Leg-end mate. Thank you so much for this video. I have a error code 12 on a fz1n 2008. Intermittent error as sometimes it starts and sometimes not. Ive just ordered a new starter relay and after seeing your video I'll know what to expect with the replacement and how to go about it. Really appreciate you. Thank you again.
Thank you for the awesome video! I had the same problem on my Fz-07. Bridged the terminals and fired right up. Check engine light went out as well. Ordered a new relay. Thanks man!
Had the same error code on my FZ6 but the fault came from the starter itself - there was some damage to the positive lead insulation and the brushes were completely worn out. Replacing the starter solved all the issues. It was fortunate though that I was able to push-start the bike at least I could drive it while the defect was present :).
Gracias viendo este video en Puerto Rico logre encender la motora y llevarla a mi casa. Eso me ahorro dinero en grua y mecanico. Gracias nuevamente Dios contigo siempre
Hi friend! I have a yamaha xj6 and I have error 12, but the error shows that the sensor does not receive normal signals from the position of the crankshaft, could you help me? (the motorcycle turns off when driving)
Yeah, if your starter relay is bad, then no energy would be sent to your starter. Try to bridge the gap on your starter relay terminals and see if the bike starts (1:50). If the bike starts, that's a good indicator that your starter relay is bad.
For everyone whos R1 with a new relay wont keep idling when releasing the starter button, some aftermarket starter relays have their poles switched from the original. The small metal plate going to the fuse it swapped to the other pole!!
I have a 2007 R1 and same thing except on mine even when I bridge it it wont crank because I also need a battery it drops to 5 volts when trying to crank but I believe I need a new battery and a new relay
@@TheLegendaryLoso I have an 08 I replaced the starter relay twice and it won’t crank even after I bridge the 2 terminals. Checked the clutch and kickstand relay all checks out good. Like you I’m stuck here. Post if you find a solution I will do the same if I can figure out the problem.
Absolute legend, thanks heaps for uploading this. You have actually saved me so much money and time.
Leg-end mate. Thank you so much for this video. I have a error code 12 on a fz1n 2008. Intermittent error as sometimes it starts and sometimes not. Ive just ordered a new starter relay and after seeing your video I'll know what to expect with the replacement and how to go about it. Really appreciate you. Thank you again.
Just got this exact issue on my 2010 r1 glad i saw this vid and also saw the guy with the 4 wheeler vid too hopefully this helps for me!
Thank you for the awesome video! I had the same problem on my Fz-07. Bridged the terminals and fired right up. Check engine light went out as well. Ordered a new relay. Thanks man!
I am glad this video helped you.
Damn dude this was very in depth appreciate you 🙏🏻
Top man, this will help and save people a lot of money well done, this also works for many models of bikes.
Thanks, man. I appreciate the comment.
⁵⅘5⁵⁵⁵⅚53⁵55⁵⁵⅚⁵⁵55⅚⁶⁵e55we56e5w⁶⁶q¹
Just like everybody else. I have to give it a shot. Thanks for your tips. Ride safe!
Had the same error code on my FZ6 but the fault came from the starter itself - there was some damage to the positive lead insulation and the brushes were completely worn out. Replacing the starter solved all the issues. It was fortunate though that I was able to push-start the bike at least I could drive it while the defect was present :).
WOW, Great video. That error 12 code can be very costly if you dont know this info, awesome video, thanks for posting. Greatly helpful...
Thank you for helping me fix this!!
You’re a god thanks for making this
I replaced the selenoid but im still getting a click when I try to turn it on. I’m not sure if it’s the starter or the crankshaft position sensor.
Gracias viendo este video en Puerto Rico logre encender la motora y llevarla a mi casa. Eso me ahorro dinero en grua y mecanico. Gracias nuevamente Dios contigo siempre
Thanks bro for this video I solve my problem with this video thank you so much I’m riding Yamaha Fazer 8
Great job man! I hope I can get mines started. With my bike which is an fz6r, you can hear the engine trying to turn over but it just won’t.
Did the er_12 disappers when u fix the new relay and turn the key on?
I wish this would of helped mine brand new starter relay and still click might be the actual crankshaft position sensor
Hi friend! I have a yamaha xj6 and I have error 12, but the error shows that the sensor does not receive normal signals from the position of the crankshaft, could you help me? (the motorcycle turns off when driving)
My bike cranks but does not fire up, is it what you had or its a completely different issue? its shows code P0335 which is code 12.
Great video, I’ve just got this error 12 on my bike too I’m guessing I have no spark due to the error code being displayed ?
Yeah, if your starter relay is bad, then no energy would be sent to your starter. Try to bridge the gap on your starter relay terminals and see if the bike starts (1:50). If the bike starts, that's a good indicator that your starter relay is bad.
When i hit the starter button i get a click from the starter relay does this mean my crank shaft sensor is shot?
Try to bridge the terminals on your starter relay. If the bike starts, it may just be a bad starter relay.
@@bigliss9040 dumb question here, how do I bridge it? I got the 2007, so its almost underneath the tank
For everyone whos R1 with a new relay wont keep idling when releasing the starter button, some aftermarket starter relays have their poles switched from the original. The small metal plate going to the fuse it swapped to the other pole!!
I have a 2007 R1 and same thing except on mine even when I bridge it it wont crank because I also need a battery it drops to 5 volts when trying to crank but I believe I need a new battery and a new relay
Really hope it works
Same, I hope everything works for you.
I got a new battery and tried to bridge it still no luck what's the next move?
@@TheLegendaryLoso I have an 08 I replaced the starter relay twice and it won’t crank even after I bridge the 2 terminals. Checked the clutch and kickstand relay all checks out good. Like you I’m stuck here. Post if you find a solution I will do the same if I can figure out the problem.
@@eccruzin1you ever find a solution??
How did u know this was the problem?