Thank you so much. I have been working on my condo remodel and some walls are not 45 degrees. Was ready to call someone to do the trim but you saved me. This is from a female...63 y/o. You are kind to post this.
Your 3 videos explaining how to find inside and outside angles without an angle finder or protractor are great! Short and concise and really easy to understand. Thanks for these!
Thank you for keeping it straight to the point. Hate seeing videos where dudes start with all sorts of production, talking about the weather, their wives and mistress. Got my subscription… I don’t do so many. 👌
THANK YOU!!! I had seen a tiktok about this a while back and ive been looking all morning for something similar. this is exactly what i was looking for. Thank you again!!
Thanks! Just tried this today and worked like a charm. My husband tore out our remodelers' baseboards because the joints and caulking were sloppy. With this technique my husband's joints were perfection!
Holy Cow! This is amazing, I'm doing stain-grade molding in a bathroom, and I'm scratching my head trying to do these cuts, I see this and I'm blown away!
For me, the ideas in ua-cam.com/users/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
Yes sir, I am old school and used this method all my life until these fancy angle finders came into existence. Thanks for the video I always enjoy the old school methods.
Funny, I've used this method earlier today and worked pretty well . Works for inside and outside wall. Make sure you trace your line correctly otherwise your miter will be off
Am I the only one who tried to look around the top of his head 0:55 to see how he did it...... Great vid ....I've definitely stored this tip in my mental toolbox.
Stay strong, brother. Why aren't you teaching young folks? Thanks for sharing with us. The best part of the tip, which you didn't mention was how to cut both sides by leaving the same side of the base along the fence and just rotating the miter to the correct angle. Best to you and your family. Love the corona haircut.
Thank you for the info. Do these same principals apply to Crown Molding installed from a straight wall to an angled wall and back to a straight wall other than the Crown Molding on the Miter Saw inverted? This is a corner built in and need to install Crown on top. Could you provide your insight to this? Have you made a video similar to this one that covers Crown? - Thank you
Thanks for making it so simple that even I can understand it. You just saved me 20.00+. Can you explain to viewers who don’t know that there’s a situation where you cut the wood standing up and others flat down? I know baseboards and ceiling crown molding are cut standing up, can you elaborate further?
Definitely going to use this method once I get my mitre saw set up. It seems so simple & accurate. Just have to keep it tight or you’ll be off by a degree or two. Then the caulk comes out.lol
I'm trying to work out how to cut angels for moulding and dado rails going diagonally up the stairs with a plain hand saw and a digital angel meaureing tool. Any help of tips would be amazing?
Thank you so much. I have been working on my condo remodel and some walls are not 45 degrees. Was ready to call someone to do the trim but you saved me. This is from a female...63 y/o. You are kind to post this.
Your 3 videos explaining how to find inside and outside angles without an angle finder or protractor are great! Short and concise and really easy to understand. Thanks for these!
Thank you for keeping it straight to the point. Hate seeing videos where dudes start with all sorts of production, talking about the weather, their wives and mistress. Got my subscription… I don’t do so many. 👌
Where were you when I was doing my baseboards? You make life easy.
I’ve struggled with cutting these angles the s video has made it so simple for me thank you so much👍👍💙
THANK YOU!!! I had seen a tiktok about this a while back and ive been looking all morning for something similar. this is exactly what i was looking for. Thank you again!!
Thanks! Just tried this today and worked like a charm. My husband tore out our remodelers' baseboards because the joints and caulking were sloppy. With this technique my husband's joints were perfection!
You’re the best ! Always make my jobs faster with your tricks !
Thank you so much spent an hour trying to get this angle right and your trick helped figure it out no problem
Holy Cow! This is amazing, I'm doing stain-grade molding in a bathroom, and I'm scratching my head trying to do these cuts, I see this and I'm blown away!
best video on youtube "old school you ca't beat it"
Thanks for all your practical tips!!
Brilliant. Thank you. It's this kind of stuff I forget from my school years...
You made it nice and easy for me to understand it and Lord knows how much I was trying to learn that on my own.
Thank you, sir!
I knew there had to be a way to get it right. I STRUGGLED with this over the weekend, not anymore! Thanks!
Clearest video on this I've seen. Excellent
maaaaate! this is the best angle cutting video on the net, fact! thanks...
Brilliant. Technology is helping us forget some of our old school tricks.
For me, the ideas in ua-cam.com/users/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
- Another very useful, practical way to make angles without having to spend "oodles" of money. Thanx 4 sharing.
Yes sir, I am old school and used this method all my life until these fancy angle finders came into existence. Thanks for the video I always enjoy the old school methods.
Thank you
Dude, you are the MAN. Nice video. Simple and easy to follow. Thank you X 10,000
Sir......Thank you. Doing my own baseboard. First time. And was having bit of an issue without an angle finder. Thanks again. God bless.
AMAZING!!! I will definitely use this method from now on! Thanks SO much. I feel more empowered using my miter saw.
Always one of my favorite lessons and one of your earlier videos I go back too. Great
Verry good. Keep the videos coming. They help.
Will it work the same for an inside corner?
