hey thank you for this vid. i built one and just used it on a shoot. it worked great and lasted for more then two hours! with two old white lightning 10.000sbcp strobes. i do use a GFCI plug just to be safe. i have run a 3rd strobe one it with no problems but didn't need it on the shoot lol. thanks again! i made it #1 to see if it would really work. #2 the vagabonds 2's all seem to be on back order!! and i needed some thing to shoot with now! lol. ..............rick
@maomao55 Let me explain how I understand this: 1380WS is what those 3 light releases within 1/500 of a second when firing. this is not what they consume, and 300W inveter suppose to handle 300W ot CONTINUES draw, while can handle much more for a fraction of a second. What you have to look for is a maximum curent draw of a flash unit: for Enstein or WL it is about 18A for a first tent of a second after each pop. More on the blog, see description under the video, cant post more here
This is awesome.. Does it work with any flashes other than PCB lights? ALso I'm wondering if it can recycle quickly , otherwise higher powered flashes like the BXRi might error up soon as the voltage drops.
Hi Akel, been followed your blog for a while and have some question here. As not having any electrician BG, i might sound stupid but how could a 300w converter be capable of supporting 3 lights, where its a sum of 1380 ture watts(640x2 + 160). I own 1x500ws and 1x 1200ws elinchrom head. Do you think this 300w converter will be over load to supply both heads the same time? Should I get 500w or higher converter instead? Or the battery need to be enhanced as well? What combination you suggest? thx
I have a 300watt pure sine inverter with 12amp hour battery and interfit ex150 strobes. It tries to charge the strobe but clicks and resets without charging the strobe
hey thank you for this vid. i built one and just used it on a shoot. it worked great and lasted for more then two hours! with two old white lightning 10.000sbcp strobes. i do use a GFCI plug just to be safe. i have run a 3rd strobe one it with no problems but didn't need it on the shoot lol. thanks again! i made it #1 to see if it would really work. #2 the vagabonds 2's all seem to be on back order!! and i needed some thing to shoot with now! lol. ..............rick
I just ordered my pure sine 300 watt inverter. I was going to order the Alien Bee carrying bag, but I like your bag idea much better. More practical.
Great job! Thanks for sharing!
I made one with a wheel chair battery for my alien bee ring flash.
@AKELstudio
No I was on a budget, so I got a cheap one with a modified sine wave.
So far so good. I've used it about 15 times.
@maomao55
Let me explain how I understand this: 1380WS is what those 3 light releases within 1/500 of a second when firing. this is not what they consume, and 300W inveter suppose to handle 300W ot CONTINUES draw, while can handle much more for a fraction of a second.
What you have to look for is a maximum curent draw of a flash unit: for Enstein or WL it is about 18A for a first tent of a second after each pop. More on the blog, see description under the video, cant post more here
@Bluestill Great, wish you best luck with the project:-) Send me few pictures of your pack when it will be done, curious to see how you did it.
Thanks Akel, nice video!!
@CANDACE2984 it was in Autozone:-)
This is awesome.. Does it work with any flashes other than PCB lights? ALso I'm wondering if it can recycle quickly , otherwise higher powered flashes like the BXRi might error up soon as the voltage drops.
@photo1965 Cool, must be a big battery:-) Did you use Samlex inverter?
@maclaren4l Yes, more for a safety: want to be sure inverter is not connetced to a battery when stored.
@bigsmooth71 It should be (based on Ah) twice as Vagabond II has in spec. I've never run in till the end..
Hi Akel, been followed your blog for a while and have some question here. As not having any electrician BG, i might sound stupid but how could a 300w converter be capable of supporting 3 lights, where its a sum of 1380 ture watts(640x2 + 160). I own 1x500ws and 1x 1200ws elinchrom head. Do you think this 300w converter will be over load to supply both heads the same time? Should I get 500w or higher converter instead? Or the battery need to be enhanced as well? What combination you suggest? thx
I have a 300watt pure sine inverter with 12amp hour battery and interfit ex150 strobes. It tries to charge the strobe but clicks and resets without charging the strobe
this actually works well? doesnt blow up?
Hey Akel, i'm wondering what is the use of the switch? Is it for safety?
On the Avasva you can count on professional help with problems and technical support.
学习了
At 08:50 i though he broke it lol
u counted so fast its actually 5 seconds xD even better, nice work tho
eeeeK! irritating intro music!