I'm actually building this kit now and the stickers on this thing are the worst. I got the two red and yellow stickers for the shoulders stuck together trying to get them off the sheet, so I had to toss em since I couldn't separate them, and then I Lost one of the tiny stickers that go on the shoulder because they're so damn small, so now no matter what my kid is going to look wrong when I put it together 🫠
Not really. I panel line over bare plastic all the time and I've only had one piece break on me in 40+ kits. You only really have to worry about the plastic cracking when the fluid seeps into the gap between 2 pieces. The solvent within the panel liner can't evaporate, seeps into the plastic and weakens it. In my case, I forgot to cement the 2 upper arm pieces for the HG Beguir-Beu and it went into the gap. It all worked out in the end though since the part that broke was fixed and sanded to perfection.
I wish I could like this kit more but the wonky proportions kinda make it hard to get him into good poses. And because of the weird way the feet are built with the ankle being on a free hinge with the toe and heel being on swivels, proper balance is kind of a chore unless you have a compatible stand.
Thanks for the insight! I am interested in buying mr weathering color gray. But where did you apply the gray weathering color? Sorry in the video I only saw you applying black panel line (enamel)
Yeah you need to wait until the panel lner dry first around 5-8 minutes depend on what kind of panel liner you use..(tamiya - 5 minutes its enough) (mr hobby - 10 minutes)
Hello, just started panel lining and would want to know what is better between felt tip markers and pour types? Currently using marker since I am a bit afraid about the plastic eating problem hahaha
Hi bro😊it just depends on our use as a builder/modeller.. it doesn't matter if it's a marker or a pour type panel line..both have advantages and disadvantages..first of all markers are good for lines or detailing that have large gaps but it is very difficult for small detailing..for pour type it is very good for small and many detail spaces on the surface..talking about it can damage the plastic, it's actually not that worrying as long as we use it correctly and don't spill a lot on the plastic surface
@@reygunplamy Noted, will buy a pour type and will test it on a bootleg model for practice just to keep it safe still 😅 Thank you very much, good job on your kit btw!
Ig you could try using less of the enamel thinner/ lighter fluid/ cleaning solution, have it just damp enough to remove excess, but not so wet it seeps into the panel lines themselves
Question; After putting the water slide decal and setter. Can i just use a gundam marker topcoat to just put top coat on the area where the decal is or do I need to topcoat the whole kit?
@@reygunplamythank you very much. I love the plastic look of the MG Delta Plus. I'm just scared that if I topcoat the whole kit the colors might get dull.
@@loiedonn4192 if you using matt(marker)yes it might be unblance..but if you using spray can or airbrush it will be nice..or maybe you can try with brush if you use the tc marker..I’ve tried it before with mr hobby matt top coat marker but with hand brush coz if I apply it directly from the marker nib it look unbalance
@@reygunplamy Do you topcoat before panel lining? or only after? I hear mixed things. and what was the mr marker or whatever you used before applying the slide stickers?
Amazing work. I’m fairly new to this and about to do my first build with water slide decals. How necessary is the mark setter and mark softer? I haven’t used water slide decals in over 35 years and I just remember using water and having terrible results.
Third party decals like Delpi stick pretty well without setter in my experience, but doesn’t hurt to have. Softer works really well for decals going around curves or into recessed areas, and that’s something you apply only once you’re satisfied with decal placement because it will practically melt your decal in place 😅
Wont that panel liner make the plastic weak and break? Its supposed to applied over clear coat...even if you clear coated yoy scribed it out of lines. Arent you skipping a step and teacjing oeople wrong?
1.Am I teach/show wrong step in the video? - no..I’m not teaching or showing anything wrong in this video..I’m just showing my own process in panel lining & applying a decal for the model kit and carefully doing the process without any damage 2.Is the panel liner will damage the plastic? - it won’t damage the plastic if you do it carefully(even the model kit still doin just fine until today😊..no crack no damage at all) 3.should we apply clear coat before apply the panel liner? - we can apply it you want to avoid the crack(if you are the type of person who works with smudges or you afraid if the plastic will crack)
![[UA] Team Vitality проти NAVI | IEM Cologne 2024](http://i.ytimg.com/vi/wttO1zVRTC0/mqdefault.jpg)
![How to Prep Your Gunpla: Removing Nub Marks and Other Surface Imperfections [Tutorial]](/img/n.gif)
Bruh those poses 😭
Not the "oneeeee-chan!" Pose with the shield bruh 😂😂😂😂
“Sparkles in Japan” 🎶
You did an amazing job on Eri. She looks really good.
You made me realize I have a lot of work to do
This is probably one of my favorite gundam besides the freedom. This kit looks awesome
the last pose💀 also nice job its very cool
That looks beautiful
Thank you bro❤️🔥🙏🏻
That sassy pose at the end lol 😂
Looks so so good
Great work
Thank you bro🙏🏻
Yes! Someone who also uses black panel lining on white pieces !
