For me its mostly pushing untill its time to neaten it up for collection with a couple pulls.. and if I had to guess I'd say scaffolding is for a lighting upgrade 😂
for me it depends on the scenario. if I'm brushing up lots of mess then push is the way to go but if I have got to make smaller movements to pile up less or smaller bits, pull is the technique for accuracy
I've installed RX8 seats in my defender few years ago, and i think it was one of the best upgrades. But switch them to fabric ones, you will get your precious gems if parked in sunny spot, don't ask how i know that :)
I've had these seats in my defender for years, super dooper comfy. However you totally loose access to the cubby hole beneath drivers and access to battery box. Only in the last year have I realised that you can take off the seat base in the passenger side, and it lifts off defender style. Just put the front two bolts of the base back in and its easily removable. For the drivers side, i've made a pivot so the seat whole seat rocks back to allow access underneath. Without these two 'hacks' I'd have probably reverted back to standard defender seats as access underneath can be very usefull!
I've done the same on mine ie replaced the four under seat bolts and just use the two at the front ...but I've used bolts with a wing as a replacement. That way you can finger tighten them - no faffing about with a spanner / socket under the seat.
@mariacanceriwhy are u commenting on all popular UA-cam channels looking for sympathy and subscribers,, these guys didn't build up a channel for you to come along and look for subs
2in by 1in box steel then taper the ends and spray black so looks great . Not sure if you know but you can still remove the base on passenger seat to get to battery box with out having to take seat out. with box 2x1 No need to hit seat with hammer I have done 3 defender this way when fitting rx8 seats plus lifts seat a little higher so will go back more . then wire in heated seats and elec driver movement seat . just like you lads great job rx8 seats in a defender look spot on I think well done
Great video guys. Love the seats, however, I am not sure I could do with the hassle of having to unbolt them every time access to the battery and fuse box is needed. 👍😎
I always Push the broom. I think you should build an elevated platform to increase your storage. Just use bolts on the uprights so you cam take it with you if you ever move to a larger space. with the cost of wood these days it is best to be able yo take it with you when you go. You guys really need to install better lights Cheers!
Push and pull, it depends. If you’re sweeping up the garage push because it’s easier and quicker. If you’re sweeping anything you can’t make a mess with you pull so it doesn’t splash everywhere 🧠 As for the scaffolding, a roll in for a mini mega ramp 100% 🤙🏼🤙🏼
There’s only one way to do “proper job” with a broom and that’s to push it, if you need to change direction then just swing around the pile of crap and push in the other direction. Is the scaffold tower to enable you to install some LED lighting panels? Even though the installation of the seats were a bit of a pain in the ass to do, they look great, I just need to find a set for mine. 😎👍
Got the RX8 seats in mine Well comfier but I’m 6’2 and they’re a bit too high Plus they weigh a tonne which is a pain as I’m constantly having to take the passenger one out to jump start mine as I leave my heated seat on draining the battery I didn’t fit them
To get a 1 year supply of Vitamin D + 5 individual travel packs FREE with your first purchase, go to www.athleticgreens.com/boqer123
The bois at Oakes Garage desperately need to be drinking AG1 😂 I have it everyday at home myself.
Andy calling heated seats ‘batty warmers’ got me 🤣
One of the best Defender channels on UA-cam. Good to see real life mods instead of £100k+ builds.
Andys such a goat man
For me its mostly pushing untill its time to neaten it up for collection with a couple pulls.. and if I had to guess I'd say scaffolding is for a lighting upgrade 😂
Canadian here spotting something I never thought I would see in the UK @ 11:42
Best breaky and coffee around !
for me it depends on the scenario. if I'm brushing up lots of mess then push is the way to go but if I have got to make smaller movements to pile up less or smaller bits, pull is the technique for accuracy
Push until your close to finish, and then pull... preferably leaving the mess outside! Love the seats, the black rotors look ace!
I reckon we need a vid documenting a typical day at work for Andy. You can be his apprentice for the day 😂
What a video this would be
I've installed RX8 seats in my defender few years ago, and i think it was one of the best upgrades. But switch them to fabric ones, you will get your precious gems if parked in sunny spot, don't ask how i know that :)
Andy - “that’s the doughnut from a rotary” 😂
You gotta pull all the dirt when sweeping up 😂
Loved the comment about health and safety whilsy welding right next to loads of cardboard 🤣🤣🤣🤣🤣 love it lads
I love how stuck in Andy gets & how’s he’s always in the drivers seat 🤣
I've had these seats in my defender for years, super dooper comfy.
