Great news you can now preorder MonsterArts figures from kowkis and hiya toys figures, tip when you preorder anything using this link www.kowkistoy.com/?DIST=Rk5P make sure to always use my discount code Rubi-kowkis to get 6% off on everything you buy, it’s a way of helping me and me helping you in return thank you.
If it wasn't for Hiya toys, SHMA would have never figured out how to make the Godzilla neck joint look good. They would have stuck with the turtle neck foreskin looking joint for the next 10 years.
I’m assuming you’re talking about the individual segments that form around the neck area? There’s no evidence that points towards that direction, at that point it’s copying right from hiya. Monsterarts has more experience with articulation engineering, if you heard what I said about the info since Godzilla evolved they had to redesign everything from 0. I doubt they would’ve stuck with that turtleneck design, the neck design is very different also looking more thicker. When we review both we can see who actually made the better figure.
In their defense, it used resin that are less tolerant than abs or pvc. The latter being the material used in the production one. But not saying joints won't crack or easily popped off tho. We've seen it before, we might see it again. We'll see
Average Hiya Dickrider comment. TAS stated that the body was resin, so it can show a lot more detail in the prototypes. Don't act like Hiya doesn't do the same.
Its not hiya's sculpt, it is just that hiya was movie accurate but shma's pre evolved was the same as g19 which was inaccurate to give more articulation. But this figure proves that you can make a movie accurate figure and make it still more posible than hiya
There might be some confusion this isn’t a redesign from the promotional images, what they meant is this is a prototype sample. It’s the exact same figure Nothing has been updated.
You can‘t really have low expectations if you are getting this figure just because of how expensive it is. They should make this the best SHMA Godzilla figure to justify the price
There’s no denying those are expensive Figures right, unfortunately The Name & Figures Monsterarts comes with a lot quality control issues it’s like a mystery box, you may never know if you’re getting a good or bad figure. That’s why I tell people keep your expectations low, most of them keep them high thinking what they see here is what they’ll get, the final product turns out to be worse & they feel disappointed. I don’t support Monsterarts anymore years back now, if anything I might give this figure one last chance, I’m thinking of preordering it.
@@RubiGamingx yeah, I‘d be more fine with keeping my expectations low if Godzilla cost around 50-60 bucks like in 2019 but with the figure costing more than double the price I can‘t say that I‘ll just keep it low would I get it. I get what you are saying and SHMA should really watch it
I’ve explained this already multiple times, monster arts isn’t following accuracy within this line, they’re doing their own thing in terms of height and length. Yes Kong was taller in the movie while in figure form Kong isn’t.
I really hope they could also fix the same thing with shimo cause her body is a little to skinny and her tail needs to be smaller especially the paint job not just pure white the transparent crystals is what I love and to much articulation especially in the shoulders where those flaps are shown ;-;
I don’t think we’ll see much of a chance with the other figures, Shimo has been said to be on early concept or at least taking inspiration. If they do get any updates that would be surprising & good.
To quote mike from mike's monsters, with photography you could even use playmates figure and make it look like shma. Probably photography magic. The detail looks more popped thanks to shadows and stuff
That’s not new it’s the same Godzilla evolve they’ve always shown, they only decided to showcase the prototype to demonstrate articulation. Don’t consider this to be an upgrade.
Still needs to go through the mass production phase. I’ll never forgive Bandi for giving Minus one stupid smudgy angry bird eye brows and shitty eye/teeth paint. Body QC can also be questioned that’s more of a case by case basis.
That’s what happens when you have high expectations. I’ve told people time after their time, lowered your expectations to not be disappointed. Thankfully I canceled my pre-order for that figure I was not happy How it looked, on my instagram page I got so much hate with people saying I was wrong, that the final product would look amazing! Turns out I was right 🙂↔️
I don’t know from what I’ve heard. This is only an exclusive figure which means selected stores only have it. Kowkis has it and it has free shipping to the USA.
@@kneckno8356basically issa different material. If you ever handle a resin printed figure, you would know they are more brittle and less tolerant. Easily broke and really loose. The one that ppl will get will use a different material, abs and pvc, the standard for figures, which are more durable than resin
It does not look anywhere better than hiyas , just the head, body, claws, and dorsal plates is ok. The arms sculpt looks so weird. I *figure* that it’s gonna be like the mv g19 figure where the body, the dorsal plates, the spikes, everything is gonna be the same color and shade. It may be articulated but all the ball joints will fall off like every sh monster arts figure.
Just to clarify some confusion this isn’t an upgrade from the previous one, it’s the exact same figure with the exception this is a factory test showcase.
