How To Remove and Clean a Blower Wheel

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 71

  • @NeoEon
    @NeoEon 9 місяців тому +16

    Four companies gave me four different proposals ranging from 3,000, 4,000, 5,000, 7,000 George Washington's for cleaning evaporator coils and blower fan. I did both with all tools and your help and other channels help for 400, plus replaced my capacitor and cleaned my condenser unit. 10 up to 17 times less money. Fuel locally is 10 miles for all of them, labor in Florida is low, nothing above 20 bucks for techs as of 2024. I could see charging people 600, 700 or 800, but these companies over charge. Thank you, I consider you a real worker's hero.

  • @justoalma9585
    @justoalma9585 2 місяці тому +5

    Been a technician for 33 years. Please homeowners, before to disconnect of take something apart. Take pictures with your smart phone please. This will help you very much if questions come up during the reassembly process of where things go.

  • @akim2007p
    @akim2007p Рік тому +14

    Thank you for details. I got a quote for 3k$ to change blower motor, capacitor and clean up blower fan. I was sure I can do it myself and your video help a lot. Ordering parts now. Thanks!

    • @pcollenyt3683
      @pcollenyt3683 Рік тому

      Why change the blower motor ? Is it defective or not performing ?If the fan is very dirty , that can but a strain on the blower motor. But cleaning the fan blades should remedy that.

  • @Warthog0129
    @Warthog0129 7 місяців тому +6

    Thank you so much! Ours needed to be cleaned and the service company quoted me 600 bucks. thanks to your video i did it in maybe 45 minutes and now i know how to do it for the future!

    • @russcobb1403
      @russcobb1403 6 місяців тому +2

      Removed blower motor/fan removed blower from motor then cleaned squirrels, in 45 minutes! Plus assembled and reinstalled,?

  • @EvilRiG
    @EvilRiG Рік тому +4

    I just cleaned my furnace motor and blades, it was soo dirty! your video gave me the confidence to clean it myself and it was very easy. Thanks a ton!

  • @Time-Trvlr
    @Time-Trvlr 5 місяців тому +1

    This spring I decided to check and clean my blower wheel in this 16 year old home. I knew that when it was manufactured they did not provide a inlet / return filter because I swapped the return vent with one that caged a filter. When I got the wheel out it was overwhelmingly evident that the interior house painters ran the system when painting. It was coated with cured paint the same shade as my walls. After unsuccessfully by trying many heavy duty cleansers to soften the paint on the blades. I used unscented heavy duty oven cleaner and several hours letting it sit to get a brand new shine with my water hose and a jet nozzle.

  • @marcusdarnell3348
    @marcusdarnell3348 Рік тому +3

    Great video! What is the best way to clean the condensate trap connecting to collection box on 90% gas furnaces?

  • @joehead1294
    @joehead1294 Рік тому +9

    Hope you don't mind me asking, what was the reason for r&r/clean the blower wheel? Was it requested by customer or done to cure a problem? Unit looked to be in pretty good shape overall.

    • @CARMENARDINO
      @CARMENARDINO Рік тому +7

      The blower wheel clogs with dust, decreasing the amount of air it can move. If you have a bathroom fan a few years old, pull it down it's probably 50% or more clogged.

  • @STS4747
    @STS4747 8 місяців тому +3

    just started at my first ac company a couple months back after graduating. I’ve seen it done before but I haven’t done it my own I feel a little less nervous. Thank you 🙏

    • @Rabbitzblue
      @Rabbitzblue 7 місяців тому

      Good luck bro. I haven't done one yet on my own either.

    • @TitaniumTurbine
      @TitaniumTurbine 5 місяців тому

      If you guys are in Florida, you can come over and practice this on mine, no pressure. Lol That sounded like such a boomer thing to say… Sorry for that but congrats to you both on graduating! Best of luck out there.

  • @waterboggle36
    @waterboggle36 11 місяців тому +1

    So what do you do in the winter time -40 C?

  • @matthewknezich1403
    @matthewknezich1403 Рік тому +6

    If you could please provide the exact name of the coil cleaner you used and sprayer? Maybe an Amazon link? I have had blower wheels that would not clean with a brush easily, this coil cleaner you used looks like it did a nice job, looks like new. Would think this would be a nice promo for the cleaner you used. Wondering how well it would work on really dirty wheels and would they need to be brushed? Would this stuff work on plastic wheels like mini splits or does it have to react with metal?

