Dewalt 18v DCH273 sds drill running but not hammering. Broken Crankshaft. How to repair.

Another Dewalt DCH273 brushless sds drill in for repair. Get a lot of these in for repair, but we also sell quite a lot.
They are extremely popular cordless sds drills, and anyone on the dewalt platform probably has one.
They are a solid drill and very comfortable to use. They do see a lot of work, and they have a good hammer action.
But they are not without their faults.
They are basically the same design are the old nicad 24v sds drill. same layout and gearbox.
when dewalt tool out the brushes 18v lithium sds drill, they simply took the 24v gearbox and fitted and new motor and body.
This was fine, as the power and speed were roughly the same.
But when they took out the brushless motor, they again used the same components in the gearbox. The brushless motor is simply too powerful on some of the components, and they eventually fatigue and fail.
Dewalt took a lazy approach and checked the tolerances of the components with the extra power from a brushless motor.
The parts that fail are, the cam shaft shearing, the con rod snapping, the hammer pipe ring spring clip failing, and the piston drying out.
But it is worth noting that they normally do quite a lot of work before these parts fail.
And as a while, they are a good drill, as they are easily ams cheaply repaired again.
#dewalt #dewaltrepair #dch273 #sds #dewaltrepair #dewaltsds #tools #powertools #repair #toolrepair #fix #deandohertygreaser #machine #howto #toolporn #teardown

[@repairs524]

Again Dean absolutely great to know how much the repairs cost and well worth it considering the price of them new

[@SkilledLabor]

Nice work as always

[@Binbag1010]

That was a complicated beast.

[@carlpayne8008]

Awesome job 👍

[@jamestoledo3667]

Nice work ! Saludos de México

[@joysylad1985]

I took mine apart fixed what I saw was a dodgy live wire spade connector but I've come to put it back and I have a little spring attached to what looks similar to a rivet any idea where this goes?

[@deandohertygreaser]

That is the battery retainer spring. It pushes back on the battery retainer to keep the battery ingaged during operations.
It simply pushes in-between the housing and the back of the battery contacts retainer. You will have to open it again to fit it, or simply leave it out. Will still work fine without it

[@davelaye7003]

@@deandohertygreaser thank you for asking the question and the reply. i has the same issue. did not know where it came from

[@DanielMartinez-fm4oo]

There’s another one that looks like a bobby-pin and that one goes right beside the hook and it helps the hook not to slide out or slide in by it self.

[@FryingMike]

Thanks

[@deandohertygreaser]

No problem

[@mcluvin28x]

Wish i could see how you wash them out

[@deandohertygreaser]

Ill try include the cleaning when possible

[@abdalqadr1]

I like that
How can i buy the same one❤❤❤❤

[@nsoutlawball1941]

@0:05 The drill bit weeble wobbles like my Dewalt DCH263B ( 6 weeks old, no chipping use yet ) Would you consider this normal? makes it hard to place the anchor hole precisely as the bit wants to dance around the Qdeck surface first, also makes less than an ideal seal around the bristles of the DWH205DH Dust Extractor allowing larger dust chunks to fall through. I can see the chuck by itself is clearly wobbling, my drill bits are new and clearly not the problem. Also, what kind of grease is ideal for these tools?

[@gnomeclips1016]

I changed the crank shaft put all back together and it snapped the new one

[@sergioulloa6928]

Mine does not make the knocking it is heard but it does not, the gasket and the piston were changed, what could it be?

[@arifqureshi9928]

I have dch 273, the problem is loud knocking sound when drill run, I open it and found all ok, what will be the problem ??

[@PLKazik]

Can You give me number of parts to change ?

[@aeroekins5415]

Where do you buy parts my Irish feller

[@vasiltop]

What is much quality makita dhr 243 or this DeWalt tank's. Greetings from Bulgaria

[@deandohertygreaser]

makita is much better quality

[@vasiltop]

Thanks

[@Saved_Sof]

@@deandohertygreaserI bought the Makita DHR 242 for only 50€ off a fella with a broken selector switch because I saw one of your videos I knew I could fix it 😄

[@johnknowles6685]

what grease did you use ?

[@85buick307]

It’s a Bosch heavy grease you can find it online it’s bosch’s spec’d out grease for their hammers and equivalent to all the other manufacturers works well in hammers

[@ObedOmarMunozCastillo]

Where can I get the spare part?

[@hectorgalaviz4745]

También me interesa donde conseguir el repuesto???

[@ktheo9640]

How much for you services ?

[@pineapplesideways3820]

It's dewalt what you expect makita any day after hilti and fien