MAN, I wish I'd seen this BEFORE I cut my fascia boards for my deck, (which will now need a bit of wood filler and sanding to fix up!!!! Great tip!!!
Been looking for the info on outside angles and now I found it. THANK YOU SO MUCH!
I’m gonna try this. I hope it works out for me cause I am NOT having any luck! Thanks so much for sharing! 🤝
Thanks for the base tip...helped me out a lot!
Thank you!!! I took this example and applied it to my table saw to cut boards 20 inches by inches and it worked!!!!🔥🔥🔥🔥
Thank you! This saved me so much time.
Good video mate. Straight to the demo.
Thank you for making it easy and simple!
Brother I’m literally on a job n you just saved the day thanks so much 👍
Brilliant, simple, no-cost - my kind of stuff!
So appreciate the free tips! Thanks!
Awseome...thx...whats the best blade for cutting BBs?
First time seeing this method and it's awesome because i almost gave up on cutting braces for my shed
Funny, I've used this method earlier today and worked pretty well . Works for inside and outside wall.
Make sure you trace your line correctly otherwise your miter will be off
Thanks for sharing this great tip.. It will save me a bunch of time..😊😊
Brilliant, I have learnt a new skill, keen to try it out. In my experience, I've never seen a true 90 degree external corner.
Nice! I was wearing myself out yesterday trying to figure that out lol 😆 good job
How do you get the internal angles without an angle finder
Excellent tip. I'm a day late on watching this video. Had to track down my angle finder.. lol...
Am I the only one who tried to look around the top of his head 0:55 to see how he did it......
Great vid ....I've definitely stored this tip in my mental toolbox.
How does it work for inside angles?
Quick and simple great video brother
Wish I had watched this early this morning before I spent the entire day working on the trim for my staircase!
Nice! Nifty trick. I'm sure it will come in handy. Stay Safe and I hope your kids are doing well with remote learning.
Excellent video!!! Many thanks!!!
Thank you! SO helpful and worked perfectly.
What angle did you set your mitre?
Thanks! Awesome tip! 👍👍👍
Is it the same on the inside of the corner
Súper helpful tip! Thanks for sharing 🙏🏼
Stay strong, brother. Why aren't you teaching young folks? Thanks for sharing with us. The best part of the tip, which you didn't mention was how to cut both sides by leaving the same side of the base along the fence and just rotating the miter to the correct angle. Best to you and your family. Love the corona haircut.
How do you do that if it's an inside corner?
He has another video that shows you how to find an inside corner...
ua-cam.com/video/EyVL2ByubVw/v-deo.html
Great trick, looked it up today at my job, thanks again!
Anytime
How do you do that on an outside corner?
Thanks for the video, Very well done and simple.
Such a game changer for me, thank you.
Glad it helped
Thank you for the info. Do these same principals apply to Crown Molding installed from a straight wall to an angled wall and back to a straight wall other than the Crown Molding on the Miter Saw inverted? This is a corner built in and need to install Crown on top. Could you provide your insight to this? Have you made a video similar to this one that covers Crown? - Thank you
How would you cut a biggger board on a table saw? For example 24 inches by 30 inches? Thank you
What about an inside corner?
THE BEST METHOD OUT THERE 👌
But how do you use that for the inside wall?
Excellent Tip, Thank you, I needed that 👍🤗😊
Very nice, informative, video. Thanks.
Thanks for making it so simple that even I can understand it. You just saved me 20.00+. Can you explain to viewers who don’t know that there’s a situation where you cut the wood standing up and others flat down? I know baseboards and ceiling crown molding are cut standing up, can you elaborate further?
I’ve been wondering how to do this without an angle finder. Can’t wait to try out this technique!
Does it work the same for the internal angle?
No worries... I just found your other video that covers it!
Just brilliant. Thank you.
Did you ever do an inside corner?
EXCELLENT!! BRAVO!!!👍
Great job and good thinking God continue to bless U
Thanks
This is awesome thanks for sharing!
Definitely going to use this method once I get my mitre saw set up. It seems so simple & accurate. Just have to keep it tight or you’ll be off by a degree or two. Then the caulk comes out.lol
Good man ,great work 👏
bloody hell mate that's genius !!! thank you so much !!
Excellent thanks for the advice
I will now re-name my two oldest Sawdust and Wood. Thank you.
Incredibly helpful. Thank you!
I'm trying to work out how to cut angels for moulding and dado rails going diagonally up the stairs with a plain hand saw and a digital angel meaureing tool. Any help of tips would be amazing?
Dude, this is great! Thank you
Sick video me heads been falling off about doing this for the first time well in mate thank you
Well done, very helpful, sir!
how do you find inside angles
Straight and to to point, thanks!
What number are you using on your hair?
Love your channel
Thanks so much
That was awesome, thank you for the schooling.
Good tip👍✌️😊🙏🏼⚒⚒
Nice and easy and no tools!!!
Again God bless great job.
Awesome 👌. Like 👍
Thank you so much for your videos!!!
Slick trick! Thank you.
Wow! I'm gonna try this! Thank you!
Thanks for this amazing tip.