I'm actually building this kit now and the stickers on this thing are the worst. I got the two red and yellow stickers for the shoulders stuck together trying to get them off the sheet, so I had to toss em since I couldn't separate them, and then I Lost one of the tiny stickers that go on the shoulder because they're so damn small, so now no matter what my kid is going to look wrong when I put it together 🫠
Song name please? also AMAZING work
Yoasobi - The Blessing😊btw thanks bro🙏🏻
@@reygunplamy祝福な？英語で祝福ってこういうの？
Omedetou
Its the ending song in the anime “Gundam Witch from mercury”
@@SergiOrtizand the intro
Do you top coat before you panel line? I heard it will make plastics brittle
Yes🙏🏻
Not really. I panel line over bare plastic all the time and I've only had one piece break on me in 40+ kits. You only really have to worry about the plastic cracking when the fluid seeps into the gap between 2 pieces. The solvent within the panel liner can't evaporate, seeps into the plastic and weakens it. In my case, I forgot to cement the 2 upper arm pieces for the HG Beguir-Beu and it went into the gap. It all worked out in the end though since the part that broke was fixed and sanded to perfection.
@@leondong5037yes in fact I panel on the runner so I'm sure there are no gaps between two pieces 😂
@@reygunplamyWhy don't you show it when u used the top coat???
@@MrGonjack i do recorded it but I don’t put it in the timeline due to the long duration so I cutted it out🙏🏻
I wish I could like this kit more but the wonky proportions kinda make it hard to get him into good poses. And because of the weird way the feet are built with the ankle being on a free hinge with the toe and heel being on swivels, proper balance is kind of a chore unless you have a compatible stand.
Damn u are doing go nice
Thanks a lot bro🙏🏻❤️
Clean
beautiful! ❤
Thank you❤️🙏🏻
Nice keep it up and btw what tool to use to fill the gap of you're gunpla
Tutorial pleaseee
Thanks for the insight! I am interested in buying mr weathering color gray. But where did you apply the gray weathering color? Sorry in the video I only saw you applying black panel line (enamel)
Should I let dry the panel liner first before Erasing the excess? Or erase it right away? I'M new at building Gunplas
Yeah you need to wait until the panel lner dry first around 5-8 minutes depend on what kind of panel liner you use..(tamiya - 5 minutes its enough) (mr hobby - 10 minutes)
I am of the same opinion on the way the story will be similar to Kingdom Come
Also 16:10 jumpscare
Hello, just started panel lining and would want to know what is better between felt tip markers and pour types? Currently using marker since I am a bit afraid about the plastic eating problem hahaha
Hi bro😊it just depends on our use as a builder/modeller.. it doesn't matter if it's a marker or a pour type panel line..both have advantages and disadvantages..first of all markers are good for lines or detailing that have large gaps but it is very difficult for small detailing..for pour type it is very good for small and many detail spaces on the surface..talking about it can damage the plastic, it's actually not that worrying as long as we use it correctly and don't spill a lot on the plastic surface
@@reygunplamy Noted, will buy a pour type and will test it on a bootleg model for practice just to keep it safe still 😅 Thank you very much, good job on your kit btw!
Does anyone here not panel line their gunpla or is it just me
I just hate how the slightest fall will break it
Wow, amazing! Did you scribe the model before you put the topcoat?
My twitchy hands can't
Scribing is the key it seems, otherwise it just wipes off the panel line
Looking great! might you have the link for the musix you used? cuz its great too!
becarefull,you can crack parts if apply accent without coating before
How the hell do you get those panel lines so clean??? mine is never that dark, and at it’s darkest it brightens when I try cleaning it
Ig you could try using less of the enamel thinner/ lighter fluid/ cleaning solution, have it just damp enough to remove excess, but not so wet it seeps into the panel lines themselves
What width chisels do you use for going over preexisting panel lines? And what range of chisel sizes do you usually use for 144 and 100 scale?
I’m using 0.1-0.8mm 😊🙏🏻
Question;
After putting the water slide decal and setter.
Can i just use a gundam marker topcoat to just put top coat on the area where the decal is or do I need to topcoat the whole kit?
@@loiedonn4192 yes you can..but it’s much better if you topcoat the whole kit for balance look..coz top coat will change the model kit tone
@@reygunplamythank you very much.
I love the plastic look of the MG Delta Plus.
I'm just scared that if I topcoat the whole kit the colors might get dull.
@@loiedonn4192 if you using matt(marker)yes it might be unblance..but if you using spray can or airbrush it will be nice..or maybe you can try with brush if you use the tc marker..I’ve tried it before with mr hobby matt top coat marker but with hand brush coz if I apply it directly from the marker nib it look unbalance
@@reygunplamy nice.
Thanks for the tip.
Will surely try the brush option.
Thank you.
Need a video showing how to use setter.
Does the liquid you use to remove the excess ink residue in the panel lines leave an odor?
The liquid doesn’t leave any odor at all😊
Awesome build, did you use top coating, if you do what type, gloss or matte?
Yeah I’m using Gx114 super smooth clear matte from mr hobby😊btw thank you bro❤️🙏🏻
@@reygunplamy super nice bro 👍🏼
@@reygunplamy Do you topcoat before panel lining? or only after? I hear mixed things. and what was the mr marker or whatever you used before applying the slide stickers?
