Very impressive to say the least. You have a lot to work with and a lot to do. My hat off to your wife. She must be one heck of a great person and spouse. There are a lot more expensive hobbies than this that you could be doing. So in a way. She is lucky you are not into Nitrous Harley Racing for real. Love the content and explanations. Also subbing to see how the build comes along. Really hoping you show a lot of content on your journey to full truck setup. You must have some mad electric skills also. Great job my man. Love that you got your Father into this hobby also. Good for you.
u should put two curtains behind the seat that you open to go in so when your in the seat it feels like theres nothing behind you instead of a whole room. just somemthing personal id do if i had that setup which is dope btw. not enough viewers for this type of setup
Tnx, its been slow atm, got a kid a few months ago so have had no time for any projects but i hope to get started really soon, got the racing rig car atleast sorted out. Its a old 1989 volvo 740 thats gonna be my racing rig :)
I drove semi's for 17 years and had to quit because of vertigo. The only thing I would have done different was mounted the wheel upside down. Would feel funny for me to drive it like a car. I am going to be building a semi pit myself actual size with four TV's. Overall though a great setup.
Thats suck that you had to stop trucking, y feel the same i drive trucks irl and i dont like the car seat position and wheel, but it works, driving cars in truck position would be awful, thats why i need to get the truck cab going asap. Gonna go four 43" tvs for the truckcab rig. Thanks man
@@IamAW If you mount your wheel upside down with the wheel coming up at a 45 degree angle, that is more like a semi wheel. It would tilt toward the dash at 75 degrees and could tilt down to 45 degrees. I use to tilt mine up and I had a steering wheel desk that had hooks on the top of it. I could then do my logbook or even eat a meal on it. Go to google and look up Big Rig Truck Steering Wheel Desk.
They are not the same panels, the middle OLED is a new 2022 CS OLED and the 2 side OLEDs are older 2019 C9 OLEDS so i got some difference there you cant get them to match cause of they dont use the same panel, if i remember right the c7 c8 c9 cx use the same panels, and the oleds have pixel shifting enabled so they are constantly moving the picture so you cant get them to perfect line each other.
Tnx man, just google philips hue lights www.ebay.com/p/20059692070?iid=185943568548&rt=nc They run with there own software "philips hue" or you can use simhub and i recommend running them with simhub there software is 100 times better, it scans the screen and copy the colors on your screen, or you can pick a specific place on your screen you want it to copy, thats what im doing, telling the software to copy the dashboard. There are cheaper DIY ways but i have not tryed them so dont know how they work.
Very nice rig, my friend. I currently am setting up my own sim rig as well. This will be my first full sim build and it is fun so far. That real life rig your doing though is on a whole different level, that's crazy!! I love to see the passion you have for it though. If I owned my own house that's the kind of setup I would be building. That's sick brother!! Love your setup. I just came across your channel and I'm def subscribed now for sure. What timing to catch it with today's vid's... lol - Any way, Happy New Year to You.
Happy New Year man, sweet man, first real rig is the best man, my first real rig was a fanatec setup csw2.5 v3 pedals and shifter, triple 32" monitors, hope your journey will be amazing man, simracing is my lifes passion
Tnx man, i run the Car stereo connected to a 12v battery, and to connect it to your pc, you run a aux cable from the back of the stereos sub/rear connector to your pcs mic input, and you download Voicemeter Banana and set it up to play the audio from your audio jack in to your headphones, connect your phone with bluetooth to the stereo for the music and your good to go
I have got this issue on some truck now with the new 1.50 update so i cant help you :/, have not played 1.50 to much cause of irl stuff, so have not found the issue yet
Im useing a gigabyte auros master that has 3 hdmi ports and on the forth tv i use a swedish branded converter thats like 60 dollars each, they work quiet good, was having issues with cheap once before so just bought expensive once, they are 8k 60 fps kables.
The dashboard, is really easy, i could make a video how to do the radio and stuff to work on your pc, its really simple. Gaugde is a bit more work, you need arduinos and code with the free software simhub, its not to hard just need some guides :)
i have tryed had a lot of pedals, not to many expensive once, but the last pair i had was fanatec v3, and the simjack pedals are cheap but they feel amazing, but in the truck rig im using the trucks own pedals and in the racing rig im gonna use the cars pedals.
@piggehdeluxe that's awesome. Very humbled beginnings for sure. My goal is by the end of this year I'm hoping to have atleast half as much of a setup as you do
Im running a aorus master extreme rtx 3080 and it has 3 HDMI ports so they are running straight HDMI cables, before i was running expensive active displayport to hdmi converters on my old gpu
Ive given up on trying to get ETS2 to run on more than 3 screens as the interface I feel like I need a degree in programming and dont have the time to sit and learn. So ets or ats is just out of the picture as I would love to come home from work and sit in a nice 4 - 6 screen setup without having to spend months configuring it.