    • @omarious
      @omarious Рік тому +1

      Use triple D coil cleaner

  • @TheLovey22
    @TheLovey22 3 місяці тому +1

    I’ve been experiencing issues with my HVAC filters bending and creating air gaps, allowing dust into the house. I've already tried switching back to more restrictive filters, but the problem persists. Could a dirty blower be causing increased suction or airflow issues, making my filters bend? Would cleaning the blower help resolve this?

  • @FloatLikeButter
    @FloatLikeButter 3 місяці тому +1

    How can I find out what size motor and blower wheel I have?

  • @thecreativehuman75
    @thecreativehuman75 2 роки тому +4

    I really enjoyed that and I learned a lot.
    Thanks!

  • @bretthl1
    @bretthl1 8 місяців тому +1

    Isolate (turn off) the electrical to the furnace?

  • @KevinD21
    @KevinD21 5 місяців тому

    This was an awesome video! I used it to replace my blower wheel, which had torn itself up. Thank you!!

  • @RC-Heli835
    @RC-Heli835 9 місяців тому +2

    That was lucky on the fan pulling! Mine won't budge!

  • @nilbertocohen4963
    @nilbertocohen4963 2 роки тому +2

    What type of cleaner did you use? Evaporator coil cleaner?

  • @CanadianBi-WeeklyInvestor
    @CanadianBi-WeeklyInvestor Рік тому

    Curious if this would help my furnace problem.... Not sure if it is related but I got a duct cleaning in my house this summer (10 year old house) and i noticed this fall that when i am raising the temperature of my house in the morning the furnace cuts heating before it reaches desired temperature 67f to 72f.
    When the furnace cuts out the fan continues running and then eventually kick the burners back on. When this happens it does have a orange flash of 4 blinks quickly.
    I wonder if its a air flow issue and when i got the duct cleaning some debris got into something, or its a completely different issue

  • @CircleTakesSquare
    @CircleTakesSquare 5 місяців тому

    List of the attachments you used for the Milwaukee Drill plz.

  • @360Mike
    @360Mike 9 місяців тому

    Was the igniter sparking at 2:45? Did you forget to shut off the power?

  • @canuck-guy2384
    @canuck-guy2384 6 місяців тому

    I live in a modular home with a counter-flow furnace in a closure. I started this because it said I had a limit switch issue. One of the other issues is a dirty coil above the burner. I have a dirty coil! How do I access and clean the blower and coil? Help!

  • @Marc_B.
    @Marc_B. 5 місяців тому

    My blades have a lot of rust spots all over the blades. I rinsed and used fan blade cleaner. Lots of dirt came off, but still this rust or rust like stuff will not come off. What should I do?

  • @hvactechwanttobe1499
    @hvactechwanttobe1499 2 роки тому +8

    You did this like a professional

    • @dporrasxtremeLS3
      @dporrasxtremeLS3 Рік тому +2

      As Good as it Gets! Josh! Thanks!

    • @HVACTechTips
      @HVACTechTips  9 місяців тому +7

      That's because I am 🤣

    • @TitaniumTurbine
      @TitaniumTurbine 5 місяців тому +1

      @@HVACTechTips Ahhh that seems to answer a few things here. 😂

  • @lebenek.5806
    @lebenek.5806 Рік тому +1

    Hello whaat state are you in please & what HVAC company are with if you can disclose... Is there a HVAC company here in North Texas that would offer sich a service that you know of? My husband & I have our😮 because we have never seen or known of anyone offering this service. It would have saved many a units from being changed. My fan motor ran out over the weekend & they changed it out without cleaning out a 30 yr old blower drum! So what do you think happened again?? The new fan motor burnt out locked up again less than 24 hours after it was replaced! I only saw your video afyer the fan motor was replaced 😢. I am so sad & grateful grateful at the same time for sharing this well guarded maintenance secret four our HVAC's. Keep doing good. Thank You!

  • @raypalmer1976
    @raypalmer1976 3 місяці тому

    Depending on your setup . You don’t always have to remove wires . Some you can zip tie the board to the side out of your way and slide the blower out .

  • @jeffsutton3583
    @jeffsutton3583 Рік тому

    Is the fan itself directional, the squirrel cage

    • @tylerparker3024
      @tylerparker3024 11 місяців тому

      All fans are directional thats how they work. Just pay attention to the way it is when you take it out and put it back the same way

  • @grntchstrmdws
    @grntchstrmdws 6 місяців тому

    This is helpful, but the component that is really filthy that I'd like to know how to clean is the coil, just above the fan.

