iPhone 6 No Power Tristar and GPU Short
Вставка
- Опубліковано 23 лип 2024
- ⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - Наука та технологія
Bravo!
As usual, clear, concise & truly educational.
Many thanks.
I’m pleased you went through the elimination process without jumping to conclusions unlike myself. Stay safe. As always a 👍 from me. 🇬🇧
Thanks for the video, looking forward for the next one :)
Just curious as to why you didn't use the tristar tester first, once you suspected it (tristar) was bad? Was the short causing the tristar to overheat? Thank you for doing all these educating videos.
What Lens are you using on your microscope, 130x with zoom?
Great job again like always
why do you not use short killer to detect and eliminate the short
Thanks for a great video?
Do you think this can be done at home with hairdryer, solder tin and solder?
My phone is 'reverse' charging. And or not taking charge at all. Regardless of MFI cable or not.
Thanks for every and any insight.
no it cant
Salam alikom bro can u tell me if u can fix me my macbook 2109 touch bar when i turn it on it ask for Apple id and passeword that was before in it thanks
Hi man, i want to ask about my galaxy note 9 it start to flickering white screen when i try to lower the brightness below 70% and this happen after i got ota update for may security patch.. I really appreciate if you can help.
Thank you
Sir ..
what is Your Microcsope model
I think more important then refresh rate is bolometer matrix. If bigger then better.
Very usefull. Many thanks
Great video
Sir which smd do you use
I'm curious, do you use a KVM to assist with switching between these multiple inputs/outputs? Maybe an HDMI switch/matrix as well?
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dv-1hd%26_sacat%3D0&campid=5338440312&toolid=20008
@@NorthridgeFix Such a sexy setup.
Why do you stop when you come to GPU? I do not understand, you're eligible to fix it, is it the long time causing to fix it or another reason?!
It's not the GPU!!! GPU lines have a very low resistance. If your above 10ohms, you're good on that line. Check your I2C lines 80mah and bouncing is bad I2C line. Open schematics and check them. I'd also try a DFU mode restore and see if it errors out! Don't always just follow the heat...
Gpu even beeping in any good motherboard so I agree ☝️
good job
as it did not work do u get any money for the things you used on the phone
Can we get schematics....m for i phone
Bro on the down of tristar ic there are 2 ic. One on the left what its purpose ...nice skill bro and your calm minds.love from india👍
Tigris Ic
Pls sir can you give me a line to Ali express that I can get the temo cam and with the set of the red meter
Why aliexpress. Support our website northridgefix.com/product/iphone-current-meter-red-tester-for-iphone-6-up-to-xs-colored-display/
@@NorthridgeFix Do you ship to Australia? Great videos.
u done it sir
Unlucky dude.. looking good the next one ;)
What use can 60 FPS FLIR give that 30 FPS can't?
30fps is very good as long as you have the resolution to back it up.
when you remove tristar Glue ,
tell me what is temperatures ?
and ic remove .. .
Chanaka Naleen removing glue about 200 and IC 400
iphone 6 about 200.
Yes you correct .. we cant waste time to cpu short remove...
You have to be efficient and work smart. People who waste time reballing CPUs and show you a 3 minute footage on youtube have allot of time on there hands. Even worse if you did the work then find out CPU is faulty.
My friend, the problem is not coming from there. It’s a low resistance line this is why it’s beeping. If it’s not for data recovery, try dfu and tell which error. Love ur videos
But how??
It's not open to go dfu mode
I have replaced the battery from a local shop. After battery replacement. The phone was working for 10 days. Suddenly the display is just blank. Iphone gets detected in iTunes. It also detects the SIM card .But display is just blank.Data is very important for me .kindly help me to rectify this problem.I can ship this device to your place.
Great!
boss plezz send me modle thermal camera
Can we get schematics...
video excelente
Hello brother allow me to tell you that beeping sound of gpu line is normal because of low resistance .sometimes it could be misleading if you rely entirely on the sound without checking the multimeter reading on diode mode.
I am quite sure you know all that.but sometimes stress of work..forces us to neglect some details .
Thanks for sharing with us all these informative videos .
Follower from france
what can be a better way to test this? ESR meter?
Just to keep an eye on the reading on the multimeter. Though it reads a low resistance means line is good.still you all hear a beeping sound .
@@azhaim3397 at what point would you consider there to be an actual short?
Bearing in mind the resistance of the line.some can be 0.004.
O ohm is definitely ground
He is testing in diode mode 10:46.
Hmm I'm curious about the thermal cam. You say we should not waste our money and that we need 60 fps 320 by 240, but why? Are they not good you say? I have a flir one pro that's why I'm asking. 😂
You is mobile phone diagram site please
superi superi thanks
Excellent tutorial. Do you have workshop or train people to fix electronics? It’s hard to find a pro. Thank you.
Working on it and have allot of news to share about expansion and workshops. I will create a community post inform everyone, maybe by end of the month if all goes well.
Anyway you tried your best sometimes it does happens
I fon 6 touch conactor jempure bro only first track left bottom conactor
I think your thermal cam is FLIR
reball cpu :)
What school did you finish for fixing electronics..good video..bye
I Graduated from Polytechnic University Brooklyn NY BS in electrical engineering. Schools do not teach repair, however they give you a strong background to lean on to. It's best to learn repair from someone in the business who does repair. We will working on having workshops in the near future. I"ll keep everyone posted.
@@NorthridgeFix That is great...Yes it is true,you can learn alot from other servicmen or repair man about fixing electronics...its good to learn components and run a diagnostic check its great ...Keep up the good work...you are great :)
@@NorthridgeFix How many times I asked this question my self !
+ 1
You wrote GPU, not CPU… which threw me off, since you kept saying it wasn’t drawing amps… even with a dead gpu, it would still draw amps
Nice try ✌️✌️✌️
You can't fix em all
IDK the seek compact pro with macro lens is REALLY good and only like $500 not thousands. I'd say just as good as your camera from what I've seen and Jessa from ipadrehab swears by it and shes tested and used almost all thermals
I use seek compact pro with macro lens and I can say that it is worth it. Just need a little bit of practice
Yup I‘m using it too, but need the Micro lense.. you have a good source for this part?
I bought it on Ebay. You can order it on unionrepair too. The lens makes it easy to use the thermal cam on microscopic components.
Abdelali Jourari I saw some local suppliers are selling it here for about 70€, but I think it‘s too much
If my memory serves me right, I paid 65-70 USD for it. The seller was from the UK
Can not win all the battles
👍👍👍👍👍👍👍👍👍👍
*REDACTED*
Tape can actually deform and cause components to move when heat is applied and solder liquefies. I wouldn't recommend tape over components.
@@NorthridgeFix o0o0o0o0o0o0o0 I learned something new then. Thanks!
@@NorthridgeFix I thought I've seen you use that orange see-through tape in the past for some jobs.
No fix, no charge.
And what now? You are waste of time or customer need pay that? Becouse you are lost your time and ....
Neko iz Mase it’s all part of the business.... customer service. It’s not all about the money. Expecting to have a returning customer.
@@albertosequeira8759 The customer is a business and in for the long run. We do charge a repair attempt fee depending on the device being worked on and specially if the device has been tempered with before it came here. We did not charge the customer for this one.
NorthridgeFix Yes, I agree a charge should be applied with a previous repair attempt. Best regards, and be safe.