Heres the wheel www.ebay.com/itm/125835431491 i mean you could but its really heavy, you will probebly not have any FFB cause of the wheight of the wheel, the shifters i ran a water pipe from the local store.
i have bought all the things i need, another DD wheelbase "moza r12", Quad Oled Tvs, Pedals, twin Shifters and other electronics, have been messing with Motion aswell. Got a new born this summer so have not had much time to start building yet, hope that i can get started soon here in the comming weeks :)
I run asus bezzle delete kits, they do a great jobb och making the screens seamless, but they are really picky on angle, and my tvs are on a bit to high of a angle for them but it works, haha man that would be awesome, sadly i dont have time for that :)
Классная идея с кабиной от Скании! Очень интересно, как это будет выглядеть с 4 мониторами. Надеюсь, ты будешь делиться техническими деталями. Подпишусь и буду следить :) Удачи в постройке!
hi, very good video and rig. i have a question, is this seat motor loud at night . why am i ask . because i want to buy 2 dof or 3 dof seat. but my game room up stairs and my wife sleep down stair. when motor too loud . i dont buy it. i cant speak and write good i am sorry
Hi man diy motion is gonna be quiet loud, but i think the Next Level Racing V3 seat mover is abit quiet, maybe if you run it at a low setting and having your rig on rubber/soft styrofoam it might work
In terms of a different trucking-esque shifter, have you looked at the SHH Newt? It can also come with 8 gears like the TH8A but should be more "mechanical" than just clicky like the Moza one P.S. The trucking rig will actually be insane if you do manage to complete all what you said you want to do
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Im subscribing because I want to see you complete that Scania project
Bro, at this point just buy a truck 😂😂😂
I drive trucks at work :) ,Volvo FM 410 Crane truck, Scania R500
My sim inspired me to get my CDL and work toward getting a RNG lowboy and truck. I love trucks, idk something about them….
can’t wait to see if u pull this off. Good luck it would be epic
Very impressive to say the least. You have a lot to work with and a lot to do. My hat off to your wife. She must be one heck of a great person and spouse. There are a lot more expensive hobbies than this that you could be doing. So in a way. She is lucky you are not into Nitrous Harley Racing for real. Love the content and explanations. Also subbing to see how the build comes along. Really hoping you show a lot of content on your journey to full truck setup. You must have some mad electric skills also. Great job my man. Love that you got your Father into this hobby also. Good for you.
u should put two curtains behind the seat that you open to go in so when your in the seat it feels like theres nothing behind you instead of a whole room. just somemthing personal id do if i had that setup which is dope btw. not enough viewers for this type of setup
yes that makes a huge difference
I'm glad I found you. That cab sim setup will be awesome!
I didnt think having that much passion was even possible lmao.Going to look beautifull!
thanks :)
now im even more invested when i saw the scania project. lets go.
What a freaking project
Tnx, its been slow atm, got a kid a few months ago so have had no time for any projects but i hope to get started really soon, got the racing rig car atleast sorted out. Its a old 1989 volvo 740 thats gonna be my racing rig :)
How much 🤔 it's cost bro wow it great can be your friend right now
the rig is about 6-7k in its form atm if you buy it all new, but you can save alot on screens and wheel.
i love that truck cab thats going to be super nice
DO A VIDEO ON HOW YOU GOT OR MADE YOUR SHIFTER EXTENDER!!!
ill make some videos when i got time for it :)
love your set up,id love a triple screen rig,one day soon hopefully.
Thanks
WOW, this is AWESOME man!
I drove semi's for 17 years and had to quit because of vertigo. The only thing I would have done different was mounted the wheel upside down. Would feel funny for me to drive it like a car. I am going to be building a semi pit myself actual size with four TV's. Overall though a great setup.
Thats suck that you had to stop trucking, y feel the same i drive trucks irl and i dont like the car seat position and wheel, but it works, driving cars in truck position would be awful, thats why i need to get the truck cab going asap.
Gonna go four 43" tvs for the truckcab rig.
Thanks man
That's dope man!! I never thought of that, gonna try it out when I get home. Have a g29
Hold up, what do you mean the wheel upside down? This is not how they are in trucks?
