Man I’ve got a 91 z71 I put my heart and soul and throw money at to no end. I’ll never part with it. I appreciate you and your truck. Stick it out till yours is yours. Every last piece and no other is that one
You're a life saver!! Wasn't sure if this was the problem or not but that disconnecting tip proved it was and now I can at least drive to go pick up the part! Thanks a bunch!!
I have a 2001 Chevrolet Silverado and I back in the my driveway and I backed up a little bit to far and I went to put it in drive and it wouldn't go down in drive and want go in park but I can crank it up in nugle and It want down in drive?
Thank you, thank you, thank you!! I’ve nearly ripped my shifter off in full fury because of this little crapper! I did exactly the same as you, rocked it back and forth, tried shaking the shifter etc etc, but nothing really worked. Gonna try this little switch right now!
Thank you so much omg today was the worst day and then the truck wouldn't go into gear i was crying stranded & i saw your video and fixed my truck praise god thanks man alot
Hey man you saved me! My 99 suburban has this issue. I'm positive you have to do the same thing I did to get it before it locked for good. But now that I know what it is I can get it out the way
Thank you it's embarrassing to get stuck in the parking lot and so aggravating. Thanks for video greatly appreciated. My hubby will also be grateful. Yay!
Hey boss man good morning just wanted to stop in and say thank you for the video my ex-wife got into a situation like that with her friend's truck and they couldn't figure out what the problem is good looking out God bless you thank you 🙏
AWESOME!! THANKS this is my same issue rt now..All of a sudden it wouldn't shift out of park..Annoyed!! I turned the key like you suggested, went rt into next gear(started vehicle in neutral) ...I will be replacing ASAP
I got a 98 GMC Sierra four-wheel drive extended cab 1500 in this video was very helpful thank you because I just started having this problem today and I'm going to just take the stupid thing off because I had an old K5 Blazer back in the day and it did not have a safety any of the old squarebodys I was ever in my dad had a 78 actually two different 78i 1-ton long bed and a K-5 and I also had an 83 Suburban none of anyway my point is is none of the square bodies had a safety feature all you had to do was turn the key and you can pull it out of work you didn't have to have your foot on the brake my 77 OVGuide was the same way and my dad had a 79 Z28 and 74 Z28 and they were like that too anyway so I'm just going to disconnect the thing and do it like old school
My buddy had that same problem on his obs. He pulled on the shifter so hard he broke it off of the steering column had to replace the whole steering column
This was extremely helpful! Ive been dealing with this for awhile now and could only shift if my brake pedal was pressed in a weird way. On a side note if im able to grab my steering wheel and shake it and move it around what would be the fix for that?
I have worked for UPS and the mechanic replaced the brake light switch all the time in the GM package cars. And that was like at least one a week 😬🙄. It was the same problem lol the Ford’s never had this problem. Way to go GM!!!
Chevys have a lot of problems people talk crap about ford but it seems like Chevy is the junk one I used to like them till I started learning about fords oh and Toyota is good too I got a tacoma them things are really reliable
Do you have any advice why the gear shift lever on my chevy Silverado won't move/shift and change gears after replacing the full linkage cable? Before I replaced the linkage cable everything worked fine. Thanks.
You had me laughing bro! I literally do the same thing with my sierra dropping my kid off at school, just rockin it and trying to get it into park! Embarrassing lol part number? Thanks for the vid
I replaced this part, but it wasn't the issue. My mechanic told me to check my brake lights, and they weren't working. He told me it needed a brake light switch. (GM D891A for me). Got it installed a few minutes ago, and it shifts just fine and I now have brake lights. I haven't taken it on the road as of yet, but my cruise control went out at about the same time, and I'm hoping that works now too.
Buddy I have a 2007 classic body style Duramax and I have air but no balls chiller!!! Man I got robbed!! Mine won’t go into park!! I’ve been trying to figure out if I have a stretched cable or if I might have the same issue that you are having??? I am jealous now and I’m definitely going to have to get a ball chiller now!!! Lol!!
Funny story. Mines gone in my obs. And I didnt know it. And my daughter pulled it into reverse and backed it into a ditch. Took me forever to figure out how she did that.
Got a problem that sounds very much like yours my truck is a Chevy Colorado and it's stuck in park so glad it got stuck at home showed no sign of anything till I parked it then this stuck in park trying to research the problem and sounds like there are a few causes it's a bit of a pain to run em on down and it will all start with a cable from the tranny on up at this point don't recon I know what's up yet but I sure do appreciate you talking the time to show what you whent throught now what year is your truck mayi ask thank you for sharing
I just removed mine ( 2001 2500 HD ) throwed it in the trash and did not put another in . No problem after 6 months and going good . Watch those kids though !
