Man you are a teacher for real. I appreciate you! I have watched at least 20 different videos like this and by far you have gone into the most depth and have made it easy to understand. Keep ‘em coming!!
Excellent -you take it slow, explain everything clearly, and your way of speaking is really helpful. I kept waiting for you to say, "We have a happy little peak living over here, wanna make sure we get that...
Great tutorial. I'm a home tinter. lol. 4 failed attempts using Lexan film on a VW Golf R back window. Your tips made #5 a complete success. Thank you, thank you , thank you.
Thank you, I never knew the golden rule about tint only shrinks from edge to edge, I think this is where a lot of people make the big mistake.great video.
This is the best video I have seen so far explaining how to properly shrink window tint. I love how he not only shows you how but explains WHY he does it the way its done.
This is how to teach people something. You are the one i can see that you show everything you know. Did not hide technical. Many thanks for your helpful tutorial.
I’ve watched every video on here of how to shrink a back glass and I haven’t been able to get it. Perfect. Yours really helped out a lot man. Thanks for making the video.
dude! finally! big help, a lot of channels keep the important details to themself unless you buy their program i know exactly what ive been doing wrong! several solutions here
@@kenssalvador7253 no need to wet the film at all.Use the heat gun flat out warm it up for about 5 secs,dont hold it too close and also keep the gun moving.
Thank you for this video! The explanation of looking for peaks and when it platos across and creates a line to push your finger through it to create peaks is really helpful and I think that’s what I’ve been messing up on
This video was a TON of help. Im in the process of trying to learn how to tint and im pissed off and pulling my hair out. This video taught me EXACTLY what im doing wrong. When i have the energy to try this again im sure this will be the fix to my problem. Thank you for taking the time to make this video.
Haha me too! I'm a professional car wrapper and thought tint would be childs play, I was wrong! I totally understand the energy thing, when something beats me this bad, it sucks away the will to try, the excitement of trying a new thing is gone lol
Seriously the only and best video I could find on what to apply the dryer sheet to the back window so it could be shrunk properly. I had a hell of a time today with direct sunlight in the wind blowing. This video gives me a lot more confidence on these curved windows.
Excellent! did my first window tint it came out great! ... and I did it to my rx 8 rear bubble glass. excellent advice on listening to what the film dictates I let the film do the talking and it worked great.
This was the most easy to understand film shrinking vid, the other vids tell you HOW to do tint stuff, but not the WHY. I got too close to the non factory edge and immediately a horizontal finger appeared just like he said! Luckily the window wasn't that curved and it still worked fine, but we'll see if it lifts or peels later because I shrank the wrong edge. It's hard to do the top and bottom without hitting the wrong ends!
Awesome! Thank you for the step by step to look out for. Trying my 3rd attempt on back window. 4 hrs later and I have a perfect tinted back window!! I found using a glove instead of a hard card helped with heat control on film.
tried tinting my window a year ago, came out horrible so i gave up, today youtube suggested your video, and i am glad it did, great instructions. you have a new sub
Got to get that dialed in. I'm good though not great just yet. Though I'll get there! Practice makes perfect!🙌 Video gave me pointers. Good looking out.
Bruh, thank you SO much! I have watched many many vids on how to tint a back window and have attempted it just as many times, but I would always end up creasing it. I could never get the sides tacked down and could never figure out why. I don't know what magical words you said that finally clicked inside my head, but I am SO happy to say that after watching your vid I *finally* tinted my back window in one piece and without any creases! Thank you so much for being you, i am truly grateful 🙏
I'm very impressed with your skill, I'm thinking of doing a final re-do over with my rear window tint once again. My mistake was the corners plus I have air bubbles at the bottom. Plus my tint doesn't cover the full rear window. I got to do two tints side by side more like across".
I got your superior charcoal to do my personal vehicles and I am at my wits end trying to shrink to my 2017 pathfinder. Think I've used half a roll trying and got frustrated so much after failing and left it looking not so good. But now after watching this video I'm going to strip it off and try again with your methods. Maybe you can show doing a rear window on one since no one else seems to have a video using the 17 pathfinder. Thank you
Nice video brother... best explained onw out there thus far ive done most of van and was running ourta film and now i know what ive been doing wrong twice so far because i ran it opposite way from the others so i just kinda picked up the right way by accident tbh but ill take it... lol god bless brother
Enough cannot be said about your teaching skills you made the theory of backglass shrinking understandable to me more than any other I have watched. As a 50y/o disabled dude I have sunk everything into the tinting gig like $450 investment and made only $50 but enough of that THANK YOU!!!
