How to start your sand filtration system for the first time

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 36

  • @SowRoll024
    @SowRoll024 Рік тому +34

    If you shut off the valves where does the back wash water come from?

  • @sour_hxribo
    @sour_hxribo Рік тому +5

    for my first time building an above ground, youre the ONLY ONE who explain what goes where 😂 great in depth video THANK YOU!!!

  • @robincombs6023
    @robincombs6023 2 роки тому +12

    Thank you for making it so simple. My dad always did this but he passed unexpectedly and I've never had to. I was lost until now!

  • @TapedFromFlorida
    @TapedFromFlorida Рік тому +6

    Always rinse the sand after backwash before going back to normal filtration

  • @awakecanadian5472
    @awakecanadian5472 4 роки тому +2

    Excellent video guys!! Thanks

  • @sussexmanatee10
    @sussexmanatee10 Рік тому

    Thank you !

  • @amberswarey5693
    @amberswarey5693 Рік тому +1

    How do I empty the basket? There is always water pressure and i cant figure out how to stop the water, even with the pump off.

  • @CODstreamz
    @CODstreamz Рік тому +6

    It's letting air OUT of the system not IN the system.

  • @brendapeel6026
    @brendapeel6026 Рік тому

    Is it normal to have air bubbles in the filter or does it need to be water 💦. If that makes sense

  • @oldiesbutgoodies5213
    @oldiesbutgoodies5213 Рік тому +2

    What is a pool frog? Is that the original pump?

  • @richardrodriguez8915
    @richardrodriguez8915 4 роки тому +5

    Do you put water in the tank where the sand goes before you do all of this?

    • @jenniledford1280
      @jenniledford1280 3 роки тому +2

      I need to know the answer as well

    • @RealLifeFinance
      @RealLifeFinance 3 роки тому

      Recommended but not 100% necessary

    • @AndreOutlaw
      @AndreOutlaw 3 роки тому +3

      Every person I've spoken with, as well as the manual that came with the filter, states that you should add water to the filter before or while adding sand. This is to prevent damage to the pipe that runs down the center. So there should be a decent amount of water already in the filter.

    • @Abovegroundpoolbuilder
      @Abovegroundpoolbuilder  3 роки тому

      @@AndreOutlaw When filling the pool for the first time the water is gravity fed into the filtration system. As a rule, when installing the sand it's a good idea to put water in the tank before sealing it up.

  • @donthaveaname743
    @donthaveaname743 3 роки тому +30

    You forgot to rinse before going back to filter. Rinse resets the sand.

    • @Abovegroundpoolbuilder
      @Abovegroundpoolbuilder  3 роки тому +5

      Yes I did and very important to rinse the head out first, Thanks!

    • @OutsiderLXIX
      @OutsiderLXIX 2 роки тому +2

      please explain.....what do you mean rinse out the head? I'm on this video bc when I started my filter for the 1st time after winter, I had like ZERO pressure. so I'm hoping what you said in this video does the trick. But what about this rinsing the head part?

    • @BrightthgirB
      @BrightthgirB Рік тому +1

      Do you rinse after backwash?

  • @killoffdembumba
    @killoffdembumba Рік тому +3

    Short and sweet

  • @case12314
    @case12314 4 роки тому +2

    What if you don't have your shut-off valves installed at the skimmer and at the return? Will you still be able to backwash or do you have to have the shut-off valves in order to do?

  • @YT_Aorta
    @YT_Aorta 2 роки тому +1

    I forgot to add water into the tank when I filled it up with sand, can I add water at the pump ? Or should I “prime it “

    • @Abovegroundpoolbuilder
      @Abovegroundpoolbuilder  2 роки тому

      it's ok, let gravity fill the system. Keep valves open and let the water fill tank on it's own. Take care to let the air escape the system by burping the lid.

  • @angelamarroquin9669
    @angelamarroquin9669 2 роки тому

    Waterway sand filter 19" 1.0 hp
    My brand new pool is not working and I have no idea why or how to fix it. 0 PSI, no suction from skimmer nor main drain. Filter mode leaks from waste pipe. No leaks anywhere. Water is midway on skimmer. Flap is moving. I just have no clue what to do. Bypass to waste does work but also does it on filter.

  • @mandibybee1210
    @mandibybee1210 4 роки тому +2

    I just installed a 16” TWM Waterway sand filter and when I turn the dial to anything other than closed, water pours out of the backwash line. Any idea what’s going on? I am new to sand filters. Thanks

    • @Abovegroundpoolbuilder
      @Abovegroundpoolbuilder  4 роки тому +1

      Backwash hose isn't collapsing fully and it's sucking from the filter. Try rolling up the first few feet of collapsible hose to prevent water from finding an easy exit.

  • @oldgrizzlygamer
    @oldgrizzlygamer Рік тому +1

    How did you do those valves?

  • @marieuy-nf3to
    @marieuy-nf3to Рік тому

    Where can I buy the valve setup you have?

  • @juanceballos6484
    @juanceballos6484 4 роки тому

    Very helpful video! Thx

  • @artzap87
    @artzap87 Рік тому +2

    Always turn it clock wise, never counter clockwise.

  • @AnastasiaHaynes-g6q
    @AnastasiaHaynes-g6q Рік тому

    Starting a salt water pool, how much sand do I need to add?

  • @thebear6529
    @thebear6529 Рік тому +2

    You forgot to mention to rinse after backwashing. So most people who will watch this clip, will get nowhere.

  • @robertorosales5774
    @robertorosales5774 Рік тому

    I have a question, what’s your phone number above ground pool builder ????

  • @keilavelazquez9399
    @keilavelazquez9399 3 роки тому

    Thank you!