Part 2: Reducing The Speed of An Industrial Sewing Machine for Leatherwork.
Вставка
- Опубліковано 5 вер 2024
- In this second part of the Industrial Sewing Machine mini course, I show you how to reduce the speed of the sewing machine to make it more controllable for stitching leather. I show two options to do it. I show you how to make your own simple pulley system to change the speed ratio of the machine and slow it down to about one stitch per second. I also show you how to use a ready-made speed reducer kit.
🌏 𝐃𝐢𝐫𝐞𝐜𝐭 𝐋𝐢𝐧𝐤 𝐭𝐨 𝐔𝐊 𝐒𝐮𝐩𝐩𝐥𝐢𝐞𝐫:
𝐓𝐲𝐬𝐞𝐰 𝐓𝐘-3600𝐂 -1 Cylinder Arm Walking Foot Needle Feed Sewing Machine, available here:
glvideo.net/tye1
🌏 𝐃𝐢𝐫𝐞𝐜𝐭 𝐋𝐢𝐧𝐤 𝐭𝐨 𝐔𝐒𝐀 𝐒𝐮𝐩𝐩𝐥𝐢𝐞𝐫:
(The same machine but with a different label.)
𝐓𝐞𝐜𝐡𝐬𝐞𝐰 2600 Cylinder Arm Walking Foot Needle Feed Sewing Machine, available here:
glvideo.net/sha1
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
If you'd like to check out our website, where you’ll find loads more content, head over to:
🌏 geordiesworksh...
✅ 𝐋𝐈𝐍𝐊𝐒:
All of the tools and other materials used in this video are listed with links to where you can obtain them in your own country on the page devoted to this video, which you can see here:
🌏 geordiesworksh...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
❤️❤️❤️ 𝐏𝐋𝐄𝐀𝐒𝐄 𝐁𝐄𝐂𝐎𝐌𝐄 𝐀 𝐏𝐀𝐓𝗥𝐎𝐍 𝐀𝐍𝐃 𝐇𝐄𝐋𝐏 𝐒𝐔𝐏𝐏𝐎𝗥𝐓 𝐓𝐇𝐄 𝐂𝐇𝐀𝐍𝐍𝐄𝐋: ❤️❤️❤️
If you like my videos and you’d like to help support my channel, allowing me to continue to create regular content please consider becoming a Patron. For more information, please visit my brand new Patreon page:
/ geordiesworkshop
As a patron you get lots of extra benefits, including:
✅ You can watch Geordie's videos - Without those annoying Adverts!
✅ You get access to additional ‘Patron-Only’ videos.
✅ You get listed as a Patron in the end credits on every new video.
✅ You’ll be eligible for Give-a-ways of reviewed tools.
✅ You'll get early access to videos before they go on UA-cam.
✅ You'll get Free access to past and future plans, patterns etc.
✅ You can access Geordie's community and ask me questions.
✅ You'll qualify for 5% off all our 'Geordie Tools' brand of products.
✅ You'll get behind-the-scenes videos, blooper reels and extra footage.
✅ You'll get a chance to suggest ideas for videos.
A big 𝐓𝐇𝐀𝐍𝐊 𝐘𝐎𝐔! in advance.
Geordie.
*Benefits differ, depending on the pledge tier you select.
𝐎𝗥, if you would just like to buy me a coffee or make a one-off donation, please use the PayPal link below:
🌏 www.paypal.me/...
Thank you so much for this video - I have followed your instructions & installed the same set-up on the table for a 246 machine. It’s working well! Thank you again!
Glad it helped
Thanks Geordie just bought a used Jack want to modify it to slow it down just like you did appreciate your help
Thanks Geordie! Great tutorial and explanations! I just discovered the channel today,( I’m new to industrial sewing machines) but exactly what I was trying to figure out! Cheers mate!
Welcome aboard!
Thank you Geordie. Glad To learn from you.
I have watched about five of these speed reduction videos and this was the best of the lot..I did buy a 550W brushless servo for my singer 45K which did reduce the speed greatly from the 2800rpm clutch motor ,but it does not have enough torque to push through think leather.I am told the reduction pulley will fix that problem.. Thanks Gordie for sharing in clear detail how this is achieved.
You're very welcome. Happy stitching!
Thanks .Enjoy the series.
More to come!
Very good, love the temper in you voice.
I have found you because I decided after years of sewing on my Brothers WF, I needed it to be slower.
I am going to first reduce the pulley size on the motor from 2.75 in to 1.75 in. This will be 75% of the original.
I don't think that will be enough. If not, your set up will give a better result.
I saw another similar to yours that was mounted on the table leg with both pulleys on the end of the shaft, easer to remove belt.(although don't think removing the belt would be a concern.
Many thanks. Good luck with your modifications.
Fantastic, thank you. Very helpful. Looking forward to the next one.
Glad it was helpful!
Thank you for showing me how to get control of the speed of my Singer 111, Mac
This is an excellent video! I’m only sorry it took me so long to view it! Keep up the the good work!
Thanks, will do!
Exactly what I needed. Thank you very much.
Hello Kathy. Thanks. I'm pleased you found it useful.
this is an awesome video, all your stuff is brilliantly done, and very well narrated
This is brilliant - very clear, detailed explanation. Thank you!
Glad it was helpful!
Just purchased a servo motor from Amazon, they also sell a 45 mm pully that you can put on the servo motor for $8.99 US. That might get you where you need to be.
Thanks for the info.
No, it's not the same. Trust me, I tried both things. And a speed reducer is much better ans slower than only a 45mm pulley on the motor.