Best descriptive video I've watched so far. I'm trying to learn to tint some huper optik nano ceramic tint. I think its thicker. I think I tried before to shrink and the protective plastic layer was lifting. Im.going to try again. Practice makes perfect.
@@UptownFights my problem is the authenticity... They're selling Xcel and LLumar for literally half of shop cost on ebay as well .. hard to believe it could be real
@@kris54241Only thing I know is that mine did block alot of the heat. Its like night and day and I only put 70% tint on my car. Can't even tell its tinted. Also its thicker then the cheap stuff. If you really wanted to you could get one of those tint solor testers off of Amazon or eBay.
Do you recommend doing this for the driver doors that are only slightly curved? Like is this shrink method a must for all window tinting to get the best results?
Can you do a video of your 1 ply tint vs the superior charcoal for shrinking? I bought your 1 ply and could not get it shrunk perfectly on the windsheild. Between deciding to pay someone, or buying better tint, I bought more tint from you guys which is the supior charcoal
Hey Kevin, got some films from you guys, Im new tinter and this is my first tint purchase! Could you have a video on difference of films from high end to economy ones like ceramic, carbon and the regular economic films. Thanks for videos and informations, peace.
Of course my guy! I’m super happy you gave it a go! Keep watching. More to come! We do have a vid posted me showing the difference between the films and how they shrink. But we have more to come. Stay tuned!
I just bought some tint from you guys, shouldve asked this before but i bought 2 40in x 100 foot rolls of the 1 ply to practice with. Will that be okay to use to practice shrinking? I figured i could use this, then get the superior charcol after i get used to tinting so I'm not wasting the good stuff. I also mentioned your name in checkout, thanks .
Thanks for your detailed video, when I had my training that never explained how to how to shrink. He showed how to shrink and he started sitting in the chair, he never check our work if we do it right or wrong. What kind of card you use for shrinking? Is there a specific card to use for shrinking? Thanks in advance.
Great tutorial, after watched tons of video "how to tinting window", this is the best one tutorial. Sorry if this sound silly, but can I just heat the film from inside during installing/applying it to the window? or is it mandatory to heat it before installing? Appreciate for your answer. TIA
What happens if youre installing the tint and you find you didnt shrink it enough? Can you use the heat gun inside the car to remove small fingers or is that a no go?
Great question. Try not to let that happen. But it will from time to time. Do not bring the heat gun inside. Rather, heat the outside where the finger is till it's too hot to touch. NOT ANY LONGER THAN NEEDED or you can crack the glass. Then try and push the finger out. Best thing is to double shrink the film before installing it making sure it's a nice tight bottom or top edge. Video coming soon.
Man you are a teacher for real. I appreciate you! I have watched at least 20 different videos like this and by far you have gone into the most depth and have made it easy to understand. Keep ‘em coming!!
Excellent -you take it slow, explain everything clearly, and your way of speaking is really helpful. I kept waiting for you to say, "We have a happy little peak living over here, wanna make sure we get that...
Great tutorial. I'm a home tinter. lol. 4 failed attempts using Lexan film on a VW Golf R back window. Your tips made #5 a complete success. Thank you, thank you , thank you.
Youre welcome
Please consider becoming a dealer for HITEK. Fantastic pricing on premium film.
@@tintdepotpppppppppppppppp
Thank you, I never knew the golden rule about tint only shrinks from edge to edge, I think this is where a lot of people make the big mistake.great video.
Golden rule indeed!!!
This is the best video I have seen so far explaining how to properly shrink window tint. I love how he not only shows you how but explains WHY he does it the way its done.
The most descriptive video yet. Thank you so much.
I messed up two cuts on my back window thinking I knew what I was doing.
3rd times a charm!
Thank you! More coming.
The wet method favoured me more
one of the best videos i have seen on dry shrinking. very well explained! thank you
This is the best film shrinking tutorial anywhere on the internet. Hats off to Tintdepot for making this.
