That's funny now. :) Did you prime the filter? Turn ignition on and off two three times and crank the engine until it will start. Also observe the pump noise when you turn ignition on.
Hello brother, I never had such experience. Even if the fuel filter is clogged the fuel pump must turn when you turn on the ignition. Have an inspection, start from the fuses and followed by fuel relay. If the vehicle has more than 200,000 km check fuel pump itself.
@@MechanicAnoop I've never heard this noise in any other car before, strange thing is if i have over half a tank of fuel it doesn't do it, also sometimes it takes a while to start, if i turn the ignition on and wait for the lights to go out it'll start straight away.
Superb video, no music,no nonsense, simple video, full information. Thanks to videographer
I'll convey, thank you so much!
Thank you for this video !
Glad it was helpful!
I replaced the fuel filter with help of your video. But now car not starting. All connections are ok
That's funny now. :) Did you prime the filter? Turn ignition on and off two three times and crank the engine until it will start. Also observe the pump noise when you turn ignition on.
Great video, clear way how to do it, thank you
So good baby 👏🏼👏🏼💪🏽💪🏽👌🏻👍🏼👍🏼👍🏼
Perfect video
Glad you think so!
Juesus... on my previous WV cars, it was 3 minute work under car. Just unplug pipe on one side, on other side, replace filter can, plug it back
Asian cars seem to put it in the tank as integrated.
Brother would fuel filter being clogged would it stop the pump from working? The car isn't starting I cannot hear the fuel pump at all.
Hello brother, I never had such experience. Even if the fuel filter is clogged the fuel pump must turn when you turn on the ignition. Have an inspection, start from the fuses and followed by fuel relay. If the vehicle has more than 200,000 km check fuel pump itself.
@@MechanicAnoop car done 60k, I'm going to check fuse and relay. How would I test the fuse and relay? Test light? Would multimeter also work?
You can use multimeter for fuses so that you won't need to remove fuse, For relay use a 9V small battery.
My pump makes a loud whining noise when i first start up then goes away, any ideas what it could be?
It's the initial fuel pressure preloading before starting. Just normal thing for petrol engines.
@@MechanicAnoop I've never heard this noise in any other car before, strange thing is if i have over half a tank of fuel it doesn't do it, also sometimes it takes a while to start, if i turn the ignition on and wait for the lights to go out it'll start straight away.
What is the brand code of the fuel filter buddy? My car is hyundai i10 (2009)
I assume your engine is 1.2
Then try this - ADG02386
Why change fuel filter ? What is the problem
Stuttering and performance issues.
@@MechanicAnoop is it possible for it to idle out of this?
I don't understand your question.
@@MechanicAnoop my car stopped work at idle
@@MechanicAnoop is the problem with the fuel filter
Y en diésel.¿
I don't have the diesel version for now 😊