Finally,, thank you for this Awesome Video Tutorial, but i wonder. what if my amp doesn't have a trs input for footswitch. i use MT100 bttw. thanks again
Can you branch off inside the gt1000 with your real tube amp sound and effects to an ir into front of house while still using your real cab?. So you can do FOH and real amp and cab with all the same effects simultaneously
Awesome vídeo! The Silver Jub sounds fuckin' awesome! Does the Gt-1000 has any amp that can sound near close to the real amp? Cheers from Portugal 🤘🍺🇵🇹
Hi Dave, how are u? Please consider changing the name of this video, I put gt1000 in UA-cam search and couldn't find it because of the symbol - It is likely that other users will not be able to do it either and you will have fewer views. I'm no expert, but I wanted to share what happened to me and maybe it will be useful to you. Maybe adding gt1000 without the script is enough 😊
Hey mate. You obviously did find the video, so that’s good. I will add BOSS, good call! The dash is in most of my titles, & loads of other peoples & it doesn’t affect my searches. Cheers for the feedback. Hope you’re enjoying the content.
I am seriously looking at the gt-1000 at the moment. As far as 4 cable method goes, will this work well with most amps that have an effects loop or will some work better than others? I am looking to pair with either my Marshall Origin 20, or picking up something new to use with it. Either a Laney Lionheart Foundry Super 60, or Boss Katana. Liking the idea of the Laney, because that would be me a unique preamp I can use.
Setting up my EVH Stealth with the GT 1k core in 4cm.. Attempting to find unity gain level (using my daw through the attenuator). Plugged directly into the amp i leveled it out at a perfect -12db. When I introduced the GT into the signal in 4cm with zero effects blocks engaged (except for the send /return block). My levels are spiking above +10.. It sounds horrible. I have the sends and returns set to 100 but lowered them to 20 on each side which still clips but sounds even worse with cut outs and signal drops. What am I missing?
I want to love the GT1k Core. I love its features, but have had horrible issues with noise and degradation of signal using it in 4cm with my EVH Stealth. As soon as I engage the loops it gets a loud high pitched whine and terrible noise added to the signal. It isn't gound loop. It doesn't happen if I run direct from the core's output into the front of the am- only with the loops engaged. Built in noise gates don't help. Odd thing is if I add a mastering fx block (only works on the rock setting) then all that noise disappears. I gooogled the problem and I'm not the only one - the forums were filled with people with the same issue. I want to love it but if I can't figure out and fix the issue
Hey man. Sorry to hear you’re having issues. Without actually looking and seeing what’s going on it’s hard to tell, but I’ll throw a few suggestions at you. - Do you have the cab sim turned off? Do this by going to the output and change from ‘Recording’ to an appropriate option. - Adjust the output level in settings. - Check the amp block is turned off. I have a GTCore as well. I’ll try mine in 4CM over the next few days and see if I can find out what’s happening. 🤘🏼
@@DaveWebbMusic awesome Dave, thanks for responding. I am set to recording, speaker sim disabled. Output level is -10 and amp block disabled.. with all blocks off in a patch I have no problems.. if I add an FX loop I get what sounds like feedback and noise and an 8db volume increase. The thing that is really odd is the mastering fx block set to rock corrects most of it except a slightly noticable degradation of the overall sound. I took some videos. I'll try and upload to UA-cam this weekend. I'm advanced, do rig builds, make my own cabling and never had such an odd issue which seems specific to the core.. which I would absolutely love and embrace in every way not for this issue. If you Google the issue it's been common for at least the last 4 years with many in the tech forums. Surprised there hasn't been a yt video about it and possibly a fix. .. Keep rocking.. you do awesome content.
@seanmichael8411 ok, so you don’t want it set to recording. You need it set to one of the other amp/cab combos. I reckon that’s going to be the fix for you. Thanks for the kind words, glad you’re enjoying the vids. As I said, I’ll still plug in and have a look. Let me know how you go!
I thought you were going to plug that 5th cable into the Fx loops send 2 to send to the input of a second amp. If you did that and this it would be 6 cable method 😊
Super helpful! Was able to use the 5CM on my Rockerverb and now I'm off to the races. Thanks Dave!
Yeahhhh, thats the vídeo i asked! Thanks! Im working but i will watch it when i can and i will comment. Thank you so mutch!
Cheers from Portugal 🤘🍺🇵🇹
Really cool vid dude ... except my brain hurts ... 🤘😎 Rock on Dude !!
Haha I know the feeling.
Awesome vid mate!! Will have to grab cable and get you to show me how to set up with TAE!!
Finally,, thank you for this Awesome Video Tutorial, but i wonder. what if my amp doesn't have a trs input for footswitch. i use MT100 bttw. thanks again
4Cm is my go to since my head is a cheap crate and only use its power section. All my sounds are the GT-1000
But this is great info!!!
Even though I have a core :) I have a Tera echo plugged into its loop :) it’s one of those pedals that’s good to have instant hands on
Awsome 👍🎼🎶🎸
Could you use your amp as a power amp by just plugging the output of the gt1000 into the return loop? Would you need to change anything doing that?
