Why are you guys worried about dyno results for a CAI in a normally aspirated engine? You don’t install a CAI for more horsepower…come on man. If you are expecting it to make the car “faster” you’re looking in the wrong place. You’d get this because you like the sound…
Actually on the contrary. There's no magic to the hours of R&D that goes into each and every intake, and our dyno results are straight off of the dyno computer. We don't even go and recreate them in a color scheme that fits the brand better. All of that is just to show that we aren't faking these results. Sure, without a tune you're looking at 11HP. But that opens up a ton of headroom for when you get an exhaust and a proper tune done. There are always people that will buy for the sound alone, but you can't fake facts and it does make more power. I hope you have a wonderful day and as always, #staytuned.
@@InjenTechnology lol yeah right, 11 wheel horsepower from a hot air intake. These 2gr engines only gain 20-25whp from a full exhaust with PPE headers.
I love this video, mainly because I have the exact same GS and I plan to make at least 350whp. Got anymore stuff to help me push it close to that or maybe even more?
I wouldn’t put that on my car even if you paid me. you have to reprogram your computer to except the intake changes it will probably be more expensive than the intake,so not worth it🤦🏽♂️
@@cgamble30 Respect your opinion but you are wrong about everything you said. LOL sounds great all lights off after a few starts computer updated itself. Perfect!! Loooouud!! 🙏🏽
I suffer alot with Takeda intake. It shock the engine due to massive air gets inside in comparison to the fuel ratio. It cause a rapid cut-off or acceleration pause when accelerating hard when the RPM reach 5-6. Unfortunately. I ended up selling it with less than half of its price
what was the point of showing dyne runs with no results?
Stock: 254.34 hp / 232.22 ft-lbs
With Injen Intake: 264.39 hp / 241.40 ft-lbs.
Source: injen.com/pdf/184517
@@thinkbinary6729 bullshit results
@@thinkbinary6729 you really gonna believe Injen wit those numbers??..thats basically a marketing tool
@@showstoppa01 I didn't say that I trust those numbers. I just answered Rene Ledesma's question...
My toxic trait is thinking that since this video is 11 minutes long I could do this in 11 minutes 💀
So what were the dyno results?
Literally says in the video.
@@sauronjr9601 that’s what it says on the box it came in 🤭.we are referring to the dyno values before and after the intake was installed.
@@cgamble30I ain’t see the dyno results
Why you edit out the dyno results lol
Why are you guys worried about dyno results for a CAI in a normally aspirated engine? You don’t install a CAI for more horsepower…come on man. If you are expecting it to make the car “faster” you’re looking in the wrong place. You’d get this because you like the sound…
Actually on the contrary. There's no magic to the hours of R&D that goes into each and every intake, and our dyno results are straight off of the dyno computer. We don't even go and recreate them in a color scheme that fits the brand better. All of that is just to show that we aren't faking these results. Sure, without a tune you're looking at 11HP. But that opens up a ton of headroom for when you get an exhaust and a proper tune done. There are always people that will buy for the sound alone, but you can't fake facts and it does make more power. I hope you have a wonderful day and as always, #staytuned.
@@InjenTechnology lol yeah right, 11 wheel horsepower from a hot air intake. These 2gr engines only gain 20-25whp from a full exhaust with PPE headers.
Show the actual numbers before and after
Yep. Show the sheet. An increase in HP at 6k RPM doesn't mean much. What are the gains(?) at all the RPMs?
On the corner almost at the end ,it said that it went up 11HP 10ft of torque . I was disappointed to see such a little different.
Under normal conditions you wouldn't be driving with your hood open. That has to be a factor also with the net results
@@zerimar6970 10hp is pretty good actually
I love this video, mainly because I have the exact same GS and I plan to make at least 350whp. Got anymore stuff to help me push it close to that or maybe even more?
We both know why you didn’t show the dyno results
Is there a concern of the quality of the filter and long term effects on the engine?
What's that piece called at 8:30? Vibrant mount? Mine broke.
I didn’t see the dyno results, but I did hear lots of noise🤷🏽♂️
Nice video bro. Did you happen to get TRAC OFF and check engine light with lean code after intake install? I cant figure this out.
I wouldn’t put that on my car even if you paid me. you have to reprogram your computer to except the intake changes it will probably be more expensive than the intake,so not worth it🤦🏽♂️
@@cgamble30 Respect your opinion but you are wrong about everything you said. LOL sounds great all lights off after a few starts computer updated itself. Perfect!! Loooouud!! 🙏🏽
@@cgamble30 You don't have to reprogram it
@@cgamble30 you have to disconnect the batter before installing it that basically allows the ecu to relearn the intake
Do you have any for a 2007 GS 350?
Supposively the 98-05 model intake works with our cars with a bit of modification.
How do get the heat shield because mines didn't come with one do not want the universal one
I need one for my 2013 Es 350 I can’t find one I want it made from your company is this something you can do for me ??
Do you have to dyno this or anything after install?
Where could I find one of those intakes for the is250/350s ? Please and thanks ....
will this work on a 08 350?
Do you have to disconnect the battery before install??
Nice video 👍🏾
can I use this for my 2015 Lexus gs350 f sport AWD
Yes
I suffer alot with Takeda intake. It shock the engine due to massive air gets inside in comparison to the fuel ratio. It cause a rapid cut-off or acceleration pause when accelerating hard when the RPM reach 5-6.
Unfortunately. I ended up selling it with less than half of its price
You know you could of tuned your car and would ran better and add more power
@@lexusis350toyotamade3 I didn't find practical to tune a car for just air intake
Would the same happen with the injen ?
@@Mr.Helper. i don't know. That's why I'm hesitating to repeat this experience
You should try HPS intake tube w/ K&N filter. It’s a good combo I haven’t had any weird issues after install.
Will this work on ES350 being front wheel drive and possible drivetrain issue?
That's what I've been trying to find out also. What can we do to the es350
The ES intake is different you can still install one, you buy the correct one
Does it fit the ES350?
No bro
10:44