I subscribed
What I did was put a wood block under the pedal I have a juki 5550 and it goes so fast. So when I step on it it only goes so far . Don't no if that will hurt the motor in the long run . I will gear it down if you think the would be better
Amazing video thank you
Thank you.
I recently bought a pfaff
A good choice.
These videos are so useful. Unfortunately the machine I purchased from the UK came with a 12mm shaft on the motor so it's proving difficult to find pulleys. Looking forward to the needle and thread video very much! Are there different naming conventions/sizes for the same needles and thread in the EU and the UK?
Hi. Thanks for your comment. With my method, there is no need to change the pully on the motor, you're just adding two additional pulleys which can be 15mm shaft. Yes there are different naming conventions around the world for both needles and threads. I will cover this in part 3.
Get video!!! Where to get that 2 fully setup inusa? Thx
Just bought a Tysew TY-3600CB-1 machine .Any chance you can tell me where to get the pully set for this machine
Take the clutch off the motor , lightly sand the flywheel and deglaze the cork clutch plate with a brass wire brush then blow any dust off, put it back together. You will be able to go as slow as you want without losing any high speed. It costs nothing. Cheers
These machines were all built to serve a purpose and clutch motors are perfectly usable and just about 100% reliable.
Really enjoy your very instructive videos. Thanks for posting them. Quick question. What is the synchro thing on the balance wheel? What does it do? And does this machine come with one from the supplier.
Quick question is really 3. Sorry
It just keeps the rhythm of the stroke of the needle. It comes with the machine.
Thanks for the vids, super helpful. The links seem to be broken, though? Is your website still live?
Hi Gordie, I am in Canada. Where can I buy the pulley system in either Canada or the US? I am not handy at all and the link is not working.
Hope you are okay Geordie. Website doesn’t seem to be working
Can’t find the link for your Tysew 3600
Speed reducer
Any suggestions on proper belt tension, thanks Alot
Generally, a 1cm flex at the mid-point is considered the ideal for belt tension.
I have a singer 491 and finished fine tuning it. I am noticing that the reverse will work for longer stitch lengths. 6-8 but then the feed dogs will be in a stationery position and material doesn’t move. I a don’t know if this is normal for industrial machines or not
Hi, useful video, thank you. Could you tell me where to get a ready-made speed reducer for this machine please? Plus, does it matter which servo motor to use?
Hello Magsmog. Sorry, I don't know. The original suppliers no longer sells them.
@@HobbyBloxs Np, thanks anyway. :)
Can I reduce the speed on a Tysew 3600? I am finding it too fast when top stitching. Thank you
great tuto great you! bravo you convince me! with your system:device is it possible to obtain step by step speed?
Yes. Once the reducing system is fitted you just press the pedal very gently and the machine will stitch one stitch at a time.
@@HobbyBloxs Thanks Sir!
@@HobbyBloxs i cant find the link to order this device.
Hi Geordie, thank yoy for such useful video. I live in the UK and was looking for pre-tapped pulleys, where can you get hold of them?
I bought mine from eBay.
@@HobbyBloxs Thanks for response. I ended up 3d printing my own pulley and it works like a charm!
@@jarosawkus1976 can you share the files for the pulley?
Hi. Great video, very useful. I’m doing the same mod on my highlead machine. Is there an easy way to determine what belt lengths I’ll need before I’ve bought the pulleys? Also I notice you used a 110mm large pulley but stated it was a 135mm, I’m assuming you meant to say 110mm? Thanks again.
Hi. If you are a whiz at maths, then there probably is a way. But, like most folk, you'll have to wait until you have your pulleys and measure the distance with a piece of string to calculate the belt lengths. Yes, I meant to say 110mm.
Thank you for your response. 👍👍
Why not just put a smaller pully on the motor?
Hi, my brother db2 722 has suddenly started sewing at very slow speed; not sure why. I did get fabric stuck in bobbin area which I had to cut out. Please help.
Thank you for your comment on Geordie's UA-cam channel. Geordie has been away dealing with some health problems but is returning to UA-cam very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.
The installed picture looks like this:
There is no speed deceleration on the 135mm pulleys installed from the motor pulleys.
(Is the diameter of the 135mm pulley longer than the motor pulley?)
And speed deceleration appears in the part connected to the sewing machine pulley at the installed 45mm. Is the speed reduced by a third here?
Thank you for your comment on Geordie's UA-cam channel. Geordie has been away dealing with some health problems but is returning to UA-cam very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.
could i use this machine to sew bags without slowing down
No. You can't control the stitch when the speed is too high.
Great video...I would like to buy a new motor but i am confused between a 550w and 750w...which one is better to slow down?
Thank you for your comment on Geordie's UA-cam channel. Geordie has been away dealing with some health problems but is returning to UA-cam very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.
did you move the bottom pulley on the motor to the right
Thank you for your comment on Geordie's UA-cam channel. Geordie has been away dealing with some health problems but is returning to UA-cam very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.
It would he looked far neater putting the pulleys underneath the table..
I have some stuff under the table I don't want caught in a pulley.
@@jameskeating2542 I keep my work area clear.
Geordie can you help please? I bought this machine for my bag making. The machine on its slowest speed is still too fast when top stitching my bags. My husband doesn’t have the tools to convert it for me. Do you know how I can find a company that will come to my home and install a speed reducer for me? I just can’t find anyone here in Buckinghamshire.
Hello Di. Sorry, I don’t know if anyone that provides this service.
@@HobbyBloxs thanks for replying, I have emailed Tysew to see if they can help
🥰🥰
Hello gil laurencee. Thanks for your comment. It means a lot.