@@IamAW If you mount your wheel upside down with the wheel coming up at a 45 degree angle, that is more like a semi wheel. It would tilt toward the dash at 75 degrees and could tilt down to 45 degrees. I use to tilt mine up and I had a steering wheel desk that had hooks on the top of it. I could then do my logbook or even eat a meal on it. Go to google and look up Big Rig Truck Steering Wheel Desk.
it'd be like you had the steering wheel adjusted all the way down. You know how we slam the seat all the way down in real semis.
either viewing angle or most likely the panels need to be calibrated
They are not the same panels, the middle OLED is a new 2022 CS OLED and the 2 side OLEDs are older 2019 C9 OLEDS so i got some difference there you cant get them to match cause of they dont use the same panel, if i remember right the c7 c8 c9 cx use the same panels, and the oleds have pixel shifting enabled so they are constantly moving the picture so you cant get them to perfect line each other.
Nice rig. Can you give me a link or a name for the lights? Do they sync the color with a camera?
Tnx man, just google philips hue lights
www.ebay.com/p/20059692070?iid=185943568548&rt=nc
They run with there own software "philips hue" or you can use simhub and i recommend running them with simhub there software is 100 times better, it scans the screen and copy the colors on your screen, or you can pick a specific place on your screen you want it to copy, thats what im doing, telling the software to copy the dashboard.
There are cheaper DIY ways but i have not tryed them so dont know how they work.
Awesome setup man !!! Big up !!!! One day I'll run a triple it's so nice
Thanks man, you gonna love it man, soo much more fun to drive when it feels "real"
Very nice rig, my friend. I currently am setting up my own sim rig as well. This will be my first full sim build and it is fun so far. That real life rig your doing though is on a whole different level, that's crazy!! I love to see the passion you have for it though. If I owned my own house that's the kind of setup I would be building. That's sick brother!! Love your setup. I just came across your channel and I'm def subscribed now for sure. What timing to catch it with today's vid's... lol - Any way, Happy New Year to You.
Happy New Year man, sweet man, first real rig is the best man, my first real rig was a fanatec setup csw2.5 v3 pedals and shifter, triple 32" monitors, hope your journey will be amazing man, simracing is my lifes passion
Your cockpit is amazing dude, can you explain how you setup that car stereo to work with the PC? I've never thought of that before and am interested!
Tnx man, i run the Car stereo connected to a 12v battery, and to connect it to your pc, you run a aux cable from the back of the stereos sub/rear connector to your pcs mic input, and you download Voicemeter Banana and set it up to play the audio from your audio jack in to your headphones, connect your phone with bluetooth to the stereo for the music and your good to go
I love it bro 🔥🎬💛
nice setup! how you mount volvo seat to your rig??
Home made alu brackets :)
I always have a good laugh when someone says "i bought it cheap, two hundreds or so...". It's funny how "cheap" is defined based on where one lives.
yes and in what area were talking about it, in simracing everything is expensive sadly, diy is the only way to go.
How do you get the dashboard so bright? When I'm playing the cab is so dark I can hardly see any detail.
I have got this issue on some truck now with the new 1.50 update so i cant help you :/, have not played 1.50 to much cause of irl stuff, so have not found the issue yet
wtf damn
What HDMI convertor cables did you use?
Im useing a gigabyte auros master that has 3 hdmi ports and on the forth tv i use a swedish branded converter thats like 60 dollars each, they work quiet good, was having issues with cheap once before so just bought expensive once, they are 8k 60 fps kables.
Awesome rig bro it's really nice 🚛
Can you show us how to set up the graphics like yours I’m having issues with zooming out in the cabin with my 3 65” 4k monitor.
Do you have nvidia surround on and running the game in triple rendering mode ?
How do you setup the Dashboard. i will like to build one like yours
Would you be willing to share the .. How to and parts
The dashboard, is really easy, i could make a video how to do the radio and stuff to work on your pc, its really simple.
Gaugde is a bit more work, you need arduinos and code with the free software simhub, its not to hard just need some guides :)
Great video my brother!!
Tnx
can I get that old stuff that pedals and steering wheel? hehe
sorry, saving it for future diy projects :D
@@piggehdeluxe okay sir! goodluck to your future project! hehe
it even squeaks my gosh this is beautiful
Spent all this cash and using cheap ass pedals 😂😂😂
i have tryed had a lot of pedals, not to many expensive once, but the last pair i had was fanatec v3, and the simjack pedals are cheap but they feel amazing, but in the truck rig im using the trucks own pedals and in the racing rig im gonna use the cars pedals.
Absolutely amazing my friend
This is freaking awesome. Can u make a video on the bass shaker setup with sim hub u mentioned
Yes i will make a video about it later :)
yes same please make that
@@piggehdeluxe thnk u
Looks like a fun project!
Epic man! One question, how its made the wood-like dashboard? It's on screen or a real thing?
