Unfortunately, we can no longer recommend EcoFlow products due to recent changes that have raised concerns for us and our legal team. While we've supported their products in the past, they no longer align with our commitment to providing the best for our customers. Above all else, we value reliability, transparency and accountability. This decision reflects our dedication to those principles. If you have any further questions, please reach out to our customer service team - we're happy to steer you in the right direction!
Hi, I have a refrigerator currently wired with a cigarette adapter to power it. Can I just cut the adapter off and hardwire it into my EcoFlow Distribution box? I know there a fuse in the cigarette adapter, just not sure if by eliminating the adapter the Distribution box fuse replaces it. Thanks.
You can cut the adapter off and wire it directly to the EcoFlow distribution panel. You will need to make sure the fuse for the circuit you connect it to in the distribution panel is properly sized.
Thank you! Appreciate you taking the time to answer. I was thinking it was OK to do since theee would be a fuse in the distribution panel but wanted confirmation. Thanks again.
I see that the number of positive 12v ports exceeds the number of negative 12v DC ports. Where to the negative wires go when connecting more than 8 DC outputs?
You are correct. All of the negative terminals tie back to the same negative bus bar behind the panel. You can either double up wires on a few of the negative terminals, or there is a ground screw to the left of the terminals that could be used.
Unfortunately, we can no longer recommend EcoFlow products due to recent changes that have raised concerns for us and our legal team. While we've supported their products in the past, they no longer align with our commitment to providing the best for our customers. Above all else, we value reliability, transparency and accountability. This decision reflects our dedication to those principles. If you have any further questions, please reach out to our customer service team - we're happy to steer you in the right direction!
By any chance do you have any 5kwh batteries in stock on sale now?
@@georgebeebe2385 sorry, please read the comment above. We can no longer recommend buying EcoFlow products
Can't you use an AC power fridge instead of a 12volt?
There are AC circuits as well
Dear... Can we Run 220 volt appliaince?... Tq
The AC output of inverter in the Power Kit is 120V for the US version shown in the video. It would not run a 220V appliance without a converter.
Hi, I have a refrigerator currently wired with a cigarette adapter to power it. Can I just cut the adapter off and hardwire it into my EcoFlow Distribution box? I know there a fuse in the cigarette adapter, just not sure if by eliminating the adapter the Distribution box fuse replaces it. Thanks.
You can cut the adapter off and wire it directly to the EcoFlow distribution panel. You will need to make sure the fuse for the circuit you connect it to in the distribution panel is properly sized.
Thank you! Appreciate you taking the time to answer. I was thinking it was OK to do since theee would be a fuse in the distribution panel but wanted confirmation. Thanks again.
subscribed
Thank you!
I see that the number of positive 12v ports exceeds the number of negative 12v DC ports. Where to the negative wires go when connecting more than 8 DC outputs?
You are correct. All of the negative terminals tie back to the same negative bus bar behind the panel. You can either double up wires on a few of the negative terminals, or there is a ground screw to the left of the terminals that could be used.