@@christopherrubino3614 before plining I’ll gloss top coat due to enamel affect the plastic surface bcome brittle..and then matte tc after😊
Amazing work. I’m fairly new to this and about to do my first build with water slide decals. How necessary is the mark setter and mark softer? I haven’t used water slide decals in over 35 years and I just remember using water and having terrible results.
Third party decals like Delpi stick pretty well without setter in my experience, but doesn’t hurt to have. Softer works really well for decals going around curves or into recessed areas, and that’s something you apply only once you’re satisfied with decal placement because it will practically melt your decal in place 😅
Do you base coat before panel lining?
Aerial the ☕ gundam😅😅
What liquid do u use to clean up the panel line stains?
Im using Mr Hobby Mr Weathering Solvent😊
👍
Did you top coat it before using tamiya panel liner?
berapa lama lepas panel line baru boleh apply decal and berapa lama lepas siap decal baru boleh apply top coat? please answer🥹
Panel line kering dlm 5-10 minit dh btl2 kering - tamiya 10-15 utk mr weathering color..utk water decal tggu dlm 5-8-10 mnt dh ble apply tc dh😊
@@reygunplamy thank you so much!! almost 3 weeks lepas start Gunpla and persoalan ni baru terjawab🥹🙏🏻thank you so much really appreciate this❤️🔥
Gundam earil mercury
What top coat do you use before panel lining? Planning on getting this kit but scared of Tamiya panel lining making the plastic brittle
Semi gloss tc
@@reygunplamy Ty!
@@user-ue1le7fh8n 🙌🏻🙌🏻🙌🏻🙌🏻
How do you wash exesses off?
かっちょえ～！欲しい～。
Is this top coated before panel lined using tamiya ?
Tamiya panel liner over bare plastic?
I was applied semi gloss tc before apply the tamiya pl😊🙏🏻
What did you use for rescribing panel line?
Do you topcoat before assembling or after?
Halo bang ray bang ada buat topcoat before panel line?
No britteling???
Nope😊
What were you putting on it to clean up after the panel lining?
What's the grey marker thing for???
nak panel line ni macam mana ya... saya beginner tak tahu cara nak guna panel line dengan top coating
mata scribber tu berapa ya sesuai
Yg sya pakai kat video ialah 0.01mm genk😊tp utk scribing depend dgn permukaan part dan cara kita buat..kita ble pkai dr 0.01mm - 1mm
Yo ,can I ask why my x-20A thinner isn't erasing the messy panel lines?
Nice job
Hello, may i ask what you used for panel line? Is that a scriber? What's the specifications? Thanks!
Its 0.2mm Ustar scriber ❤️🔥
@@reygunplamy thank you so much!
Wont that panel liner make the plastic weak and break? Its supposed to applied over clear coat...even if you clear coated yoy scribed it out of lines. Arent you skipping a step and teacjing oeople wrong?
1.Am I teach/show wrong step in the video? - no..I’m not teaching or showing anything wrong in this video..I’m just showing my own process in panel lining & applying a decal for the model kit and carefully doing the process without any damage
2.Is the panel liner will damage the plastic? - it won’t damage the plastic if you do it carefully(even the model kit still doin just fine until today😊..no crack no damage at all)
3.should we apply clear coat before apply the panel liner? - we can apply it you want to avoid the crack(if you are the type of person who works with smudges or you afraid if the plastic will crack)
What silver marker did you use and what did you use it for??
It’s Dspaie Gun Metal marker and I’m using it for colored on the parts
Are you using a dry qtip to erase?
How do you cleanup the lines without totally removing them?
Is it master grade
It’s actually Full Mechanics but the size is same as mg which is 1/100 scale😊
水星魔女
How to make shadow lining
What color thinner did u use???
Usually I’m using mr hobby😊
Is that dspiae grey marker?
It’s gun metal dspaie marker😊🙏🏻
What decal did you use and where can you get them?
It’s fm aerial wd from evolution studio 😊
Was that action base 2 stand? The red one?
That’s actually from my mg Astray red frame stand base😊
@@reygunplamyincluded with the kit?
@@SergiOrtiz actually that stand is from MG Astray Red Frame
I panel line with a thin sharpie is that bad? I really wanna know cuz I’m worried it ruins it
Do you have a link for the piano cover for The Blessing?
It’s from Ru’s piano❤️🔥
ua-cam.com/video/N3wdDiraq4g/v-deo.htmlsi=ogQhvKTwde0MHpxt
@@reygunplamy thanks!
what top coat do you use?
Mr color gx 114 super smooth clear🙏🏻😊
@@reygunplamy you painted it onto it?
Part tangan pakai apa ya?
Yoooooooo
Tutorial?
What song is this? It sounds familiar, but I can’t think of where it’s from
It's a piano cover of the first opening from The Witch From Mercury.
@@Default653 ah, I feel dumb now
😅 that's too much
39
I
That looks gay!
🤣🤣🤣🤣