drum Base, many thanks.
www.drumbase.c...
Song Featured
• Video
great video. More like this please.
More ssl big six videos please
Hey Alex - hope you are well. I was looking for your short video which explains how you get audio from your computer playing through the SSL. I have had a few people ask me so I wanted to refer them to that. Cheers. I will email you about our next session - soon. Kent
Found it in part 2 😂
@@kents2908 HI, okay cool speak soon.
This video is great for Cubase users and using external reverb into the DAW. (I use Logic) But I have another request that involves external effects, might not necessarily involve DAW, but could. How can I connect external reverb so I can use it through CUE 1 or 2 on each channel for recording or summing? The only video out there shows audio coming out from ST Cue1 at back of the board to reverb input, then reverb out to external 1 inputs (13/14?) at top of B6 - no buttons pushed, but I get feedback that way. So this can't be correct. What am I missing?
Are there alternatives for hearing through mains or headphones or recording or summing to and from the DAW the right way? Thank you
Or how about just an explanation of how this works from you or somebody else? I'm most likely not the only one who has a question about this. And thank you in advance.
@@cliveparkes522 Hi, I shall ask a friend who is doing this so I can be sure to get it right. He has logic. I'll let you know when I
ask him.
@@Drumbaseuk
okay, thank you.
Okay, for anyone who has run into the same misunderstanding, here we go with send and return of effects using an outboard reverb unit as a for instance: It's pretty basic and we're not even involving DAW. Let me know if I'm missing anything.
Out R&L from ST Cue (back panel of Big Six) into any R&L outboard stereo reverb unit. Then out from R&L reverb unit into EXT. Inputs on the very top right panel of Big Six. Then turn up the pot level for Cue 1 in the "Monitor Source" section on the Monitor panel. (top right on Big Six), and push the EXT 1 button (13/14) on the Main panel section. That's it. Now you can go to any channel strip, turn on ST Cue 1, and use the db levelling pot to vary the amount of reverb you need for any channel.