Hey everyone! Here are the products talked about in the video: -Metra 99-5832G Single/Double Din Dash Combo Kit for Select Ford Transit 2015-Up (www.amazon.com/dp/B01NGUEJD9?ref=exp_weldtecdesigns_dp_vv_d) -Pioneer DMH-1500NEX Digital Media Receiver with 7" WVGA Display, Apple CarPlay, Android Auto, Built in Bluetooth (www.amazon.com/dp/B07PMXN6JH?ref=exp_weldtecdesigns_dp_vv_d) (Also we used adapters to connect to the stock wiring) This is included in our Transit Takeover section of our Amazon Shop: www.amazon.com/shop/weldtecdesigns
iDatalink HRN-HRR-FO2 iDatalink Maestro RR or MMR2 Both of those should restore back up camera functionality and add to it from what I have been able to find.
I did a 2018 transit. Was able to keep the backup camera but now on a 7 inch screen with CD player player. Ordered from Crutchfield. Wiring Wiring harnesses even maintain steering wheel controls. Getting the "Metra " dash kit to fit perfectly took much trial and error using a combination of the factory clips and the ones provided by Metra. Well worth the effort! It looks factory installed!
@@Veevslav1 thanks for responding to my comment. I hope what I've been able to locate about my order will help you. My transit had a factory CD player and the small 4in backup camera. The camera was recessed about a foot back from the front of the dash and extremely difficult to see. I discussed my needs with Rex and Ronald and they told me what I would need. I ordered a Kenwood DDX57S receiver, Metra dash kit, steering wheel controls, backup camera wiring harness and I think a couple other wiring harnesses. There are some less expensive options if you don't want or need the CD player. Wish I could send you a picture of the final install. Be patient and take your time. Crutchfield reps were helpful but you still have to figure somethings out on your own! Hope this helps. Please text if there is anything else you need.
That would be the whole idea for doing this is so i would have a bigger screen for my factory backup camera that came on my 2015 Transit 150 cargo van. The screen that came on the van is probably 2 and one half inches as i am getting older it's getting harder to see the little screen when I am backing up.
Mine fits perfectly! But it does take a mix of factory clips and the ones Metra provide. Trial and error but worth it for a really factory look and finish!
If you look at the back of the unit (picture on Amazon website), the upper right A/V input is exclusively for the backup camera. Soooo, not sure what happened there.
Hey Alex, Thank you for the feedback. I agree and we are in the works with getting that going with our videos. Our new website also will be debuting hopefully soon, so it will be much easier to navigate as well. If you have any questions, feel free to email us at info@weldtecdesigns.com and a sales rep will be happy to assist!
@@AVR-hf1rl I don't know? I'm an old geezer and don't even have a computer. I'm a dummy trying to use my smartphone! I think you could send me an email address and we could communicate from there? I realize that would expose your email address to whomever. But think of something?
Did you guys have issues getting power to the new stereo with the harness. I have a 2017 Ford transit xlt 150 and having no luck getting power to the new unit. The original does, the new one does in another vehicle... but nothing when I get everything put together into the van. I have two different harnesses. The “metro XSVI 5524” and “70-5524”. But no power. Any words of advice? Thanks :)
I’m assuming by now you’ve found an answer to your question. But I used a underneath the cupholder that goes to the back up lights. It’s supplies the module with 12v when the key is on.
Hey everyone! Here are the products talked about in the video:
-Metra 99-5832G Single/Double Din Dash Combo Kit for Select Ford Transit 2015-Up (www.amazon.com/dp/B01NGUEJD9?ref=exp_weldtecdesigns_dp_vv_d)
-Pioneer DMH-1500NEX Digital Media Receiver with 7" WVGA Display, Apple CarPlay, Android Auto, Built in Bluetooth (www.amazon.com/dp/B07PMXN6JH?ref=exp_weldtecdesigns_dp_vv_d)
(Also we used adapters to connect to the stock wiring)
This is included in our Transit Takeover section of our Amazon Shop: www.amazon.com/shop/weldtecdesigns
iDatalink HRN-HRR-FO2
iDatalink Maestro RR or MMR2
Both of those should restore back up camera functionality and add to it from what I have been able to find.
