Fairmont 7 - check valves and drill block dont call the cops
Вставка
- Опубліковано 30 вер 2024
- I MISSED LIKE 2 MINUTES OF THIS VIDEO WHEN I EXPORTED IT
someone call the cops
BEARINGGGGGG
a.co/d/5KtGegd
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
www.sloppymech...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarag...)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeater...)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertune...
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-moto...
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperforma...)
Hughes Performance - (www.hughesperfo...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)
I feel like we have been here before.
Even though i watched it last night im still gonna watch the reupload lol
there is new hidden giblets
@@SloppyMechanics Nothing better then that 1 tap.
Man DRIVES metal into FRESH engine you won’t believe what happens next WTF
Slick trick on the DOD delete. Kudo's.
Eyyyyyy
Blast air into that exhaust port and watch for bubbles
The things people think of! 😂👍
One the street, 706/862 heads should be on every LS, I wouldn't hesitate to run them on a 6.2, the 78/75, S475/480/488 is going to present the power ceiling along with the fuel system as long as you are using Ethanol. Cam doesn't matter much, might as well go huge and go with an intake that kills some tq if you're not using a TBSS...get wacky out there...3 455 pumps, 160 or 210lb injectors.
I guess you could say it’s hammer time
Who knew it was the crickets mating call?
I’m phoning the police
I'm dumb. What's the extra tapped hole for? Did you align it with the bracket while the head was still on?
🦗🦝
4th Gen Alternator bracket is geat for aligning where to drill the hole
I would have put some red loctite on those pins
Where are they going to go?
Through the aluminum plate I guess
@@MrJakethehouse I don't know. To be completely honest I know nothing of the LS. It was just a thought
@@SloppyMechanics lol. I'm a LS dummy my friend. I didn't know. Sorry about that
Next time use mineral spirits instead of water. It's thinner than water and has less surface tension, which allows it to leak past smaller imperfections than water.
I had the same thought
of even brake clean
@@jsomething2that would probably evaporate pretty quick tho?
@@grabasandwich only gotta see it wet on the other side.
I actually set the head upright on something, spray in the ports and let it soak for a bit. if that doesn't leak thru, nothing will.
I use gas
Why put the plugs in, when the stock LY6 cover already blocks them off with o-rings?
Hey Matt looks like my garage. Lol
With 3 kia souls. Motor issues of course
Planning to look at the old block at all to see if it's damaged somewhere or just heading into the future with your hair on fair and the mirrors torn off?
would this sorcery work on aluminium?
Beautiful
If you have the valley cover with the o rings why do you need the plugs ?
just below flush then peen the edge inward.
I ordered a bearing off eBay after your first upload :D
How much was it?
@@riddler983 $14 shipped
What do you do about the LS3 chamber being wider than the bore of the block. The air coming into the chamber then hitting the ledge of the bore on the 4 inchbore is not good. I bevel the block but it would be better to jog the head about 0.35.what do you say.
You do nothing. Those heads were assembled to the LY6 block from the factory.
Sloppy Mechanics aren't fixated about insignificant things.
@@1stamendmentsupporter a mismatch between the chamber and cylinder on the chamber side is insignificant. That could cause the 3/8 inch boil at high lift
Whoop Whoop!
been doing the bearing trick for years
Keeping secrets
Why do you plug those holes if the cover has o-rings?
There is still potential of a slight pressure drop using only the orings
@@Rhett.Castillo It's a precision o-ring seal, it shouldn't leak at 50-100PSI unless the o-rings are wasted.
@@gedavids84 I've personally experienced then leaking. Especially if the surface has a ding or scratch.
@@Rhett.CastilloThere is also the potential of leaving all manner of stress in the block by hammering steel wedges into it.
@@johnnicol8598 We've been press fitting dowels into cast iron for centuries and rarely is there ever an use. Judging by the size of the hammer and the amount of swing, he's not going to hurt anything.