Yamaha fx ho cruiser engine rebuild part nr.5 / cylinder head, camshafts and timing chain install

[@vikiporelmundo2420]

I like your videos because without talking you explain very well how much pressure is on the head screws.

[@valeriumoscalu7580]

🤣🤣🤣

[@zacbaxter]

Thanks! I have this same jetski. Someday it will break, and nice to see this torn down and reassembled.
280hrs and still runs like a clock. All salt in water

[@alaefarmestatesllc]

U gotta open it up again and show us how you did the timing. Lol. I know there’s marks, but don’t they move out of timing when tightening things back down?

[@SWFLJetSkiRiders]

How u aligned the timing ?

[@Braderlinger]

Is this the same block you discovered was damaged when you removed the oil pan

[@valeriumoscalu7580]

Yes

[@terpsquirter7107]

This dumb fuck grenaded his engine now doubts he thought the buckets needed to be reinstalled in the same place but put the shims back on the retainers wherever he felt like 😂😂😂I’m dead and you didn’t even time the thing right wtf 🤦🏼😭😂

[@Braderlinger]

Is there a part 3

[@valeriumoscalu7580]

Yes there is a whole disassembly and assembly process and engine installation

[@rody1202]

how did you know where to set the timing chain on the Cams?

[@valeriumoscalu7580]

There are the timing marks on the camshaft sprockets! And also is a mark on the crankshaft! You should set them so the first cylinder will be in the top dead center at compression stroke!

[@aminnaga769]

​@@valeriumoscalu7580 hi, you have service manual for this and can you share with me Sir.?

[@SWFLJetSkiRiders]

That's not the 140 or 1100... that's 1.8 mr1.

[@vikiporelmundo2420]

I like your videos because without talking you explain very well how much pressure is on the head screws.

[@valeriumoscalu7580]

I said about what should be the head bolts torque!