Can you branch off inside the gt1000 with your real tube amp sound and effects to an ir into front of house while still using your real cab?. So you can do FOH and real amp and cab with all the same effects simultaneously
You can. You could set up a rig in 4 cable, while have a second out with IRs.
Have been watching your videos lately as I have the 1000Core. Currently trying to incorporate this with my BF Super Reverb, but it has no effects loop
Awesome vídeo! The Silver Jub sounds fuckin' awesome! Does the Gt-1000 has any amp that can sound near close to the real amp?
Cheers from Portugal 🤘🍺🇵🇹
With a bit of tweaking you’d come close.
Personally I like the X-Mod Amp, but also the Brit Stack or the Supreme amps could do the trick.
Can i set the main output to "OFF"? What happens then?
Hi Dave, how are u? Please consider changing the name of this video, I put gt1000 in UA-cam search and couldn't find it because of the symbol -
It is likely that other users will not be able to do it either and you will have fewer views. I'm no expert, but I wanted to share what happened to me and maybe it will be useful to you.
Maybe adding gt1000 without the script is enough 😊
Add boss too 😂
Hey mate. You obviously did find the video, so that’s good. I will add BOSS, good call! The dash is in most of my titles, & loads of other peoples & it doesn’t affect my searches.
Cheers for the feedback. Hope you’re enjoying the content.
@@DaveWebbMusic Yes, I used your video to connect my laney irt studio to the gt1000 and it worked fine. Thanks and greetings 🙂
Add beer instead! 🍺😋😂🍺
I am seriously looking at the gt-1000 at the moment. As far as 4 cable method goes, will this work well with most amps that have an effects loop or will some work better than others? I am looking to pair with either my Marshall Origin 20, or picking up something new to use with it. Either a Laney Lionheart Foundry Super 60, or Boss Katana. Liking the idea of the Laney, because that would be me a unique preamp I can use.
If an amp has an fx loop, you’re good to go. 🤘🏼
I absolutely love my GT-1000
Setting up my EVH Stealth with the GT 1k core in 4cm.. Attempting to find unity gain level (using my daw through the attenuator). Plugged directly into the amp i leveled it out at a perfect -12db. When I introduced the GT into the signal in 4cm with zero effects blocks engaged (except for the send /return block). My levels are spiking above +10.. It sounds horrible. I have the sends and returns set to 100 but lowered them to 20 on each side which still clips but sounds even worse with cut outs and signal drops. What am I missing?
How to use on a dsl40cr? There are 2 channels. And every channel have 2 settings. Thanks in advance.
Hey. Any idea what to do for amp ctrl for a fender supersonic combo? The footswitch is 4 way and is 7 pin.
great video mate I've been wanting to try 5CM for a while now but just didn't know how to start.
I want to love the GT1k Core. I love its features, but have had horrible issues with noise and degradation of signal using it in 4cm with my EVH Stealth. As soon as I engage the loops it gets a loud high pitched whine and terrible noise added to the signal. It isn't gound loop. It doesn't happen if I run direct from the core's output into the front of the am- only with the loops engaged. Built in noise gates don't help. Odd thing is if I add a mastering fx block (only works on the rock setting) then all that noise disappears. I gooogled the problem and I'm not the only one - the forums were filled with people with the same issue. I want to love it but if I can't figure out and fix the issue
Hey man. Sorry to hear you’re having issues.
Without actually looking and seeing what’s going on it’s hard to tell, but I’ll throw a few suggestions at you.
- Do you have the cab sim turned off? Do this by going to the output and change from ‘Recording’ to an appropriate option.
- Adjust the output level in settings.
- Check the amp block is turned off.
I have a GTCore as well. I’ll try mine in 4CM over the next few days and see if I can find out what’s happening. 🤘🏼
@@DaveWebbMusic awesome Dave, thanks for responding. I am set to recording, speaker sim disabled. Output level is -10 and amp block disabled.. with all blocks off in a patch I have no problems.. if I add an FX loop I get what sounds like feedback and noise and an 8db volume increase. The thing that is really odd is the mastering fx block set to rock corrects most of it except a slightly noticable degradation of the overall sound. I took some videos. I'll try and upload to UA-cam this weekend. I'm advanced, do rig builds, make my own cabling and never had such an odd issue which seems specific to the core.. which I would absolutely love and embrace in every way not for this issue. If you Google the issue it's been common for at least the last 4 years with many in the tech forums. Surprised there hasn't been a yt video about it and possibly a fix. .. Keep rocking.. you do awesome content.
@seanmichael8411 ok, so you don’t want it set to recording. You need it set to one of the other amp/cab combos. I reckon that’s going to be the fix for you.
Thanks for the kind words, glad you’re enjoying the vids.
As I said, I’ll still plug in and have a look.
Let me know how you go!
I thought you were going to plug that 5th cable into the Fx loops send 2 to send to the input of a second amp. If you did that and this it would be 6 cable method 😊
Excellent!!