The dashboard is ingame, and the mid console is home made :)
Cool setup dude. What gear lever extension are you using? Thanks
Thanks, I use a home made copper pipe that fits perfect on the shaft
I absolutely love this setup, definitely a DREAM setup of mine to get thos year
Dreams can come true :) took me 5 years to get to this point in simracing, i started with a g27 and a 24" monitor
@piggehdeluxe that's awesome. Very humbled beginnings for sure. My goal is by the end of this year I'm hoping to have atleast half as much of a setup as you do
yo digo.. porque si les gusta tanto esto.. porque no se sacan la libreta de camiones y salen a manejar en fed ex o dhl etc... ?
i already have a truck license and drive a 2018 volvo fm 410 flatbed with a crane on it at work :)
That’s EPIC. What cables you running from your Graphics Card to those 3 55” TV’s?
Im running a aorus master extreme rtx 3080 and it has 3 HDMI ports so they are running straight HDMI cables, before i was running expensive active displayport to hdmi converters on my old gpu
he said it in the video lol
Ive given up on trying to get ETS2 to run on more than 3 screens as the interface I feel like I need a degree in programming and dont have the time to sit and learn. So ets or ats is just out of the picture as I would love to come home from work and sit in a nice 4 - 6 screen setup without having to spend months configuring it.
when i win the lottery ill not tell anyone, but there will be signs
Awesome setup cheers
Can I use that wheel on logetich g29 with right adapter and what website and shifter u used a pipe from store ?
Heres the wheel www.ebay.com/itm/125835431491
i mean you could but its really heavy, you will probebly not have any FFB cause of the wheight of the wheel, the shifters i ran a water pipe from the local store.
@piggehdeluxe ok thank you i ordering a custom wheel already for my Logitech is blue racing wheel but I get that one for next time thank for info
You must be single unless you have the best wife or gf. Lol
Im happy married to the worlds best woman that only wants to see me happy
that room looks like devil
Awesome ,my dream setup , Happy New Year 🎉
Tnx, Happy New Year
Are you a truck driver in real life too ??
If no, why dont you become one?
@@serebbi yes i drive in real life, i drive a 2022 volvo fm500 flatbed crane truck :)
@@piggehdeluxe Ok then, then thats cool!
How far r u now
i have bought all the things i need, another DD wheelbase "moza r12", Quad Oled Tvs, Pedals, twin Shifters and other electronics, have been messing with Motion aswell.
Got a new born this summer so have not had much time to start building yet, hope that i can get started soon here in the comming weeks :)
@@piggehdeluxe newborns really fuck your life for a bit 😂 can't wait to see an update eventually.
What a set up!
do you use mods in ats or just run vanilla ?
i Running JBX 2.0 Graphics mod and truck mods, sound mods.
Did you do you t.v.s u shaped? Looks seamless. Be awesome if you could minimize it all and sell some premade cabs man, youd make some cash!!!
I run asus bezzle delete kits, they do a great jobb och making the screens seamless, but they are really picky on angle, and my tvs are on a bit to high of a angle for them but it works, haha man that would be awesome, sadly i dont have time for that :)
what is games?
i dont know, it all looks real to me :D
Классная идея с кабиной от Скании! Очень интересно, как это будет выглядеть с 4 мониторами. Надеюсь, ты будешь делиться техническими деталями. Подпишусь и буду следить :) Удачи в постройке!
Thanks man i will show off every step of the truck cab build :)
Absolutely beautiful
thanks
you are from Sweden? sounds like that.
Yes sir
@@piggehdeluxe Görgött. Gillar din setup. Den är cool.
what shifter is that?
The Truck shift nob is a aliexpress and the shifter is a Thrustmaster TH8A for trucking and i use a moza shifter for other racing stuff
Amazing
Nice sim rig
thanks
hi,
very good video and rig. i have a question, is this seat motor loud at night . why am i ask . because i want to buy 2 dof or 3 dof seat. but my game room up stairs and my wife sleep down stair. when motor too loud . i dont buy it. i cant speak and write good i am sorry
Hi man diy motion is gonna be quiet loud, but i think the Next Level Racing V3 seat mover is abit quiet, maybe if you run it at a low setting and having your rig on rubber/soft styrofoam it might work
I'm from Jamaica can I get one of the Logitech wheel to set up my American Sim please
Sry man all of them are going to get used, modded or parts
In terms of a different trucking-esque shifter, have you looked at the SHH Newt? It can also come with 8 gears like the TH8A but should be more "mechanical" than just clicky like the Moza one
P.S. The trucking rig will actually be insane if you do manage to complete all what you said you want to do
Im gonna buy that shh ahifter and try it :) tnx
@@piggehdeluxe Just know the delivery takes about a month, they have many orders so they're currently bit behind
🫵🫵🫡🫡🫡🫡🫡🇺🇸🇺🇸🇺🇸nice
do you sell any unwanted stuff?
Sry i dont sell stuff i only buy xd
Nice
Unwatchable, can't understand what you are saying.
Love that you liked it