#303
Вставка
- Опубліковано 4 лип 2024
- [Builder's view] Tamiya 1/24 Subaru Impreza WRC '98 Monte-Carlo is in progress.
When you open the door, you can see the carbon panels covering the roll cage. In the kit, they are dented, so I'll fill them in.
I'll install magnets in the light pod so it can be attached and detached. Just in case.
I will make tweets such as the announcement of the start of the live broadcast on X(Twitter)
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Web site nandemo-seisaku.com
The photos of the finished product are summarized here plamodel.info
Facebook page / nandemoseisaku
Contact info@nandemo-seisaku.com
#scalemodel - Навчання та стиль
Excellent work, as always. Personally, I think that the night driving light pod makes the car look very ugly, but other people will disagree. Thank you and best wishes Kenji-san.
A simple solution and very affective. As usual, it's a very enjoyable video. Thank you
Muy buen trabajo. Es una delicia verte trabajar. Un saludo.
いきなりOne more time,One more chanceをぶち込むとは😂
ちょっと何言ってるか分かりません😂
@@kenji-plasticmodels
資料集めって結構大変ですよね🤔
時間も忘れて探しても欲しい資料に辿りつかなかったりするんですよね😅
これからも応援してます、頑張ってください
あ、明け方の街や桜木町にも行かれたんですよね❓😆
Nice job Kenji !
お疲れ様です。
ドアを開けてしまうと見える部分の工作、情報量が一気に上がる分、作業量と求められる技術レベルも跳ね上がりますね。
まあ、でもKenjiさんですから、サクサク作ってしまうのだろうなぁと思っていたら、あっと言う間でしたね。😅
ライトポッドの磁石仕込みも無事完了ですねー。
この型のインプが街中に溢れていた頃、自分はGT-Rをコロがしていたのですが、よく煽られましたねー😅
自分のは最高速仕様にイジっていたので、街中では相手にしませんでしたが、そんなこともあってこの型は印象深いです。😊
次回も楽しみにしております。
お疲れさまです。
本当にそうなんですよ、ドア開けるだけで作業量がもう全く違います😅
全然サクサク出来ないですよー。
GT-Rに乗っていたんですね羨ましい。
Super legal seu trabalho, 👏👏👍👍🚙🚙😄😄🙏🙏
ドア開閉の為(笑)サイドバーの部分丸見えになりますね~🙂改修おつかれさまです😀
Hi Kenji, everything is coming along nicely. The roll cage doors look much better now. The light pod is so unusual, and over the top, but it really is a cool aspect of the overall look of the car. Your research shows through. I think the lights, and the light pod will be fine for detaching, and reattaching. Thank you for sharing, and have a great weekend.
Hi Brian, thank you. Light pods might have their fans and detractors due to their design, but I personally like the function-focused design that is characteristic of rally cars.😊
山崎まさよし
ありがとうございます🙏☺️
😎😎😍😍😀😀😀😀😀😀😀😀😀
骨組みの上に板を貼ることをを私たち(模型飛行機工作)は「プランク」と呼んでいます。このロールケージのカーボンパネル(内部の鉄板)の役割りもそのようなもの(剛性確保)かもしれません。
そうですね、そのとおりだと思います。
そして強度的に無くても良いという判断で、内側だけパネルが外されたのでしょう。
探すのをやめたとき見つかることもよくある話ですよ
違う歌になってる😂
I hope that was the chair ar 2:28 😂😂
ロールケージの映像ですが
ラリーの映像ではなくて、モタスポフェス2019鈴鹿の映像
「IMPREZA WRC 98でWRC栄光時代を振り返る!!」
で、初期型?の内装の細かい部分まで確認することが出来ました。
車も、コリン・マクレー車のようですが、これとは違う?
ua-cam.com/video/NA-WAZ6CeZM/v-deo.html
これはモンテカルロ仕様のクルマではないんです。別のレースのやつです。
例えばルーフのベンチレーターがセンターに1個だけとか仕様が異なります。
でもありがとうございました😊
Kenji one time more you Show as a incredibal job well dan mister perfect!... PS can you say mi what is this wite stone you use for gridding?
This is a zirconia rotary burr.
@@kenji-plasticmodels thanks mate 😊