Make sure that that whole part that he got off of Amazon didn’t get just displaced from where it’s supposed to be snapped in before you order a part off of Amazon; it might be a matter of just gorilla glue in the thing back in place where it goes in a couple of zip ties and you’re good for the rest of life for that vehicle. Without ordering Chinese shit.
I’ve got the same problem, but my brake pedal is not hard when I press it. I have to keep pumping it until it gets hard or I have to shut it off pump it when it gets really hard then turn the key on then I have to pump the brakes could be that my master cylinder is bad.
Mine does the same after some drifting/ doing Donuts on gravel. But its making bad noises too... But only sometimes. Any tips? Converter? If it drives, it drives and shifts fine
i am a little confused by this video.i had the same problem on my 99 but when i purchased a new solenoid i realized that it defaults to unlocked when not energized. so if its locking its working. the brake light swith is what turns off the power to unlock it. and the brake light switch wears out and wont travel far enought to disconnect power. in short if you disconnect battery and can shift out of park the solenoid is fine but the brake light switch is faulty.
PLEASE HELP! Truck won’t shift out of park unless I force it, in which I can get it into reverse and no further. I’ve already disconnected that unit and it still is stuck!
I have a similar issue, hard as hell to shift, occasionally it'll pop and wont shift into drive sometimes unless I go all the way down to second gear and start rolling before I toss it back up into drive, then everything is kosher. Gonna be troubleshooting tomorrow until I figure it out or get so stoned I cant see anymore.
@@Craigc4x4 my issue ended up being related to the anti theft so i had to switch out my ignition, i broke my shift handle off the column trying to get it past reverse so i said fuck it and sent it getting a new ignition cylinder. But yes, definitely get so stoned you see jesus
I have the same issue I replaced the shift mechanism and that didn’t fix ao now i will get this part and replace it also replaceing the neutral safety switch
I did that on a cat eye and ripped it down now I can’t get it to go past n into drive to drive my truck hopefully this video helps do that and idk what else maybe shift cable stretched from ripping the damn thing
@@j-boy9256 if you can find it I would really appreciate it my truck is stuck in park right now and I need to be at work Monday. I've went through this whole video and he doesn't say the name of the park
Dude, your video just saved my ass from embarrassment in a Costco parking lot! Kudos!
Thanks for the video. That is exactly what’s going on with my truck. Much appreciated.
Man I’ve got a 91 z71 I put my heart and soul and throw money at to no end. I’ll never part with it. I appreciate you and your truck. Stick it out till yours is yours. Every last piece and no other is that one
Just had this happen to me in negative 25 degrees temperatures on ChristmasEve. Thank you for putting this video on. You really saved me.
You're a life saver!! Wasn't sure if this was the problem or not but that disconnecting tip proved it was and now I can at least drive to go pick up the part! Thanks a bunch!!
I have a 2001 Chevrolet Silverado and I back in the my driveway and I backed up a little bit to far and I went to put it in drive and it wouldn't go down in drive and want go in park but I can crank it up in nugle and It want down in drive?
Thank you, thank you, thank you!! I’ve nearly ripped my shifter off in full fury because of this little crapper! I did exactly the same as you, rocked it back and forth, tried shaking the shifter etc etc, but nothing really worked.
Gonna try this little switch right now!
Thank you so much omg today was the worst day and then the truck wouldn't go into gear i was crying stranded & i saw your video and fixed my truck praise god thanks man alot
Hey man you saved me! My 99 suburban has this issue. I'm positive you have to do the same thing I did to get it before it locked for good. But now that I know what it is I can get it out the way
I snapped my whole shifter off today before seeing this video😂fml I was stuck in the parking lot and got it in drive but broke it in to drive
Not all hero’s wear capes! The looks I got shaking my truck.
Thanks for the great video. My work van is doing this. What a pain in the ars.
In all my years of owning, driving, working on, old dilapidated Chevy trucks I'm shocked this hasn't happened to me yet.
I just had this happen today luckily it happened in the driveway
@@user-yc2lv2zi5bI was also lucky when it happened to mine while it was at a shop
Thank you it's embarrassing to get stuck in the parking lot and so aggravating. Thanks for video greatly appreciated. My hubby will also be grateful. Yay!
I never even knew that this was a problem that existed on gmt400s. Interesting!
4l60e
Thanks, bud that's the wire I was looking to cut! Works like a 1968 Ford now.
Bring back the balls cooler !!! Geese these Trucks now and days don’t have them
How much for earl bro wit the reps??
Thank you!
I am having the same issue with my 2005 GMC Canyon. Now I know how to fix it.
Thank you so much so helpful, I'm going to pull it off myself tonight!
