Cricut Maker 3: Unboxing, Set up and Making your 1st Cut!
Вставка
- Опубліковано 9 лют 2025
- For today's tutorial, I will walk you through unboxing your Cricut Maker 3, setting up both your machine and Cricut Design Space, and show you how to make your first cut!
Join Cricut Time for weekly videos on all things Cricut! Subscribe to see new tutorials, tips and project ideas on everything from using Cricut Design Space to using and unboxing machines like the Cricut Maker 3, Cricut Maker, Cricut Explore 3, Cricut Explore Air 2, Mini Press and EasyPress 2!
UA-cam Channel: / @cricuttime
#cricut, #cricuttutorial, #cricutdesignspace
Products used in this video:
www.amazon.ca/...
*Please note, this site contains product affiliate links. Cricut Time may receive a commission if you make a purchase after clicking on one of these links.
For all the videos I’ve watched for beginners. This one’s the best. Thank you ❤
Thanks, glad I could help!
Havent used a cricut for over 10yrs.... just got a maker 3 and - so super excited to re-learn and enjoy. Cricut has come a long way!!
Thank you very much, clear, concise instructions without any unnecessary waffle. I will be following from now on
Glad it was helpful!
Thank you so much for your tutorial. You have simplified set up and use and as a seem to be new cricket owner you will definitely be a go to thank you
This is such a great video. VERY informative and straight to the point
Thanks!
I thought I was getting a new computer for Christmas. Talk about surprised when I opened the first box to see a Cricut 3. My son overheard me talking with a niece at Thanksgiving who helped him find the right one and extras. I am gobsmacked! It’s been a very long time since I have been surprised at Christmas! My niece told me two things: A) Watch introductory videos before you even take it out of the box B) Use your iPad with it. That’s much easier than your phone and since my laptop is mostly for work, it keeps things separated.
This video was very helpful.
Welcome to the club! Did you try your first project yet? Sometimes it can intimidating getting started but you'll get the hang of it once you do!
@@CricutTime I have not. I watched videos, I’ve been moving things around in my crafts room and have storage and work surfaces almost sorted. However, I had to pause for prep for the start of the spring semester which happened this week. I hope to open the Cricut box tomorrow since I don’t have anything to grade this weekend. I have a faculty meeting tomorrow, but it’s not supposed to be long.
I purchased a Cricut Joy Xtra in August. I loved it so much I purchased a Cricut Easy Press 3 in October. Now I just purchased a Cricut Maker 3. I’m excited to make a lot of stuff.
This is exactly what I needed, thank you so much
Can’t wait to buy one!
Thank you so much. God bless you❤
Simple and to the point. Thank u!
Thank you. Very well done and easy to understand
Thank you very much! I will start to explore the app now, I would like to see if I can print out any patterns noo for my sewing project!
Thank you! Good tutorial.
Glad I could help!
thank you had my maker 3 for 4 months never nessed eith because i wasnt sure if it needed blades or what i used printer paper like you did to get the hang of it now I'm starting to understand the whole concept so basically if it was vinyl i could of used it as a sticker or iron vinyl to iorn on to a shirt i have the hat iron kit as well but i wanna get the shirt one too and start experimenting, so i printed my name not in cursive so ots all individual letters would i normally get transfer paper to keep it all aligned or something
With cursive, you have to do 1 extra step. Just select the writing, and then click on "Combine" in the bottom right corner, and then click on either "unite" or "weld". This will remove the cut lines between each letter. Good luck!
Awesome Tutorial. A very well made Video. Thank you.
So helpful, thanks!
Thanks! Want to get one to make tshirts for my fam and me. You made this less overwhelming. Which machine do you recommend?
Thank you so much.
The exact training i was looking for. Perfect.
I need to cut 3 to 6 inch letter stencils into thin card. I use stencils to draw letters onto stone for sculpture.
I'll need to keep centre tabs to retain the middle parts of some letters. Like O and B etc.
I won't need heavy weight card. Birthday card thickness is fine. Do you think the Cricut Maker 3 could do that?
Thank you very much in advance.
You forgot to do how to calibrate, do you have a video about calibration for the maker 3 because i am having trouble
Thank you for this!
No worries!
New cricut user and got one for the school I work at.
One thing I found was that design space wouldn't open or install until I switched my laptop to using my phone's hotspot. So apparently it needs an internet connection to start design space but the school's firewall wasn't allowing that.
How does it know to line it up when cutting it? Does it not have to be lined up to cut in one line? How do you know how big the paper you are cutting has to be?
Jonelle -better a late reply than no reply. From what I could see from the design area of the program there is a grid that displays the height and width of the design elements, in this case the design elements were 2" tall and fitted across the page without overlap, therefore the demonstrator cut a 3" tall strip by the width of the sheet. As for how the machine knows where to place the design elements I'm fairly sure that when the mat and media are loaded the machine does a pass, maybe two, that scan the top and bottom of the media and places the elements appropriately. Which is not to say that if the media you feed in is too small you run the risk of the cricut still cutting the elements anyway.