  • @PlumberGuy-ez9wx
    @PlumberGuy-ez9wx 7 місяців тому

    So I went to do mine and there's screws that hold the blower up, cheap aprilaire furnace. So I cleaned out the box as best I could and left the fan alone. I guess I'll be replacing the whole thing soon

  • @spiritdetective85
    @spiritdetective85 7 місяців тому

    I needed this. Thank you!

  • @chesstime356
    @chesstime356 2 роки тому +2

    Very nice work

  • @angelicaalexander3041
    @angelicaalexander3041 11 місяців тому +1

    Awesome video.

  • @mikepatel6323
    @mikepatel6323 Рік тому +1

    Great Video. Thanks.

  • @Kevin-g3g1v
    @Kevin-g3g1v Місяць тому

    My furnace sends hot air for one room and cold air for other 2 rooms. I changed the filter. The problem is still there. It also makes long and loud noise, woo~~woo~~~ I think the blower need to be cleaned and apply some 3in1 oil.

  • @MaMa-qh4dy
    @MaMa-qh4dy 2 роки тому +2

    Good one. Thank you

  • @beachwave2
    @beachwave2 Рік тому +1

    Thank you. Great video.

  • @ronj9448
    @ronj9448 Рік тому +1

    What level of work is this? For a yearly checkup, they never did anything like this on one of my units.

    • @HVACTechTips
      @HVACTechTips  Рік тому +4

      Hey Ron. So on a maintenance visit, I typically just inspect the blower wheel and recommend cleaning it for an additional fee. If they want me to do it and I have time I'll do it while I'm there but if not, we'll schedule it for another day.

    • @ZIXTRIX
      @ZIXTRIX Рік тому +2

      @@HVACTechTips how much do you charge for cleaning if it’s not a secret ? Thx

    • @CPgoogle619
      @CPgoogle619 Рік тому +3

      I was quoted 425

    • @YTDreezy
      @YTDreezy Рік тому +2

      Damn I just cleaned one today for $250

    • @YTDreezy
      @YTDreezy Рік тому +1

      Also this video helped me do it lol

  • @dunrobincourt
    @dunrobincourt Рік тому +1

    Good info, thanks. B

  • @kennyg3192
    @kennyg3192 Рік тому

    Brother, I’m from Baltimore Maryland. I’m a plumber I know I can do it I’m petrified. I don’t know why because I know I don’t have the money to replace it right now. If I do break something you know everybody says it’s just a motor it’s just wiring well I know what wire in the wrong way does I’ve seen what people do with Multi split units and burn them up because they wired them the wrong way, I had a company called DeVier came out and serviced my system said they did a full maintenance but yet they never did that never took it out and cleaned it. They sealed all my docs, sealed my return system and sealed the problem.😮😮 what would be the best thing for me to do as a plumber should I try my hand and take it apart or should I call Friend and have that fan housing clean because other than that my system is running perfectly I got all the readings from them from last time when they came out in March of this year so my system is only one for April out in May. My systems always turned off in May. I don’t run my air condition and I just turn my heat back on in November. I don’t think they did a good job at all. Can you explain to me sir it’s a tuneup and maintenance and a gas machine for system has or has not been cleaning that furnace wheel or blower wheel part of it.???so is it covered in a maintenance check up

  • @mnmurph
    @mnmurph 5 місяців тому

    Can't i just put it in the dishwasher??

  • @digitalliquid5159
    @digitalliquid5159 8 місяців тому

    Pulls wheel out at 7:00 -7:30

  • @myname2263
    @myname2263 8 місяців тому

    Stop at Dollar Tree , Grab that yellow can of over cleaner . Spray on and let it sit for a while . Blower wheel will look brand new !

  • @hotfeva9843
    @hotfeva9843 Рік тому +3

    I use an air compressor

  • @mikai13
    @mikai13 6 місяців тому

    👍👍👍👍👍

  • @tillerdogg3232
    @tillerdogg3232 11 місяців тому

    Them blades will slice you up

  • @paranoidparanormal376
    @paranoidparanormal376 Рік тому

    u aint gotta take all that stuff apart just water gose it and wait for it to dry any electronic will work if u let it dry throw a tv in a pool and let it dry it will work still

    • @foxtrotproject
      @foxtrotproject 4 місяці тому

      No. Absolutely do not ever let the blower motor get wet.

  • @10YearOldTom
    @10YearOldTom 5 місяців тому

    Let's be honest though, that wasn't going to change anything. Nice video of the labor involved, but some 52 year old is going to think this will fix his leaky system