Amazing...haven't tinted in awhile but this one video showed more details and the 'why' to really understand how shrinking behaves. Thank you so much!
This is how to teach people something. You are the one i can see that you show everything you know. Did not hide technical. Many thanks for your helpful tutorial.
I’ve watched every video on here of how to shrink a back glass and I haven’t been able to get it. Perfect. Yours really helped out a lot man. Thanks for making the video.
Back windows and front windshields have been the toughest challenge this video is very helpful for me thank you so much!
Easily the best shrinking video, a lot of detail on what to look for and how to handle the material.
I really appreciate not just the how, but the why, in your tutorial.
dude! finally! big help, a lot of channels keep the important details to themself unless you buy their program i know exactly what ive been doing wrong! several solutions here
Glad you like it. We got much more on the way. Stay tuned.
Question never done it before and to shrink the rear windows do you need to wet the film or you dont have too
@@kenssalvador7253 no need to wet the film at all.Use the heat gun flat out warm it up for about 5 secs,dont hold it too close and also keep the gun moving.
Thank you for this video! The explanation of looking for peaks and when it platos across and creates a line to push your finger through it to create peaks is really helpful and I think that’s what I’ve been messing up on
This video was a TON of help. Im in the process of trying to learn how to tint and im pissed off and pulling my hair out. This video taught me EXACTLY what im doing wrong. When i have the energy to try this again im sure this will be the fix to my problem. Thank you for taking the time to make this video.
Haha me too! I'm a professional car wrapper and thought tint would be childs play, I was wrong! I totally understand the energy thing, when something beats me this bad, it sucks away the will to try, the excitement of trying a new thing is gone lol
@@T..C..M agreed!!’ It took me like a month to get back at it after the first troubled window 😂
@@T..C..M I’m a professional tinter and thought wrapping was in the bag. Yea right! Lol! Glad this helped.
Thank you for making this video! I’ve watched so many that didn’t teach me a thing I almost gave up
Clear as water... Thank you sir for taking your time and doing this video.
Thanks for watching
Seriously the only and best video I could find on what to apply the dryer sheet to the back window so it could be shrunk properly. I had a hell of a time today with direct sunlight in the wind blowing. This video gives me a lot more confidence on these curved windows.
Excellent! did my first window tint it came out great! ... and I did it to my rx 8 rear bubble glass. excellent advice on listening to what the film dictates I let the film do the talking and it worked great.
the visuals were good on this one
You make it soft and easy I really understand better than others videos that I have watched
This was the most easy to understand film shrinking vid, the other vids tell you HOW to do tint stuff, but not the WHY. I got too close to the non factory edge and immediately a horizontal finger appeared just like he said! Luckily the window wasn't that curved and it still worked fine, but we'll see if it lifts or peels later because I shrank the wrong edge. It's hard to do the top and bottom without hitting the wrong ends!
Thank you! More to come.
Just heat it and push the finger out.
You are a very honest teacher bless you
Out of all the videos that I have watched this the best ones.
Awesome! Thank you for the step by step to look out for. Trying my 3rd attempt on back window.
4 hrs later and I have a perfect tinted back window!! I found using a glove instead of a hard card helped with heat control on film.
If you dont have a card you can use a rag.
I realize it is kinda off topic but does anyone know a good place to watch new series online ?
i felt like wearing a glove while holding the card duue to the heat.
Searched for awhile trying to find this video again. Best tutorial I’ve found so far.
tried tinting my window a year ago, came out horrible so i gave up, today youtube suggested your video, and i am glad it did, great instructions. you have a new sub
i did'nt do the pre treatment with the dryers sheet, and unfortunately watched this after i had many creases. excellent video, thanks
Got to get that dialed in. I'm good though not great just yet. Though I'll get there! Practice makes perfect!🙌 Video gave me pointers. Good looking out.
Thanks for watching. We appreciate the comment. :)
Just started tinting and this video got way more descriptive than any other video.
Good work man!! The first time I didn't look for a different video after 30 seconds. You helped me out a lot and I appreciate it!