Ok officially IDC monsterarts has won me over I will be getting this I just got a job and I'm saving up for it so I can confirm that I will be picking this up🎉😊🎉
To me Godzilla has always been the best figure out of their line this year, it’s great to see them show a prototype sample. Hopefully you and others enjoy this figure when it’s released.
Delay Shimo and SK now Tamashii! U have shown here that u are taking criticism and improving on your Goji Evolved Figure but please for the love of god Redo SK and his awful faces and Shimo too.
Let me clear up some confusion, this isn’t a redesign figure from the previous promotional images, it’s the exact same figure. reason it looks different is because this is a prototype sample from the factory.
Great news you can now preorder MonsterArts figures from kowkis and hiya toys figures, tip when you preorder anything using this link www.kowkistoy.com/?DIST=Rk5P make sure to always use my discount code Rubi-kowkis to get 6% off on everything you buy, it’s a way of helping me and me helping you in return thank you.
has potential to be the greatest godzilla figure of all time
Edit: The shimo in that promo looks like the fan made version before new empire came out
All they need to do is give it an accurate paint job and keep it looking just like the new images
@@Dk_Spino3494and don’t make us selling our 2 kidneys
@@Louislemairiasoh boy do i have some news for you
@@LouislemairiasNah, they're probably gonna make us sell both of our kidneys,lungs,heart and brain.
@@RedSkull-hn2zi nah they will make us sell our parents
If it wasn't for Hiya toys, SHMA would have never figured out how to make the Godzilla neck joint look good. They would have stuck with the turtle neck foreskin looking joint for the next 10 years.
I’m assuming you’re talking about the individual segments that form around the neck area? There’s no evidence that points towards that direction, at that point it’s copying right from hiya.
Monsterarts has more experience with articulation engineering, if you heard what I said about the info since Godzilla evolved they had to redesign everything from 0. I doubt they would’ve stuck with that turtleneck design, the neck design is very different also looking more thicker.
When we review both we can see who actually made the better figure.
Aye ya'll heres a fun fact:
They had to superglue the whole fucking body, the legs also broke ofc.
And yes i am talking about the evolved godzilla.
In their defense, it used resin that are less tolerant than abs or pvc. The latter being the material used in the production one. But not saying joints won't crack or easily popped off tho. We've seen it before, we might see it again. We'll see
Yeah, It was kinda embarrassing
Average Hiya Dickrider comment.
TAS stated that the body was resin, so it can show a lot more detail in the prototypes. Don't act like Hiya doesn't do the same.
@@archerhayesstudioI'm not a hiya dickrider lmfao, +90% of hiyas figures are literally better than the whole shma line.
@@archerhayesstudioI don't know anything about hiya.
im so hyped
it is me or they are more close to hiya's sculpt now ?? because when i saw the post i though it was hiya account who posted it
Same
Its not hiya's sculpt, it is just that hiya was movie accurate but shma's pre evolved was the same as g19 which was inaccurate to give more articulation. But this figure proves that you can make a movie accurate figure and make it still more posible than hiya
There might be some confusion this isn’t a redesign from the promotional images, what they meant is this is a prototype sample. It’s the exact same figure Nothing has been updated.
Same
You can‘t really have low expectations if you are getting this figure just because of how expensive it is. They should make this the best SHMA Godzilla figure to justify the price
There’s no denying those are expensive
Figures right, unfortunately The Name & Figures Monsterarts comes with a lot quality control issues it’s like a mystery box, you may never know if you’re getting a good or bad figure. That’s why I tell people keep your expectations low, most of them keep them high thinking what they see here is what they’ll get, the final product turns out to be worse & they feel disappointed.
I don’t support Monsterarts anymore years back now, if anything I might give this figure one last chance, I’m thinking of preordering it.
@@RubiGamingx yeah, I‘d be more fine with keeping my expectations low if Godzilla cost around 50-60 bucks like in 2019 but with the figure costing more than double the price I can‘t say that I‘ll just keep it low would I get it. I get what you are saying and SHMA should really watch it
What song did you use when you showed the figure
I won’t lie I’m gatekeeping all of my personal songs.
This is the greatest. I preordered hiya toys Shimo.
I got a few on preorder, I might get this figure I’m thinking about it.
Okay.@@RubiGamingx
I can't lie is actually kind of good I might get it
Godzilla evolve has always looked excellent. It’s the exact same figure shown in the promotional images.
He’s beautiful
It’s the best figure out of this line.
I would agree. And I did pre order him so I am very excited to see him.
