YAMAHA YZ250 build first ride! - FINALLY!!
Вставка
- Опубліковано 6 вер 2024
- Hey guys, I am so glad to share this video finally - Yamaha YZ250 build first ride and first impression. We met with Mark Tilley from @DirtBikeMagazine tested this 2 stroke dirt bike build together and share our feedback with you. Check out the video and let me know your thought, cheers!
Dirt Bike Magazine story:
dirtbikemagazi...
Direct Video Link
• Yamaha YZ250 Two Strok...
Dirt N' Iron merch: www.dirtniron....
www.dirtniron....
/ dirtniron
/ dirtniron
Brought to you by:
Fly Racing
www.flyracing....
/ flyracingusa
/ flyracing
Factory Links
shopfactorylin...
/ factory.links
/ factorylinks. .
things I use and recommend:
my air filter care: amzn.to/2LpPFcC
my engine oil 2stroke/4stroke: amzn.to/2kNTk98
my hour meter: amzn.to/2xLgRRp
my body armor: amzn.to/2xLpLOR
my knee guards: amzn.to/2xKzIvI
my boots: amzn.to/2sJlaqu
my handguards: amzn.to/2JiAq4C
my armpump solution: amzn.to/2Jv0WeI
my camera lens: amzn.to/2GNDU0e
my camera: amzn.to/2ZFX6ok
Yamaha yz250 2 stroke build first ride
Yamaha engineers didn't put any thought into the 250x transmission. They literally just pulled existing parts off the shelf from the wr400/ 426 and threw them in. 3-5 are identical parts between the 250x and 426. Guys were doing this mod many years before the 250x was ever released. You can actually fit the entire wr426 trans is you wanted the lower 1st and 2nd
thanks for sharing Cody
Cody, my vote is that he should pull the engine down and put the full WR trans in.
I hope i have a dirtbike like that its so amazing !
glad you like it!
It will b that amazing fr one ride and then you take a couple spills and it never looks the same😭
I have a 2017 YZ250X with a SmartCarb and a Scotts stabilizer. STUPID amounts of fun to ride BRRAAAAAAAAAAAAAP!
Sick build brother- truly one of a kind
thanks a lot, appreciate it!
Spectacular build! Congrats on the cover! The bike looks amazing and holy cow Mark can fly! Super fun to watch, great camera work. Those trails by the freeway also looked awesome. Way to go man! 👍✌️
Glad you liked it!! thanks for the feedback brother!
The reason 3rd gear is shorter is because 3rd, 4th and 5th are from the WR400/426 gearbox.
Yamaha didn't engineer anything, they just cut and pasted the two boxes together.
It's not possible to keep the YZ 3rd and run it with the WR 4th and 5th because the YZ 3rd has three dogs for meshing with 5th. The WR 3rd and 5th have four dog system.
The proper way to make this bike an enduro is to put the full WR400/425 gear box in.
The WR gearbox is alot more even between all gears and it is amazing offroad!
Rado my advice is to pull the engine down and put the WR 1st and 2nd in. It's totally worth it man!!
yea.. not a lot of R&D there..
Yet another sweet build. So pumped to see you grow and be featured on various companies websites and magazines. A true testament to perseverance and persistence! Great job
Much appreciated Tim! we should ride together soon
Dirt N Iron yes sir! Just waiting on some parts for my 300 and then we can hit the trails ASAP!
Yes!!!!
Pretty awesome too, you are catching up to Dirtbike mag in subscribers
haha, thats right.. ;)
Wow dude, some of those shots were slick as, nice production:)
Glad you liked it! Travis Fant is great with the camera!
Wow! That engine has some grunt, sounds great.
thanks Glade!
Sounds like exactely the kind of bike I prefer.
glad to hear that Paul!
Amazing build, that´s for sure.
Congrats Rado.
Glad you enjoy it! thanks bro!
Wow that thing rips
thanks, glad you see it that way!
That bike sounds mint bro, good job 🤙🏿
thanks bro, appreciate it!!
Looks great but Wouldn't it be easier and cheaper to buy a 2016 250x because i know building a bike isnt cheap especially sending of parts but when you come to sell it and people watch this and the dudes saying its really close to the x model there just going to buy the x
He wanted specific motor stuff done, as well as suspension
@@KB3AOL I talk to this dude all the time and been watching the channel for a few years and every bike his done a build on his sold yes he rides it but at that point it’s going to get scratched up beaten etc so when it comes to selling it he gets a lot less here in the uk you rarely even find a x model and when you do there £4k for a 2016 there’s a ton more in America and there cheaper I know he paid cheap for the bike but his brought a whole new engine send it of to get ported + crank piston seals bearings bolts Plato a graphics all bearings and seals for the bike wheels tires kickstand exhaust protecting items seat cover bars sent the suspension of etc at just a couple of those things his already spent more then buying a x model in really good condition if your buyers know you well then they would know what you have done to the bike but when you have people saying oh it seems pretty close to the x model and he wants 6k hypothetically when you can buy a low hour x model for 4k which are you going to buy because I know I would go with the x model by saving 2k for maintenance or travel or buy some parts because it’s not like your just riding it very smooth all the time you flipping the bike down 20ft drops your dropping the bike constantly so it really doesn’t matter what condition it is in by looking at it
good discussion guys, its true that this isnt the most economical way to get a good bike, definitely not for an average rider, it makes sense for a youtube/magazine build. Lots of custom work, some of it very important some less important and some optional..
