Tire Keeps Losing Air? Slime it!
Вставка
- Опубліковано 4 жов 2024
- How to fix a bead leak? The NIU KQi3 Pro front tire has a leak around the bead. The bead is the edge of a tire that sits on the wheel, this problem only occurs when you have a tubeless tire.
To fix the leak, you must take out the tire and clean the bead, unless your wheel is damaged, cleaning the wheel and the tire should solve this problem.
Slime is a tire sealant and works instantly and seals punctures.
Do not put slime into the valve to seal the bead, it won't work. (Putting slime inside the tire would only prevent/seal punctures)
Put slime around the bead on the tire and pump it up to 50 psi (or recommended tire pressure).
Danyo Sports Channel Episode 149
UA-cam: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports
I have this exact problem in my rear tire. Such a pain in the ass. Thanks for the video
I put weight into the side where there was a hole until I kept pumping and then it went poof the tire sealed
Nice
I have this scooter and the back wheel goes flat every time I ride it for 10km or so. It is fine when it is stationary, can't find any sign of leak or puncture when still.
same here, it drives me nuts hahah, on my way to work (15km) I had to inflate the tire at mid trip in order to not running low.
same problem I got on my apollo city
Same problem i replace the back tire a month later losing air again idk what to do anymore too costly to fix again and again same problem
@@CanadianSlashermy Apollo city rear tire too!!
great vid. this slime works like a charm!
Smart ill trt it later .. did you just put it on one side i think im having the same issue only on the front i have to make sure
Is there a wait period before adding air? I've done this 3 times. Its been about 10 hrs
I tried this but it didn’t work :( . I’m going to try to use a belt and strap the wheel tighter down to the rim and hopefully I can get a seal. But it’s not looking good . The tire shop was able to do it but I’m having trouble . Wish the slime worked .
Can you do this after putting slime in the valve!! Can I still do it in the bead.... When it's sitting it's fine when I ride it it gets flat again...
I even no matter what I do air leaks through even tried slowly adding air
Are these the same tyres the KQI3 Max has? They are supposed to be self sealing but I think that is more of a gimmick. I ordered some Slime to be safe anyway.
my apollo city pro is leaking the sealing gel and my back tire is leaking air from somewhere
Hi! Does it work if there's like a small crack on the tire? I've been considering changing it but it's so complicated so if I could fix it with slime that would be great. Thank you!
Cool stand to hold the scooter in the air, what is the brand?
great video.what kind of foam do you put on the tyre to check for punctures?
I used shaving foam.
Slime has fuxed my leak but from time to time it was leak out and go flat again. I'm suprised that slime doesn't dry out inside the tyre, it stays liquid
Cool, I'll try that but why not put the slime into the valve like instructed on the bottle?
No, only put slime into the valve if you have a tire puncture. To fix a leaking bead, you should remove the tire and clean the bead or put slime around it to properly seal it.
@@DanyoSports Makes sense, thanks for the answer! Also it worked great!
Do you have to put it completely around the tire or only where the leak is
Yes, you need to put it completely around the tire
wow...is this ur new toy?
Yes!
Did you take the tire off, or just apply slime?
No, I only applied slime.
Why you dont put inside i have same problem and same scooter
You have to put slime on the sides to seal the bead.
can you use superglue instead of slime?
Doesn't work