Це відео не доступне.
Перепрошуємо.

Smart car 451 P0451/P0452 fixed for $20 in 60 min

Поділитися
Вставка
  • Опубліковано 11 вер 2022

КОМЕНТАРІ • 18

  • @oulie2309
    @oulie2309 5 місяців тому +1

    What were the symptoms for this my fuel pump ain’t making more than 18psi of fuel pressure

  • @happycamper3455
    @happycamper3455 Рік тому

    ...This is great info thx ..i have the same code even after replacing the gas cap and the purge valve going to try your solution..

    • @CyberBrySkyNet
      @CyberBrySkyNet 7 місяців тому

      I had EVAP codes and after replacing the purge valve and then the charcoal box, I dropped the tank and saw that my fuel filter assembly cap was cracked right apart. No codes after replacing that. It's better to take it all apart and inspect the system before throwing parts at it guys.

    • @happycamper3455
      @happycamper3455 7 місяців тому

      @@CyberBrySkyNet After taking the car to a reliable shop they discovered a broken wire .. it was bypassed with a new wire and everything is good now..best part it was a cheap fix thanks to a good mechanic.

  • @htowner1327
    @htowner1327 Рік тому

    Does this really work

    • @reedjamescustom
      @reedjamescustom  Рік тому +1

      Yes and is still working today

    • @htowner1327
      @htowner1327 Рік тому

      @@reedjamescustom I did it and it works .it didn’t take my check engine but I have one more sensor to do

    • @reedjamescustom
      @reedjamescustom  Рік тому

      @@htowner1327 the code should drop off after 100 miles if there is another problem the check engine lite will still be on but will be a different code

    • @reedjamescustom
      @reedjamescustom  Рік тому

      The p0451 and p0452 will disappear

  • @MrMr123
    @MrMr123 4 місяці тому

    What do you have for a map sensor cross reference?

    • @luispenick7448
      @luispenick7448 Місяць тому +1

      I'm looking for the map sensor lol

    • @MrMr123
      @MrMr123 Місяць тому +1

      @@luispenick7448 You have to drop the engine to get to it. Its up by the firewall, behind the passenger seat on the engine.... If you lift the car you can see it. or cut a hole in the firewall behind the passenger seat..... See if you see atmospheric pressure reading on the sensor before taking that sensor on

    • @luispenick7448
      @luispenick7448 Місяць тому +1

      @@MrMr123 thanks man.

    • @luispenick7448
      @luispenick7448 Місяць тому +1

      @@MrMr123 do you think I could get to it just by taking one engine mount on the right side of the car by the alternator or do I need to take all three off

    • @MrMr123
      @MrMr123 Місяць тому

      @@luispenick7448 I think you should hook up an OBD2 scan tool and see if it reads 14.7 psi
      Which is atmospheric pressure with the car off
      If it sees that number, sensor is fine.
      From the front looking back
      Sensor is about 6-8” to the right of the alternator under a bunch of ac coolant lines
      You have to drop the 4 bolts that hold the motor
      How many miles does your whip have?