Bruh, thank you SO much! I have watched many many vids on how to tint a back window and have attempted it just as many times, but I would always end up creasing it. I could never get the sides tacked down and could never figure out why. I don't know what magical words you said that finally clicked inside my head, but I am SO happy to say that after watching your vid I *finally* tinted my back window in one piece and without any creases! Thank you so much for being you, i am truly grateful 🙏
I'm very impressed with your skill, I'm thinking of doing a final re-do over with my rear window tint once again. My mistake was the corners plus I have air bubbles at the bottom. Plus my tint doesn't cover the full rear window. I got to do two tints side by side more like across".
Sir you di man..littery did my first successful shrink earlier today after just going half way through this video 👍🏿 best shrink vid
Finally, a decent video explaining how to shrink tint
Dawg….this is beautiful. This should be the only video anyone should watch. Great explanation and execution.👏🏽👏🏽👏🏽👏🏽
I'm really appreciate n grateful for the videos you made. It's was very lot of important details. Thank you!
This video is an exact tutorial not just showing how to like others.
I appreciate you taking the time to make all these videos.
I'm happy to. Thanks for watching.
Would love to be able to use your tint but unfortunately I’m in the uk 😢great video helped me a lot after 5 failed attempts number 6 was perfect 😊
I got your superior charcoal to do my personal vehicles and I am at my wits end trying to shrink to my 2017 pathfinder. Think I've used half a roll trying and got frustrated so much after failing and left it looking not so good. But now after watching this video I'm going to strip it off and try again with your methods. Maybe you can show doing a rear window on one since no one else seems to have a video using the 17 pathfinder.
Thank you
Do you still have any questions I’m happy to help , I’m a professional window tinter
Not even my trainer for tint and ppf could teach me how to shrink correctly in person and you did it for me in 5 minutes over UA-cam thank you😂😭
i like your method of teaching window tint , you are the best on UA-cam literally
Excellent teaching. The best on UA-cam so far.
Thanks man I’ve been having trouble with this. You made it easier for me great explanation, and I will keep practicing on it.
That’s brilliant!! A fair few bits in there which I haven’t been doing THANK YOU!! Will be trying this at the weekend
Thank you. Good luck. Happy it helped.
The best I have seen so far, great video and very calm teaching, thanks a million. I also subscribe 💪🏾
Best back window tutorial. Very detail, thank you!
Excellent video, I’m looking to tint my tractor 🚜 thank you for this great educational video!
Really love this guy! So easy explaining I’m getting my heat gun
This was the best how to on UA-cam. Thanks so much!
Nice video brother... best explained onw out there thus far ive done most of van and was running ourta film and now i know what ive been doing wrong twice so far because i ran it opposite way from the others so i just kinda picked up the right way by accident tbh but ill take it... lol god bless brother
This is the best explanation for me so far..!!!
Awesome!
From Brisbane AUSTRALIA. Thank you. Cheers
Enough cannot be said about your teaching skills you made the theory of backglass shrinking understandable to me more than any other I have watched. As a 50y/o disabled dude I have sunk everything into the tinting gig like $450 investment and made only $50 but enough of that THANK YOU!!!
Reach out to Kevin directly if you have any questions.
WELL GET OUT THERE AND GET YOUR HUSTLE ON BRO., YOU CAN DO BETTER THAN $50
Best descriptive video I've watched so far. I'm trying to learn to tint some huper optik nano ceramic tint. I think its thicker. I think I tried before to shrink and the protective plastic layer was lifting. Im.going to try again. Practice makes perfect.
Where were you able to get that film from?
@@kris54241 ebay. Huper optic. Make an offer they will come down.
@@UptownFights my problem is the authenticity... They're selling Xcel and LLumar for literally half of shop cost on ebay as well .. hard to believe it could be real
@@kris54241Only thing I know is that mine did block alot of the heat. Its like night and day and I only put 70% tint on my car. Can't even tell its tinted. Also its thicker then the cheap stuff. If you really wanted to you could get one of those tint solor testers off of Amazon or eBay.
Thank you so much I used you advice and my first backglass came out perfect you should teach this shit
Glad it helped.. Thank you for your comment.
Bro!!!! The best vidoe I ever saw on this great knowledge thanks for this wish me luck
Extremely helpful! Good teaching. Appreciate the video.
