How To: Take Apart A Blower Motor And Wheel For A Repair
Вставка
- Опубліковано 11 жов 2024
- Step by step walkthrough on taking apart a furnace or air handler blower housing. Some parts might differ between manufacturers but the steps are the same.
Follow us on Instagram at:
worldofhvac
Check out our store at:
Etsy.com/shop/worldofhvac
Let me know if there are any topics that I can cover for you!
this guy reminds me of chris the car guy. straight to the point, clear and helpful thanks bro
No problem!
Thanks man, helped me out a bunch, had a bad wheel, rusted up, and was vibrating.
Glad I could help!
Nice video... Straight to the point and no BS!
Definitely helped me out. I just need to find where to buy the motor
Google the model number and you should be able to find it. Repairclinic.com is very reliable
Are those squirrel cages repairable? How do you know when it's gone bad? I mean aside from it being noisy. Aren't they always noisy and just vary between being noisy and noisier and eventually noisiest? Thanks for the video...straight to the point! Except this was more about replacement vs. repair no? Again, thank you.
The cage itself is not repairable. You can try to bend it and balance it but a new squirrel cage is between $35-$60. If you're having issues its easier to just replace the wheel with a new balanced one.
Master!!
My inside unit is making a low/deep banging sound (like a constant, medium pace bang on sheet metal) the sound is near where the squirrel box “blower” is located. Any advise would be greatly appreciated!
Turn it off and wait till it stops. Reach your hand inside the blower and see if paper or insulation got sucked into the wheel. You dont have to take it the blower out to do it. Just make sure it's off
@WorldofHVAC,
Great video, @WorldofHVAC. I did almost exactly that but now I have a bit of vibration. The wall adjusent to the blower motor assembly is slighly rattles. Before placing wheel back i spun the wheel by hand and it was not perfect spin. It was a little off . Any thoughts? Is it motor shaft is bent or wheel?
Assuming the motor is centered, if the wheel wobbles when you spin it by hand the wheel is off balance. I have bent it back into alignment (the best i could) and that helped. If that fails just try and get a new wheel. They are $30-$50
@@WorldofHVAC how do you i bend it into alignment? Just pressing manually on wheel while assambled? What website do you recomend to buy a wheel? I see them up to $200. Unit Model # FX4DNF049.
I have a Comfortmaker PGS442090KGP01C and was wondering if I can just remove the blower wheel by following your steps to sand the motor shaft and then remove the set screw and pull it out for cleaning. I would rather not have to remove extra stuff if I don't need to do so.
You can try but that wheels not coming out with the shaft through it. You don't have to take apart the motor if you just want to clean the wheel
Mine is making a screechy rattling noise. Don't trust myself to take it apart if it's something I can do with unit still on. I'm thinking it's just hitting against something but I'm not sure
A screech sounds like the bearing are bad and you need a new motor
Looks identical to mine. Issue is having is after flame ignites but before you hear the blower kick on you hear this thunk sound one time then one more time after it kicks on then no more the rest of the time. Sometimes louder than others, it’s 100% coming from that blower and wheel but it kinda sounds like it is rubbing real quick sorta thing. Maybe out of balance? Any idea?
Is it an ecm motor? I've had that board on top give me issues like that. Or the bearing inside are starting to go out
What's the issue with using a convex blower wheel vs concave? thx
I've never seen a convex blower. The concave design is meant to scoop the air. Ive seen those cups get so clogged with dirt they flatten out and struggle to move air.
Typically convex is for shorter shafted motors, there’s not a huge difference
I have a RUUD furnace UGDA-125A-GR I can't find a blower motor. Any suggestions.
Ruud is a very common brand. Acme or coburns can look up the model number. They probably have it in stock.
You can take the blower out and get the model number off of the tag.
Let me know if you need more help
Took mine out, the motor had slipped Out of the housing groove. How do I keep this from happening again ?
The belly band?
Howvdo I identify the wheel? I have a part number but nothing comes up online.
Search the model number of your unit and look for the wheel from that. Repairclinic is your best bet
where can I buy that blue wheel puller tool., thanks
So that model is really old. I would recommend the updated version. I'll attach a link for the newer one I recommend.
Sensible Products UP-1 Ultimate Hub Fan Blade Blower Wheel Puller www.amazon.com/dp/B001CGFQDW/ref=cm_sw_r_apan_i_KNSJGSXQ5FEB4H2CFT31
@@WorldofHVAC Just a thought, how much does the removal tool cost compared to a new blower wheel ? Oh.....I looked it up. A new blower wheel like seen in this video is about three times more expensive than the removal tool.
One criticism that I have of almost every video on the Internet. You are mirror flipped, so when you say righty-tighty, leftie-loosie, you are APPEARING TO BE turning to the right to loosen. Follow? Then when you held up the WD40 can I was certain. You just might confuse somebody that doesn't have a lot of experience wrenching.
I couldn't even keep looking at the video after seeing that gang flag in the background.. Im out ...
Wow. Yea this isn't for you
suggestion, remove that BS flag before you try to educated us.
Nope. Enjoy it
i have shaft play in the motor, (back and forth) not side to side. is that repairable?
What kinda tool was that to take the blower off
The Force fan puller. If I had to buy it again I would go with the Ultimate puller
amzn.to/3LoxqFc
@@WorldofHVAC thank u
No problem!