Hey boss man good morning just wanted to stop in and say thank you for the video my ex-wife got into a situation like that with her friend's truck and they couldn't figure out what the problem is good looking out God bless you thank you 🙏
Thanks been fighting with this for a while. Rock for weeks
AWESOME!! THANKS this is my same issue rt now..All of a sudden it wouldn't shift out of park..Annoyed!! I turned the key like you suggested, went rt into next gear(started vehicle in neutral) ...I will be replacing ASAP
I got a 98 GMC Sierra four-wheel drive extended cab 1500 in this video was very helpful thank you because I just started having this problem today and I'm going to just take the stupid thing off because I had an old K5 Blazer back in the day and it did not have a safety any of the old squarebodys I was ever in my dad had a 78 actually two different 78i 1-ton long bed and a K-5 and I also had an 83 Suburban none of anyway my point is is none of the square bodies had a safety feature all you had to do was turn the key and you can pull it out of work you didn't have to have your foot on the brake my 77 OVGuide was the same way and my dad had a 79 Z28 and 74 Z28 and they were like that too anyway so I'm just going to disconnect the thing and do it like old school
Thank you. This solved the problem. Works great now
My buddy had that same problem on his obs. He pulled on the shifter so hard he broke it off of the steering column had to replace the whole steering column
Lol Happens to me all the time 😂 obs problems
Lmaooo bro I just had bought that husky tool box recently and I seen it in the vid, clean vid!
This was extremely helpful! Ive been dealing with this for awhile now and could only shift if my brake pedal was pressed in a weird way. On a side note if im able to grab my steering wheel and shake it and move it around what would be the fix for that?
I have worked for UPS and the mechanic replaced the brake light switch all the time in the GM package cars. And that was like at least one a week 😬🙄. It was the same problem lol the Ford’s never had this problem. Way to go GM!!!
Chevys have a lot of problems people talk crap about ford but it seems like Chevy is the junk one I used to like them till I started learning about fords oh and Toyota is good too I got a tacoma them things are really reliable
Just had this issue today. Hopefully your video help me
Thank you. My 08 is starting to do this
Link to the part? What is it called? Break light switch?
These obs trucks are gorgeous trucks
I replaced mine and it works better but still gets stuck every once in a while. It’s in correctly without a doubt. 🤷🏻♂️ 1995 OBS C1500
Do you have any advice why the gear shift lever on my chevy Silverado won't move/shift and change gears after replacing the full linkage cable? Before I replaced the linkage cable everything worked fine. Thanks.
You had me laughing bro! I literally do the same thing with my sierra dropping my kid off at school, just rockin it and trying to get it into park! Embarrassing lol part number?
Thanks for the vid
Thanks great video I'm on the parking lot doing the same thing
What part did you replace?
Parking / shifter switch I believe
What is the part called?
I replaced this part, but it wasn't the issue. My mechanic told me to check my brake lights, and they weren't working. He told me it needed a brake light switch. (GM D891A for me). Got it installed a few minutes ago, and it shifts just fine and I now have brake lights. I haven't taken it on the road as of yet, but my cruise control went out at about the same time, and I'm hoping that works now too.
yo how did that go cause that's exactly mine also. crusie control out the shift issues and a reader said it's a brake sensor
@@justinburris7429 The brake light switch fixed it all. Brake lights, cruise control and stuck in park issue. About $25.00 on Amazon.
Buddy I have a 2007 classic body style Duramax and I have air but no balls chiller!!! Man I got robbed!! Mine won’t go into park!! I’ve been trying to figure out if I have a stretched cable or if I might have the same issue that you are having??? I am jealous now and I’m definitely going to have to get a ball chiller now!!! Lol!!
Star light headliner would be dope aswell 👌
Found mine just popped off at the forward portion.
Popped it back on and now it works fine.
You are 23 miles from 222,222. Get a pic of that!
Good video, what is the name of the part..?
Funny story. Mines gone in my obs. And I didnt know it. And my daughter pulled it into reverse and backed it into a ditch. Took me forever to figure out how she did that.
What is the name or the part number? Please help
What us that part called I don't think you mentioned it in your video
Dorman shift lock solenoid
Is the part.
Never clicked so fast
Videos are always dope as these folks say
Fuck yes this saved me a transmission
Got a problem that sounds very much like yours my truck is a Chevy Colorado and it's stuck in park so glad it got stuck at home showed no sign of anything till I parked it then this stuck in park trying to research the problem and sounds like there are a few causes it's a bit of a pain to run em on down and it will all start with a cable from the tranny on up at this point don't recon I know what's up yet but I sure do appreciate you talking the time to show what you whent throught now what year is your truck mayi ask thank you for sharing
I just removed mine ( 2001 2500 HD ) throwed it in the trash and did not put another in . No problem after 6 months and going good . Watch those kids though !