Most difficult part of tinting to learn, but once you get it down its the best looking window on the car
Hi! Thanks for the video! Can i use hair blower?
Man, this is fantastic. Just what I needed
Awesome!
This is gold right there,. thanks a lot sir
GREAT VIDEO DEFINITELY A LOT OF HELP
Best instructions on youtube. Thank you.
Got some tint from you guys shrinks great
Thank you! Glad you like it.
Yessir!!
I'm gonna need this job!
Great tutorial, can you use any dryer sheets?
If you mean brand, I personally use Bounce. Cheaper ones seem to have less chemical on them. Snuggles works too
@@onpointprostyles thanks for the advice 😁
Do you recommend doing this for the driver doors that are only slightly curved? Like is this shrink method a must for all window tinting to get the best results?
thank you for this video! helped a great deal!
Can you do a video of your 1 ply tint vs the superior charcoal for shrinking? I bought your 1 ply and could not get it shrunk perfectly on the windsheild. Between deciding to pay someone, or buying better tint, I bought more tint from you guys which is the supior charcoal
This helped a lot! Thank you. Do you tint over the defrost lines? Still confused on that aspect
Defrosters doesn’t matter. Tint it. Just shrink and prep properly
Hey Kevin, got some films from you guys, Im new tinter and this is my first tint purchase! Could you have a video on difference of films from high end to economy ones like ceramic, carbon and the regular economic films. Thanks for videos and informations, peace.
Of course my guy! I’m super happy you gave it a go! Keep watching. More to come! We do have a vid posted me showing the difference between the films and how they shrink. But we have more to come. Stay tuned!
@@cffrost2 appreciate that boss.
I just bought some tint from you guys, shouldve asked this before but i bought 2 40in x 100 foot rolls of the 1 ply to practice with. Will that be okay to use to practice shrinking? I figured i could use this, then get the superior charcol after i get used to tinting so I'm not wasting the good stuff. I also mentioned your name in checkout, thanks .
Thank you for the info
Absolutely
Great job 🙏👍
Did you remove the clear liner to shrink the tint?
Thanks for your detailed video, when I had my training that never explained how to how to shrink. He showed how to shrink and he started sitting in the chair, he never check our work if we do it right or wrong. What kind of card you use for shrinking? Is there a specific card to use for shrinking? Thanks in advance.
Good teaching lesson mate.
Thanks for your feedback.
Well done 👍
damn you make it look so easy
Do you have a video on splicing? I know many dont do it but it is handy to know.Thanks
Great tutorial, after watched tons of video "how to tinting window", this is the best one tutorial.
Sorry if this sound silly, but can I just heat the film from inside during installing/applying it to the window? or is it mandatory to heat it before installing?
Appreciate for your answer. TIA
very good instruction, i finally understand it
Best explanation, I will try it soon.
amazing video and explanation thank you
Thanks.Good explanation
You make this look so easy haha
Follow up, watched this 4 hours ago and just did my first back window successfully! Thank you very much man
I’m commenting as I’m watching this. But I’m wondering-you said leave a little extra for the shrink. How much did it shrink? 1/8 inch(ish) 1/4 inch?
Is the backing underneath the tint film while dry shrinking?
Big thanks! dude...
Thank you mr
Thanks for the video
What side are you putting against glass to shrink? Film side?
Hello nice video , can you say what you apply on the glass to can mold the tint? Thank you
Awesome Vid! thank you so much. now I go buy a heat gun n get started
Good luck. Stay tuned for more content
@@tintdepot Thanks for the reply. Much appreciated
@@urmahhuh did you them?
what kind of tint? 2ply or 1 ply? I want to know if there's a difference with tint thickness. thanks!
Yes. There’s a difference. This is a 1.5 mil. And that’s the thinnest I’ll use.
What happens if youre installing the tint and you find you didnt shrink it enough? Can you use the heat gun inside the car to remove small fingers or is that a no go?
Great question. Try not to let that happen. But it will from time to time. Do not bring the heat gun inside. Rather, heat the outside where the finger is till it's too hot to touch. NOT ANY LONGER THAN NEEDED or you can crack the glass. Then try and push the finger out. Best thing is to double shrink the film before installing it making sure it's a nice tight bottom or top edge. Video coming soon.