@@KB3AOL well said brother, thats exactly the way I see it
Now you need to get with Panthera and bolt on a E start to make it a complete build and would be awesome to do a how to video on the installation and follow up videos
that would be cool
Cool bike and looks like a fun build. The 250x is only $7500 new - don't spend too much.
haha, thats right! thanks Bogus!
I have a blown up yz250 2005 I’m going to be using your videos to rebuild going to be a lot of fun from the looks of it thank you so much! Awesome content
glad to hear that Dakota! dont hesitate to reach out if you have any question. Have fun!
Awesome bike!
Thanks! Glad you like it Martin!
favourite part of builds
glad you like it!
Its epic!
thanks Kolton!
Brother where are those trails i live near the 215
Sick bike bro
thanks, glad you like it!
@@dirtniron no way u replied I am a huge fan
@@connorm3459 of course i reply ;)
“She’s a beaut Clark! But don’t you be falling in love her. We are bringing her with us when we leave next month!”
Very nice build as always.
haha, thank you!
How did travis fant do the follow shots?
I believe from the pickup truck..
Awesome bike, love the Yamaha yz250, best platform for off road riding. Great rider, now that particular bike is not built for his style of riding, that makes it hard for him to compare. Great built, hope one day I can have one like that 👍 ✌
thanks for the feedback David, appreciate it!
Rado, You and Mark Tilley looks pretty serious about twisting the throttle. I'd like to throw a leg over the Yam if you could scare up a set of training wheels for me! Haha! You probably think I'm kidding. Keep the Faith, my Brother. P.S. You did a hell of a job on the bike.....Tom
haha, thank you Tom, glad you like the build! Mark is such a good rider, it was blast watching him ride my bike!
Awesome filming!
Glad you enjoyed it! Travis Fant is a pro 👍
Those are some awesome trails!
I think that guy in front of you on the KTM was slowing you down!
haha, he is racing endurocross he is way out of me league 👍😉
Beautiful job... You sure made a trail weapon out of that YZ 👍
thanks bro, glad you see it that way!
can you do a video on wiring a dirt bike
I just install the wire harness, its usually very simple.. the only thing is to follow proper cable routing
@@dirtniron kk maybe next time 😊
Awesome bro
🤙
2021 yz450fx or yz250x , got my 6th yz450f up for sale which is 2017 and I absolutely love the power it has and it's handling is excellent and I haven't had a 2 smoke since my 02 cr250 and I'm 41 now and I've got the 2 stroke itch , 99% of my riding is bush/enduro I'm thinking that the yz450fx will be the better choice , electric start and a 7 1/2 ltr tank .... 😱what to do 🇦🇺🤙
both! :)
@@dirtniron you know what bloke, was thinking the same thing, might be in the dog house for a few weeks but it'll be worth it , she can build a bridge and get over it 🇦🇺🤙
I got a 2019 ktm 250 sxf with 34 hours im trying to trade for a yz250x. Hope i can find one.
This was a great video guys.
cool. glad you like it!
Best ever 2-stroke late 90s KX250 steel frame I have a 98
thanks for sharing!
If Yamaha fit a starter on the YZ250(x) they'd be a serious overall sales contender
we would all be so happy!
Well there is the pantera kit for like a grand
Nice work!
Thank you Jordan! Cheers!
Awesome
thanks!
Great 👍 i love it where was the smart carb ?
half of the riding is with smartcarb and half with the stock Keihin & JD, we did a lot of testing. Comparison video coming out soon
Nice 👌
Yamaha is the only way to go as far as l know or you can get a beta 300 one and see what you think then
Austrian production is pretty good too ;)
Hey man I'm building something very similar and I've got a few questions if you could give me a way to contact you
@dirtniron on Instagram, send me a message there. Hope i can help
Where he get the bike
I dont understand your question
Where did he buy the bike
Do you do UA-cam as your main source of income or do you also have another job?
youtube is my hobby, I have full time job
@@dirtniron do you plan on making it your full time job if u get enough income from it
Is he in a hurry? OMG
haha, yea looks like ;)
First
cool man! any feedback about the video ? ;)
it was 2:00 am when i saw it. just watched it now sick video man love the bike
It's hard to review a bike when it's the complete opposite of your riding style.
yea, but it still did pretty well ;)