Same problem with mine a while back. Brake light switch
old school vehicles did not have the brake safety feature....so us old guys are used to not having to deal with this
That little button is for a aftermarket security system
I have the button what does it do
Happened to me to had to press the break twice fast to get it to into drive then got a cel found that part on my 96 and now it’s smooth
What's the name of the part
Make sure that that whole part that he got off of Amazon didn’t get just displaced from where it’s supposed to be snapped in before you order a part off of Amazon; it might be a matter of just gorilla glue in the thing back in place where it goes in a couple of zip ties and you’re good for the rest of life for that vehicle. Without ordering Chinese shit.
The dad shoes 👌
I've been dealing with this for a long time now. What is the part called?
I have this problem, replaced the part and it still doing the same thing, any idea what might be happening
Thank you!!!
Thank you brother!
I’ve got the same problem, but my brake pedal is not hard when I press it. I have to keep pumping it until it gets hard or I have to shut it off pump it when it gets really hard then turn the key on then I have to pump the brakes could be that my master cylinder is bad.
What is this part called?
Good stuff
Mine does the same after some drifting/ doing Donuts on gravel. But its making bad noises too... But only sometimes. Any tips? Converter? If it drives, it drives and shifts fine
It cost me 300$ and self labor now I don't have that problem anymore
Yeah I’ve just replaced the brake switch lol it’s super common
i am a little confused by this video.i had the same problem on my 99 but when i purchased a new solenoid i realized that it defaults to unlocked when not energized. so if its locking its working. the brake light swith is what turns off the power to unlock it. and the brake light switch wears out and wont travel far enought to disconnect power. in short if you disconnect battery and can shift out of park the solenoid is fine but the brake light switch is faulty.
THANKS !!!!
PLEASE HELP! Truck won’t shift out of park unless I force it, in which I can get it into reverse and no further. I’ve already disconnected that unit and it still is stuck!
I have a similar issue, hard as hell to shift, occasionally it'll pop and wont shift into drive sometimes unless I go all the way down to second gear and start rolling before I toss it back up into drive, then everything is kosher. Gonna be troubleshooting tomorrow until I figure it out or get so stoned I cant see anymore.
@@Craigc4x4 my issue ended up being related to the anti theft so i had to switch out my ignition, i broke my shift handle off the column trying to get it past reverse so i said fuck it and sent it getting a new ignition cylinder. But yes, definitely get so stoned you see jesus
what type of motor do you have in it and what type of exhaust do you have cause i cant get over how good it sounds
How did I get here so early lol
U should smoke the tail lights on earl
Thats a dope idea
I have the same issue I replaced the shift mechanism and that didn’t fix ao now i will get this part and replace it also replaceing the neutral safety switch
Replaced this actuator, didn't solve the problem. Brake lights worked, we replaced the brake light switch anyways and now it works.
Replaced my brake switch yesterday and now I've had this issue or did... kinda broke my shifter cable a second time this year 🤷♂️
Chevys man I tell you shoulda got a ford or Toyota
I noticed in a pinch I put on hazard light & was able to at least put in drive during the moment of the flash lighting .
I did that on a cat eye and ripped it down now I can’t get it to go past n into drive to drive my truck hopefully this video helps do that and idk what else maybe shift cable stretched from ripping the damn thing
Mine does the same thing but it's a 94 and doesn't have one of those you replaced...
What is the name of this part?
Did you find out the name of the part?
What is the name of that part?
It's called a shift interlock solenoid
I know that button is for the aftermarket security system but what does it do I can’t get mine to work
Thank you!
Which part was it called? You broke the connector lol
Got a link to the part ?
I've got 2004 colorado and my won't go into park i wondering if is the same thing.
Thats overdrive, the circle around the D means overdrive. Lol just sayin. Glad its fixed though
What’s the part called ?
Mine won't go into park, what do you think I should do?
Hey bro what is that part called
My is 1994 Ford ranger and on the street column
I’ve got a 95 Cheyenne with 250.000 miles with a 5 speed manual so I don’t have that issue
You got me out of the Aldi's parking lot thanks brother..... What exactly is the part description name so I can order one
You ever find out the part name??
@@skimakstheslumpgod3030 yeah it was $10 and took 3 minutes to put in. I've forgotten the name since then but I can find it if you need it.
@@j-boy9256 if you can find it I would really appreciate it my truck is stuck in park right now and I need to be at work Monday. I've went through this whole video and he doesn't say the name of the park
@@skimakstheslumpgod3030 $87 at AutoZone. Good luck bud.
What's the name of the part?!
I unlock the key and shift into neutral then start up from there. it was a hassle
What’s the. Some of the part?