The stock pads on those ZRace Four piston are shit. Try replacing those pads with a better pairs of pads and i guarantee you, those pads are gonna be biting ur rotors.
Не корректные сравнения, потому что тормоза выходят на полную мощность, после их притирки. И на тормозах ZRace колодки среднего качества, но если поставить хорошие, то они отлично тормозят.
Interesting... One user said to change the pads(needs to be breaked in first) which is a good suggestion. and i got a question for your testing methodology if you your tried testing each brakes at least 3 times with different road condition then get the general time of each condition?
Times from China that come ultra cheap may not have the same quality control as SRAM. So over a longer period I’d doubt they would fair as well as SRAM. A single break test like this would not determine their over all quality control.
1 Sram brake lever cost the same as the zrace brake set.
The stock pads on those ZRace Four piston are shit. Try replacing those pads with a better pairs of pads and i guarantee you, those pads are gonna be biting ur rotors.
Thanks for the tip I’ll give that a try
Не корректные сравнения, потому что тормоза выходят на полную мощность, после их притирки. И на тормозах ZRace колодки среднего качества, но если поставить хорошие, то они отлично тормозят.
Interesting... One user said to change the pads(needs to be breaked in first) which is a good suggestion. and i got a question for your testing methodology if you your tried testing each brakes at least 3 times with different road condition then get the general time of each condition?
I still wont run anything other than Hope tech 4 V4’s
Times from China that come ultra cheap may not have the same quality control as SRAM. So over a longer period I’d doubt they would fair as well as SRAM.
A single break test like this would not determine their over all quality control.
Worse than SRAM is bad
Bro only tested front brakes... just trynna make sram look better
I could care less about sram