I did a 2018 transit. Was able to keep the backup camera but now on a 7 inch screen with CD player player. Ordered from Crutchfield. Wiring Wiring harnesses even maintain steering wheel controls.
Getting the "Metra " dash kit to fit perfectly took much trial and error using a combination of the factory clips and the ones provided by Metra. Well worth the effort! It looks factory installed!
What did you order from Crutchfield? Got a model number or something else to help identify it? Thanks in advance.
@@Veevslav1 thanks for responding to my comment. I hope what I've been able to locate about my order will help you.
My transit had a factory CD player and the small 4in backup camera. The camera was recessed about a foot back from the front of the dash and extremely difficult to see.
I discussed my needs with Rex and Ronald and they told me what I would need.
I ordered a Kenwood DDX57S receiver, Metra dash kit, steering wheel controls, backup camera wiring harness and I think a couple other wiring harnesses.
There are some less expensive options if you don't want or need the CD player.
Wish I could send you a picture of the final install.
Be patient and take your time.
Crutchfield reps were helpful but you still have to figure somethings out on your own!
Hope this helps. Please text if there is anything else you need.
@@chrisdevalcourt648 Thank you for the response. I will take the time to research it out. ;)
That would be the whole idea for doing this is so i would have a bigger screen for my factory backup camera that came on my 2015 Transit 150 cargo van. The screen that came on the van is probably 2 and one half inches as i am getting older it's getting harder to see the little screen when I am backing up.
Put some mounting tape under panel where the tab doesn't fit.
Mine fits perfectly! But it does take a mix of factory clips and the ones Metra provide. Trial and error but worth it for a really factory look and finish!
How can u sacrifice the rear camera????
Rear camera should work with the Pioneer
If you look at the back of the unit (picture on Amazon website), the upper right A/V input is exclusively for the backup camera. Soooo, not sure what happened there.
Can you please put the links in the comments/ description for all the parts. Struggling to find them onljne
Hey Alex,
Thank you for the feedback. I agree and we are in the works with getting that going with our videos. Our new website also will be debuting hopefully soon, so it will be much easier to navigate as well. If you have any questions, feel free to email us at info@weldtecdesigns.com and a sales rep will be happy to assist!
We posted and pinned the comment, hopefully this helps!
Wow really nailed that lol
This is a big help. Now I can do it to mine!
Let us know how it goes.
Do you still have steering control? Thanks
What do you mean?
@@WeldtecDesigns I think he's wondering if the steering wheel radio and phone inputs work with this, too.
What did you do with the old stereo dod you want to sell it ?
AVR still need a Ford radio?
I have one from my 2018 transit with CD and Sirius.
Would be glad to let it be recycled NC!
@@chrisdevalcourt648 yes please
@@chrisdevalcourt648 How do we get in contact off line ?
@@AVR-hf1rl I don't know?
I'm an old geezer and don't even have a computer.
I'm a dummy trying to use my smartphone!
I think you could send me an email address and we could communicate from there?
I realize that would expose your email address to whomever. But think of something?
Any idea if this still works with the 2022 models
I dont know? Sorry
When is the lift coming??! 🤓
Oh..... so close..... I need it also....
Did you guys have issues getting power to the new stereo with the harness. I have a 2017 Ford transit xlt 150 and having no luck getting power to the new unit. The original does, the new one does in another vehicle... but nothing when I get everything put together into the van. I have two different harnesses. The “metro XSVI 5524” and “70-5524”.
But no power. Any words of advice? Thanks :)
I’m assuming by now you’ve found an answer to your question. But I used a underneath the cupholder that goes to the back up lights. It’s supplies the module with 12v when the key is on.
Let's be real here. It is your vehicle now..
No..... I have a new chevrolet to build for me....lol
@@jeremyjohnson8361 Lets see that sucker!! Lol
not very helpful for us guys trying to install stereos in our Transits.
Why clutter up YT?
Useless video.
fast forwarded through the only part I cared about out