DINOVA BOSS MIX - Unboxing and Installation

Step-by-step unboxing and installation of the Televes DINOVA BOSS MIX antenna (P/N 144286).
The DINOVA BOSS MIX is an state of the art metro/suburban range over the air TV antenna that automatically adapts its gain in real time to optimize the reception of television signals, ensuring the optimum level of signal is delivered at all times.
Its modern design and low visual impact make it perfect for locations where aesthetics play an important role.
INSTALLATION
🔸Unboxing ➡️ 0:09
🔸Antenna pointing ➡️ 01:26
• Do you know where to point your antenna? 🎞️ Watch the following video to learn how to properly point your antenna • How To Locate Free OTA...
🔸Antenna installation ➡️ 1:32
1️⃣ Installing the mount ➡️ 1:38
Alternatively, the Dinova can be installed on any other suitable mount such as a mast, balcony railing, or similar.
2️⃣ Installing the antenna ➡️ 2:10
The antenna clamp has two perpendicular slots, one for horizontal polarization and the other for vertical polarization. TV signals in the US are horizontally polarized, so typically the antenna should be installed in the horizontal position as shown in the video.
3️⃣ Prepare the coaxial cable and connect to the antenna ➡️ 3:00
*The supplied twist-on coax connector and weather boot are convenience items for customers not equipped with the knowledge and tools to install professional self-sealing coax connectors that require a cable stripper and coax connector crimping tool for proper installation. Some customers may also choose to purchase long lengths of coax cable with connectors pre-installed.
Regardless of the choice make sure the connector is properly prepared and protected from moisture ingress.*
4️⃣If there are any VHF channels available in your market (RF7-RF13) extend the metal elements for increased VHF reception ➡️ 3:54
💡 EXTRA
• Power the antenna ➡️ 4:08
🎞️ Watch the following video to learn how to connect the power supply • Power supply connection
• Scan channels on your TV ➡️ 4:16
🎞️ Watch the following video to learn how to scan the channels in your TV • How to scan channels o...
Subscribe to our channel: en.televes.com/....
Follow us on our social networks:
Facebook: / televesofficial
Twitter: / televesofficial
Linkedin: / televes

[@razzeldazzel6301]

I purchased this antenna and it is fantastic. I currently have the antenna on top of a side table next to my TV, I live in an apartment so I can't install the antenna outside. Do you have any suggestions on how to install indoors even if I have to buy additional equipment because the supplied pole and screws required to drill into the walls are just too big for indoors.

[@TelevesCorporation]

The DINOVA BOSS antenna has no problem to be installed indoors, that if you will need a wall mount bracket, (for example reference 7393).
Another option, as long as you have good DTT signal reception in your apartment, is to purchase one of the indoor antenna models that Televes has available; BEXIA, MIRA BOSS, or INNOVA BOSS.
I advise you to take a look at www.televes.com website to see the features of each of these antennas and see if it fits your needs.
Sincerely from the Televés technical department

[@joe10117]

not showing us the full scan

[@TelevesCorporation]

You can view the channels full scan in the following video:ua-cam.com/video/g6rwzKuS1DM/v-deo.html

[@robertogalindodelafuente4503]

🏛️🏆🇪🇦👑🎄⛪☃️🌌🌠🛸👽