How do I get to the design space. ? I have it down loaded but can’t get back to it !
This was so helpful! Thank you so much
Can you upload a logo/image you already have to cut out?
Yes
I'm struggling with Bluetooth connection using android paired already but it doesn't want to connect
Hello what is the name of vinyl I need to use to just use standard transfer tape and to not use strong transfer tape. Thanks
You showed a dial to adjust the cut on a cricut Maker 3. Mine doesn't have a dial. Is the dial standard?
No worries, the dial is for the Explore line up, I just wanted to show that for those with an explore, because the set up is the same for both machines.
I am actually thinking about buying the machine, but your response will be what decides my decision, so I would like to ask you if we can use it for gold foil or not
Can you use an iPad or do you need a laptop or regular computer? I use my iPhone for everything
Thank U for your excellent video as I'm trying to learn before purchasing one.
Can you please tell me how I would type on an image before cutting it out?
I would like to make an invitation in the shape of a bowling ball for a banquet.
Thanks again!
Hey, did you figure it out?
Can you connect cricket with app instead of computer?
When will cricut maker 3 go on sale for $349.00 again? Kicking myself for missing that sale price recently
You are a great tutor
I appreciate that, thanks!
Can I make labels on fabric
You sure can! ua-cam.com/video/lk6kWPWY1Jw/v-deo.html
So, I'm officially an idiot. I did the tutorial, which is great, but I didn't know that my light grip mat still had the plastic coating on it when I put it into the Cricut for my test cut. Needless to say, that was a disaster. LOL UGH. I own a woodworking business, and I'm trying to expand my horizons with the Cricut. We bought the Cricut Maker 3, and just perusing videos on it, I see that it is an amazing machine!!
Well you’re not the only one feeling like an idiot😂 I forgot the whole mat underneaths because I used te smart vinyl but just a tiny square of it. Full on PANIC it scratched 2 tiny strokes but nothing bad but whew💀😂
Hi, what paper did you use?
I mean the paper you used for practicing?
Is the Cricut Maker 3 bluetooth compatible?
yeah
you mention a dial, where is it on the maker 3?
Make 3 doesn't have the dial.
that was very useful. thank you
Thanks!
is it normal for my door that won't open when I open top door as you demonstrated on this video? I literally manually pull down the 2nd door!
Yes you have to manually pull down the bottom door.
How does it know if you’re using card stock or any other?
You tell it what you're using when you go to make it.
Design Space only shows for MAC. So does that mean it doesnt work with Microsoft WIndows?
It works with Windows as well, here is a link that can help: help.cricut.com/hc/en-us/articles/360009378474-Design-Space-Downloads
Why can’t the Cricut not print and cut in 12x12?
I got the maker 3 today no mat or tools 😢
Return it. It should come with those things if you get the full set
I have a question the software is free or paid for this machine
Design space is free. cricut access is not.
Is this machine compatible with an Apple IPad ?
It sure is!
I ❤ u a lot.
This machine only works if it's actively logged into the cricut servers? AND our personal designs must be uploaded to their servers before we can use them on our machines in our own home?
I use Google docs or word for my own personal stuff.
No bluetooth?
I thought you made this yellow? How come it's white?
The color that you put on the mat is what it becomes. The color in Canvas (on screen) doesn’t change the color of the material. It’s for you to keep track of your layers if you have multiple.
Mine didn't even come with a blame or tools..
Uhhh help. I am technologically disabled. LOL
My screen isn't anything like this. So I'm confused already. For example the fonts.. I have 4 choices. I can't seem to find the rest.
Is it because you're on a computer and I'm on a tablet?
Yes, but you can download new fonts into your tablet if you want more to work with. There are lots of free font sites out there like www.dafont.com
I wish I would buy a machine without tools! Smh🤦♀️🤦♀️🤦♀️🤦♀️
I was under the impression that you didn’t need a mat to cute with the maker 3. Is that incorrect?
You dont need a mat for smart viynl
So when exactly do u need a mat?
Very helpful video, thank you, and a charming accent also, where in America do you hale from?
Does not come with tools.
Some are sold as a bundle deal with tools and or sample materials
Mines darn sho didn't
@MrOner07 can you suggest one?
@@ihavenoideawhatimdoinghere6285 nicapa...off brand one works too
Mine came with tools but it was packaged &’ shipped separately than the machine.
What is this thing? What is it used for?
Welcome! This is a smart cutting machine for crafting!
I appreciate your video, but you went too fast for beginners.
@thorragnarok2861
Thank you!
Use pause and slow speed.
Standard UA-cam tools.
Is that Minnie Mouse doing the voiceover? It’s so little girlish I couldn’t sit through this video.
What happened to You Tube Respect for others rule?
Did you miss that one?
Ugh the looping music! 🤦♂😟