However you totally loose access to the cubby hole beneath drivers and access to battery box.
Only in the last year have I realised that you can take off the seat base in the passenger side, and it lifts off defender style. Just put the front two bolts of the base back in and its easily removable. For the drivers side, i've made a pivot so the seat whole seat rocks back to allow access underneath. Without these two 'hacks' I'd have probably reverted back to standard defender seats as access underneath can be very usefull!
I've done the same on mine ie replaced the four under seat bolts and just use the two at the front ...but I've used bolts with a wing as a replacement. That way you can finger tighten them - no faffing about with a spanner / socket under the seat.
Can’t wait to see the new lighting and you got to be a pusher man
@mariacanceriwhy are u commenting on all popular UA-cam channels looking for sympathy and subscribers,, these guys didn't build up a channel for you to come along and look for subs
Boq with the smooth jazz in the b-rolls
Bought a hoodie. I really don’t think it can get better quality for the price. Love it
Cheers bud !
Got to love videos on a Thursday
Boqer and a beer while eating dinner. Life is good
Definitely pull! Andy got the old batty warmer seats 😂
2in by 1in box steel then taper the ends and spray black so looks great . Not sure if you know but you can still remove the base on passenger seat to get to battery box with out having to take seat out. with box 2x1 No need to hit seat with hammer I have done 3 defender this way when fitting rx8 seats plus lifts seat a little higher so will go back more . then wire in heated seats and elec driver movement seat . just like you lads great job rx8 seats in a defender look spot on I think well done
Cheers pal! Quick question… drivers side heated seat isn’t turning on. Which wires are they? Can’t figure it out hahah
Great video guys. Love the seats, however, I am not sure I could do with the hassle of having to unbolt them every time access to the battery and fuse box is needed. 👍😎
Push & Pull , But a hoover is better 😂 loving the videos. Need to see Andy sloshed in a drunk cooking
Picking up my Freshly Built D90 tomorrow morning!
You switch between the sweeping when you get tired, and the scaffolding you should make a trampoline drop in. Love the vids dudes.
Love how everyone is just like me and a mix of pull and push depending on what your sweeping. Who knew it was such a fine art 😂
always do both depending on what I'm dealing with and what broom I'm using, gotta adapt to the circumstances y'know
I always Push the broom. I think you should build an elevated platform to increase your storage. Just use bolts on the uprights so you cam take it with you if you ever move to a larger space. with the cost of wood these days it is best to be able yo take it with you when you go. You guys really need to install better lights Cheers!
Thanks for putting me off that man I'm nowhere near as compitent as you guys so I would have a hell of a time!
Definitely a puller and got a felling of a new sign coming along!!!
Another quality episode of Andys Landys
I have RX8 seats in my defender for over 3 years and I think it's the one of the best mods i've made to my car.
IT’s always better to PUSH than PULL!! 😉
Gets rid of the scabbyness quicker!!!
always excited when boq uploads
Definitely a pusher
Good vid boys, 8:30 - Andy you're gonna get Arc-eye real bad if you're looking at the welding like that mate... get some eye protection man
'Idk what Jack's been cutting with that' -boqer
His sills 👀👀👀
Also nothing wrong with a bit of pull and push😉
When you're sweepin' you are for SURE pushing the broom
All about pushing and pulling
Push and pull, it depends. If you’re sweeping up the garage push because it’s easier and quicker.
If you’re sweeping anything you can’t make a mess with you pull so it doesn’t splash everywhere 🧠
As for the scaffolding, a roll in for a mini mega ramp 100%
🤙🏼🤙🏼
I live for that notification😅😂
Outside is push inside is pull 👌
Good pair of batty warmers them lads!