Why is scar king taller than Kong, he wasn’t in the move right?
the size was close
@@SilaSoralump but skar king was always smaller not taller I feel like that’s common knowledge
I’ve explained this already multiple times, monster arts isn’t following accuracy within this line, they’re doing their own thing in terms of height and length.
Yes Kong was taller in the movie while in figure form Kong isn’t.
i honestly like scar king being taller then kong since it makes him look like a big bad
That’s a good way of seeing things since I do remembered, before the movie came out everyone thought he was taller! By a lot.
I really hope they could also fix the same thing with shimo cause her body is a little to skinny and her tail needs to be smaller especially the paint job not just pure white the transparent crystals is what I love and to much articulation especially in the shoulders where those flaps are shown ;-;
I don’t think we’ll see much of a chance with the other figures, Shimo has been said to be on early concept or at least taking inspiration. If they do get any updates that would be surprising & good.
Why does that shimo look better then the release did they fix it?
To quote mike from mike's monsters, with photography you could even use playmates figure and make it look like shma. Probably photography magic. The detail looks more popped thanks to shadows and stuff
Nothing has been fixed, please keep in mind promotional images will always utilize effects.
I can't wait to sell my left arm to buy it!😊❤
Specially for Shimo coming in at $240 😬plus shipping
The new evolved Godzilla looks more and more like hyia toys Godzilla
That’s not new it’s the same Godzilla evolve they’ve always shown, they only decided to showcase the prototype to demonstrate articulation. Don’t consider this to be an upgrade.
Still needs to go through the mass production phase. I’ll never forgive Bandi for giving Minus one stupid smudgy angry bird eye brows and shitty eye/teeth paint. Body QC can also be questioned that’s more of a case by case basis.
That’s what happens when you have high expectations. I’ve told people time after their time, lowered your expectations to not be disappointed. Thankfully I canceled my pre-order for that figure I was not happy
How it looked, on my instagram page I got so much hate with people saying I was wrong, that the final product would look amazing! Turns out I was right 🙂↔️
I'm still getting the hiya instead because I'm broke
I hope that comes out on Amazon🎉
I don’t know from what I’ve heard. This is only an exclusive figure which means selected stores only have it.
Kowkis has it and it has free shipping to the USA.
I'm still praying that sh monsterarts godzilla evolved doesn't not have any issues
The prototype was said to have standing issues by people.
@@PowderFairyxon the sh monsterarts account they said that will not be on the mass production because that was a resin sample
Lmao wym?
His whole body broke and they had to superglue it
@@kneckno8356 just check the comments in shma community post
@@kneckno8356basically issa different material. If you ever handle a resin printed figure, you would know they are more brittle and less tolerant. Easily broke and really loose. The one that ppl will get will use a different material, abs and pvc, the standard for figures, which are more durable than resin
SHMA GxK Figures: The new Malnourished
Godzilla is very fit tho compared to the rest.
Looks alot better than the previous shm evolved that they showcased so far
Also looks alot better than hiya's
It does not look anywhere better than hiyas , just the head, body, claws, and dorsal plates is ok. The arms sculpt looks so weird. I *figure* that it’s gonna be like the mv g19 figure where the body, the dorsal plates, the spikes, everything is gonna be the same color and shade. It may be articulated but all the ball joints will fall off like every sh monster arts figure.
Also the dorsal plates are much shorter than it was in the movie
(In my opinion)
Just to clarify some confusion this isn’t an upgrade from the previous one, it’s the exact same figure with the exception this is a factory test showcase.
@@GhidorahFan64literally no one agrees wit you lol
Who's Shimu?
Ok officially IDC monsterarts has won me over I will be getting this I just got a job and I'm saving up for it so I can confirm that I will be picking this up🎉😊🎉
To me Godzilla has always been the best figure out of their line this year, it’s great to see them show a prototype sample.
Hopefully you and others enjoy this figure when it’s released.
The head sculpt looks kinda bad imo compared to hiya
Just let us enjoy shma figures in peace. But I respect your opinion
Nah it looks great
i think hiya looks really bad i mean i can sculpt a better costom head than the hiya ngl
@@SilaSoralump No.Hiya looks great.
@@SilaSoralump And so does sh.
Is it just me or does it not look as skinny as in the promo images?
Not just you
Certain angles always do the magic trick, until we see more images we’ll have a better understanding.
Delay Shimo and SK now Tamashii! U have shown here that u are taking criticism and improving on your Goji Evolved Figure but please for the love of god Redo SK and his awful faces and Shimo too.
Let me clear up some confusion, this isn’t a redesign figure from the previous promotional images, it’s the exact same figure. reason it looks different is because this is a prototype sample from the factory.
Why the shimo look better than the poster
Shimu looks terrible