Click here www.hellofresh.co.uk/HELLODJ to enjoy an exclusive offer of 60% off your first box, a 20% discount for the following two months and FREE dessert for life! Alternatively, you can use the code “HELLODJ”. This special offer is available for new customers as well as those who cancelled their subscription twelve months ago or more. #ad
Joe, "never a lender or a borrower be" its an old moral but very relevant when you have brothers. I speak from experience with my younger brother; my tool box was always being raided, words were often said when i caught him. It kept the family swear duck busy.
Weld through primer/cold galvaniseing spray is good to use on bare metal. And doesn't soak in moisture as much. So might be able to be left longer between jobs and before finish primer and top coat
OMG don't tell me that you Joe and Danni used to live in that small van😳I do love my wife and we bean together since 2011,but i would need more space then that to live(need my own room,so i ca go watch a movie/gaming ect)And ofc we got 2 boys at 6 & 9 years old,so that would be hard to live there😂But we are not all alike and good is that😎Anyway i just love to watch you 2 cuz you always seem to happy and make me smile🙂And now i seen almost half of all your videos on the channel,and i love them all🥰Anyway way JOE have you got in the new motor in your both🤔?Hope you both have a wounderfull days and enjoy eatch day in your life❤Lots of love from Norway😎
Hi Matey. It took me 8 years to restore my Morris Minor and hand painted it with a brush. If you have to work outside like I did and have no tools or time . I would drop the price and sell it as a project. Cut your loses . The interior wood is horrid. My Morris I had to replace Horse hair in seats etc. Replace door panels with wood. When finished I just broke even on money. Time is more important than money. Old George.
I like watching your channel, its so much better than that irritating Ben and Emily, i much prefer people who dont try hard to be liked, just be yourself its simple. Great Van too 👍
So I got to thinking about your welder, and the hard time you had welding with it. Is it a mig welder that uses shielding gas? And you tried running flux core through it? If so you probably need to switch the Pos and Neg cables around so the Neg is on the gun side for Flux Core wire. Most people even pros don't run Flux Core much so they don't know to check the cable set up. Good luck with the rebuild.
Click here www.hellofresh.co.uk/HELLODJ to enjoy an exclusive offer of 60% off your first box, a 20% discount for the following two months and FREE dessert for life! Alternatively, you can use the code “HELLODJ”. This special offer is available for new customers as well as those who cancelled their subscription twelve months ago or more. #ad
'One for me and one for me!' Love it!
Danni will get her own back don't worry x
Joe, "never a lender or a borrower be" its an old moral but very relevant when you have brothers. I speak from experience with my younger brother; my tool box was always being raided, words were often said when i caught him. It kept the family swear duck busy.
Volkswagon engines never let you down! That's why the VW Camper was the most popular in it's day 😊 - and still sought over!
Weld through primer/cold galvaniseing spray is good to use on bare metal. And doesn't soak in moisture as much. So might be able to be left longer between jobs and before finish primer and top coat
Good luck Joe seems like a long project waiting for sun ha ha. This is the UK dream on
My dad has a sign in his garage that says, "No tools loaned". Best to make that clear from the start 😂
Fantastic job your doing Joe. The weather not been good to us. Summer should be here soon. Hope Danni ok.
OMG don't tell me that you Joe and Danni used to live in that small van😳I do love my wife and we bean together since 2011,but i would need more space then that to live(need my own room,so i ca go watch a movie/gaming ect)And ofc we got 2 boys at 6 & 9 years old,so that would be hard to live there😂But we are not all alike and good is that😎Anyway i just love to watch you 2 cuz you always seem to happy and make me smile🙂And now i seen almost half of all your videos on the channel,and i love them all🥰Anyway way JOE have you got in the new motor in your both🤔?Hope you both have a wounderfull days and enjoy eatch day in your life❤Lots of love from Norway😎
You never give up trying well done on your new project.
Well, the engine certainly did not let you down, that's a big Volkswagen plus!
Well you still keep smiling no matter how things get you down well done Joe love Pops
Feel your pain bro. I've been waiting to fit a new soft top roof on my Beetle for 2 weeks...🌧️🌧️🌧️
Hi Matey. It took me 8 years to restore my Morris Minor and hand painted it with a brush. If you have to work outside like I did and have no tools or time . I would drop the price and sell it as a project. Cut your loses . The interior wood is horrid. My Morris I had to replace Horse hair in seats etc. Replace door panels with wood. When finished I just broke even on money. Time is more important than money. Old George.
I like watching your channel, its so much better than that irritating Ben and Emily, i much prefer people who dont try hard to be liked, just be yourself its simple. Great Van too 👍
I remember you in the snow and ice working on this before you became a EcoWorthy celebrity :)
Well done for trying....our weather is just awful to try and do anything at the mo😖.
Better luck next visit 🤞 xx
So I got to thinking about your welder, and the hard time you had welding with it. Is it a mig welder that uses shielding gas? And you tried running flux core through it? If so you probably need to switch the Pos and Neg cables around so the Neg is on the gun side for Flux Core wire. Most people even pros don't run Flux Core much so they don't know to check the cable set up. Good luck with the rebuild.
Good try Joe 😂 the weather never plays ball. Looking forward to seeing it freshly painted though at some point. 😊. 👍👌
The never-ending project. Good luck Joe. I’ll pray for no rain.
Nice to be young Wolf-Man keep moving forward.
Another great bit of content. I’ll catch up on your van vids now.
And btw where did you get your glasses frames from?
Ohh btw i forgot to ask Joe,are you ah mechanic and electrician ?Cuz it seem you know alot about working with engine and electrical things😎
OK...see back on boat next ..bishops stortford herts
I last saw the vw on eBay Jo????
Cool I thought you had sold the van
You and the rust reminds me of Wildling Sailing uncovering plywood and fiberglass rot every few days.
good vid
Hi its so nice there.
Talk to the slaughterhouse guys, and raptor paint it!
I thought you had sold the van?
Hi Joe, can you recommend a rust treatment? I’ve been using Fertan on my boat but it’s so expensive now I’m looking for a cheaper alternative? Cheers
Look up vactan rust convertor
Jenolite , £33 per litre... goes a long way , and super easy to use
Why no video this Sunday just gone anyone know
Use square drive screws.
Where can you get those in the UK?
Id try a specialist fastener shop. Surely square drive screws are available there. Im in New Zealand and they're everywhere. @chrisrand5185
The engine was a plus, but it is odd to see you boat less.
I thought you’d sold the camper van.
Did I spy you not undoing a tie down rope dragging your tarp behind ?😅
That's a parachute in case it gets crazy and the brakes won't stop it.😂
👍
Thought that was history
Unwritten rule, never ever lend your tools out,especially to family.😢
Xx
:)