Pull to keep it tidy push to get it done quick 😂
Welding getting better lad 👍
Andy saying ideal for the seal of approval is ideal
Definitely a puller, just like Andy!
that scaffolding definitely for an exterior roll cage🤣🤣
There’s only one way to do “proper job” with a broom and that’s to push it, if you need to change direction then just swing around the pile of crap and push in the other direction. Is the scaffold tower to enable you to install some LED lighting panels? Even though the installation of the seats were a bit of a pain in the ass to do, they look great, I just need to find a set for mine. 😎👍
Big pushes and then pulls for precision
My old man says ALWAYS push when you're sweeping. Good enough for me.
Depends how dirty that floor is. Also the scaffolding is to build round the land so it doesn't get nicked!!!
8:37 is Andy looking at the weld!
Eyes closed
I’m definitely a pusher man as I push the mess into a pile so I don’t have to clean it up😂 cheers boys, seats are proper cool too!
I’m a puller for the same reason you have the scaffolding. So Andy can get a little lift to reach the ladies😂😂
Best thing I did to my 110 - install RX8 seats. Electric and heated? I'll take it
Pull the broom to keep the dust down. And I recon the tower is going to be used to get in and out of the Landy once you fit a mental lift kit
push for power , pull for precision ;)
Pull around walls, push on open floor 👌
Lighting going up in the unit
Push, pull, push, pull creating multiple lines for Henry the hoover to get of his chops
depends on the broom I say, big broom? push, small broom? all pulling. Scaffolding though is probably for some mad lighting in the shop!
When sweeping up I use both, love the videos btw
Just depends on the brush them hard bristle ones are a push kinda job and the soft ones you need to pull it or it leaves the Marks in the ground
Pull the broom it collects more dust and do not leave the dutty trail behind 👍🏻
The scaffolding pipes are definitely for e36 compact roll cages and exhausts 😂
Depends on the broom sometimes push is easier sometimes pull is preference is push tho
I do a mix of both, pushing and some pulling.
Correct answer
@@boqer123 correct answers win a beanie
For the question, I usually push but I do pull if I'm sweeping things out from under a table or something. I PULL SOMETIMES OK
when im brushing up i usually push because you get that sweet flick if you've got the right bristles but i pull for the accuracy
Andy’s loom band table
Wish there were more uploads, it’s like one a month. Absolutely love the videos tho!
Please please do a series on building and entering Red Bull soapbox!! With You, Andy and Stu!! I think I would decease from laughing
Always pull the broom around the edges of the room then push!
Can you tell me how much do the seats folded forward. I’m thinking of putting them in my 90 defender. Hopefully to sleep in the back.
Push if you got loads to brush up or pull for the detailed sweep
Neither, I ninja spin that broom like a staff! Shit flying everywhere!
Defender is looking great!
Would count myself a puller, also yay for Andy video 🙂😛
New lighting for the scaffolding I reckon 🤔
Can't beat abit of pulling😂
Scaff for putting up a BQR HQ sign I reckon
Have to pull the broom makes life easier cause you bring the dirt with you 😅
With the scaffold tower, I reckon your doing some upgrading in the unit
Man! I'm nearly 30 so these heated seats are a must 😂
1-I push
2-your doing better shop lighting
push if its going off something like a deck. pull if you are wanting to make a nice little pile 😃
Always push the broom, avoid the dust in your face!
Love the beanys!!
For me it’s deffenitely push and then pull at the end. Just before I sweep everything under the oven. Probably painting the inside of the shed
It's got to be a pull to get decent down force on the broom!
If you push instead of pull when you're brushing, you're a monster.
Got the RX8 seats in mine
Well comfier but I’m 6’2 and they’re a bit too high
Plus they weigh a tonne which is a pain as I’m constantly having to take the passenger one out to jump start mine as I leave my heated seat on draining the battery
I didn’t fit them
I knew I’d always leave them on by accident that’s why I wired them to switched 12v 😂
When brushing up you push it away from you so you don't get dust on your feet/legs. 😁
no time to be playing on your phone, you've work to do! 2:15
all depends of the broom !! some don't like to be pulled, and some love it. normally stick to pull though
you win the beanie! Drop us an email - support@boqer123.com and we'll get your address x
@@boqer123 wow thank you !
Depends whether it’s a push broom or a pull broom tbf
Serious question - i need to replace the seats in my Defender - im a big guy - do you lose any space between the steering wheel or height wise?
Pull always so you make a neat pile
I do both... gotta get the debris all in one place somehow