DIY Arduno based Stroboscope
Вставка
- Опубліковано 7 жов 2024
- Best & fast PCB supplier ($2 for 10 boards): jlcpcb.com
Hello friends in this video we will see how to make Stroboscope using arduino.
Stroboscope an instrument for studying periodic motion or determining speeds of rotation by shining a bright light at intervals so that a moving or rotating object appears stationary.
Item required :-
Arduino Nano :- amzn.to/2NyDX4u
0.96" OLED Display :- amzn.to/2NDva11
10W LED :- amzn.to/2NCZdFW
10K POT :- amzn.to/2x81M8W
Toggle S/W :- amzn.to/2NafZ05
2222A Transistor :- amzn.to/2QojE8b
Code and circuit :-
easyeda.com/ed...
www.mediafire.c...
💻visit for more projects :-
👉electricdiylab....
👉FB page :- / innovativemr This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects +91 7600079068 - Наука та технологія
Hi Mr Inno, in this strobo led its possible input signal from spark coil motorcycle for setting timing dead point ? Inductive signal from spark cable with 5,6 turn wire?
Thanks
Thankyou verry unch 😁
Sir please make video mach 3 software and Mach 3 control
Excellent project
Denied permission for the easyeda files.
circuit link is not working
pls edit that
The circuit diagram is wrong too, i guess because i tried it without the PCB and directly making the connection on breadboard, the LED light is just glowing and is not at all flickering. Anyone who has got a solution or so? Each and every help appreciated
yeah me too... in me the LED is not blinking. any help?
Your link to "Code and circuit"
The EasyEDA link gives "Permission denied"
The mediafire link seems to be all advertising. I couldn't find any code there.
can this be used with say a 26650 battery, 3.7volt , or can you find a way to make it so
Could you please make dlp 3d printer?
maybe a 10k-pot is a good idea for a rough dial in, an additional digital plus/minus would be handy for a dial in on very fine situations.
overall : a good idea 🙋
There are lot of things missing in your video, man. Show the entire connection please. Where have you connected the dc power jack? Also how much voltage battery are you using? Please atleast reply if you want to help someone
It will work on 9V dc
It will work on 9V dc
very nice
What kind of cardboard are you using? How to glue This?
Its sunboard sheets
Your code is not working
Excellent bhai
why jlc pcb is good ?
In Chinese idioms good things not cheap
Can you give me a project for Professional high brightness LED stroboscope project.
Engine timing light
there are many steps which arent unterstandable. like why you need a transistor, how you connected everything and how you programmed the arduino( yea there is an "i" in arduino..). Furthermore is the amount of flashes measured in Hertz not in rpm, the strobelight does not rotate and its ineffiecient to count by minutes... if somebody wants to know how to build a strobe, he just learned what parts might be useful for building one and where to create a pcb. but there was no benefiting logical explaination of what you did...
I understand what you are saying but this tool is not measuring the hz of the flash, it is measuring the rpm of whatever rotating object you point it at. and so most commercial stroboscopes are designed and sold to measure the rpm of spinning objects, the strobe adjustment dial is labeled in "rpm" even on the commercially sold units.
Access denied on easyeda.com give other link please
Can i get 1 board
Wow, some haters on this video. I thought it was pretty good!
super brother
compile error noticed in the follwing lines,
00
.
1141,,j ,
//., m[p
0.....
00000
.444444444444444
error is : expected unqualified-id before numeric constant. kindly guide me thank you. Iam from tamilnadu india
code compile error noticed
☺☺☺☺
Na Luca wie gehts
order pcb with minimal circuit lol
?????????????
Have u lost your mind why the hell are u ordering a pcb for such a simple circuit