How to Replace Power Window Switch 2000-2006 Chevrolet Tahoe
Вставка
- Опубліковано 4 жов 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/36/y/...
This video shows you how to install a power window switch on your 2000-2006 Chevrolet Tahoe. No matter if it’s worn out, or damaged by weather or spills, a power window switch is an important accessory in your vehicle.
This repair was done on a 2005 Chevrolet Tahoe Z71 5.3L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obgi/1A...
• Phillips Bit in a Ratchet
• Pocket Screwdriver
• 7mm Socket 1aau.to/oa4W/1A...
• Trim Tool Set 1aau.to/o7P/1AX...
• T20 Socket
• Ratchet 1aau.to/obvU/1A...
• Socket Extensions 1aau.to/obnK/1A...
• Gloves 1aau.to/oWa/1AX...
• Safety Glasses
Subscribe: / @trq
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: • Chevy Tahoe 2000-06 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Wow found the correct switch assembly and except for couple minor differences in door panel fasteners your video was so well done that I was able to do myself. Amazon part was $120 compared to 3 times that at regional auto parts stores. Super happy
Got me through this job effortlessly. Thanks.
Helpful thanks. I would recommend testing the switch before buttoning everything back up.
excellent video, excellent explanation, excellent teacher
Very Helpful! Thank You!
Wow this helped a lot thanks a lot
Thank you for this video. Soo easy.
Very helpful. Good camera angle. Very helpful on dismantling. And what size screws torque everything was great. Very good video. Thank you very much. Very helpful.👍👍
Great video! Thanks for the assist!
Thank You !
Great video would this be the same process for a 2005 GMC Sierra?
I have a 2006 Tahoe. One feature I really dislike is the auto-express down front windows. No, you cannot just hit the button again to stop them. Once they're going down, they're going down. You do have to pull up on the switch the whole time to raise the windows. Can something be done so that the switch has to be held down the whole time to lower the front windows? I would much prefer it to be that way. Thanks!
could you show us how to reprogram them im installing a used window switch i pulled from the junkyard on my passanger door and my key fob won't work unless i plug back in the old window switch
also do these need to be programed? seems most people say no but sticker on module says it needs to be what's up with that?
Do these need to be reprogrammed by the dealer?
I like manual roll up windows. I wonder if a certain wire such as the main power source is bas .. As either everything's works or nothing works .
FYI this is a complete different switch for some Tahoes but the work is basically almost the same
one thing i been hiring about is the mirror switch for the left and right mirror at the top won't stay don when you go to adjust the mirrors. people have said they have to hold switch down to which ever side they want to control is yours like this?
Grey locking connector do you carry it for purchase?
@TRQ I replaced my door lock/window module and everything works fine except the unlock sequence with the key fob. Before I replaced my module, when I pressed the unlock on the fob, the driver's door would unlock with the first push, and on the second push, the 3 passenger doors would unlock. Now, after I replaced the module, when I 1st press the fob unlock, nothing happens, 2nd push the passenger doors unlock, then the 3rd push the driver's door unlocks. This is backwards. I contacted the seller and they sent me a 2nd module. Same thing happens with the 2nd module received. Is there a way to program this sequence, or are both modules wired wrong?
I had to program the switch during install by putting enclosed cardboard spacer under 1 connector. 1 year mirrors fold in when adjusting. How do I fix
After doing all this the next day my truck wouldn't start. And it would never have problems before. Everything is plugged in also.
No programming required?
Gotta do this later and we'll I'm disappointed in Chevy. My 2021 Peterbilt 389 for some reason goes through drivers side window stitches, 2 to 3 a year. No can figure it out why. I pop the switch out unplug it plug in the new one and the switch drops in. No taking door panels apart. Not that this is difficult just could have been way simpler is all.
+Ron Gittins Thanks for the feedback! 1aau.to/m/Shop-TRQ
replaced driver window switch in my 03 avalanche. Now driver door courtesy light stays on. WTH
Is it true that the keyless entry transponder or module is also located in that master window switch minus a 2003 GMC Yukon and I already tried programming the remote it will not program they told me to change out the module or the transponder can't seem to find the location I was told that the transponder or the module is located inside the window switch can you confirm
+@edwardkareem6446 The keyless entry transponder can be found behind the instrument panel cluster.
Way over engineered and expensive for notorious GM plastic. A tiny piece broke of mine just now and that equals this job lol great video instruction but that things getting super glue.
It takes 7 seconds to fix a 28 minute set up and reinstall 🥲
This helped alot 🙏🏾🙏🏾